3
764
General Purpose Vinyl Tape
Technical Data
April, 2014
Product Description
3M™ General Purpose Vinyl Tape 764 can be used in non-critical applications such
as color coding, bundling and safety marking, etc.
Product Construction
Backing
Polyvinyl
chloride
Adhesive
Rubber
Color
Yellow, white, red,
black, blue,
transparent, green,
orange, purple,
gray, brown
Standard Roll Length
Yellow, red and white:
1", 2", 3", 50" x 36 yds.
(25 mm, 50 mm, 75 mm, 1250 mm* x 33 m)
All other colors: 1", 2", 50" x 36 yds.
(25 mm, 50 mm, 1250 mm* x 33 m)
*Log rolls are untrimmed, approximately 49" usable material.
Typical Physical
Properties
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel:
Tensile Strength at Break:
Elongation at Break:
Total Tape Thickness:
Temperature Use Range:
18 oz./in. width (21 N/100 mm)
13 lbs./in. width (228 N/100 mm)
180%
5.0 mils (0.125 mm) nominal
60° to 85°F (16° to 29°C)
D-3330
D-3759
D-3759
D-3652
Features
• While vinyl tapes resist most common solvents, care should be taken to avoid
ketones, chlorinated hydrocarbons and esters found in lacquers, thinners,
degreasers, paint strippers, etc., which may cause the backing to swell or curl.
• Pigmented vinyl backing to conform to many irregular surfaces.
• Rubber adhesive for good instant adhesion.
Application Techniques
• Best results are attained when applied to a clean, dry surface at temperatures
between 60° to 80°F (16° to 27°C).
3M
™
General Purpose Vinyl Tape
764
Application Ideas
• General purpose holding and color coding.
• Temporary marking of parts or machines.
• Protect parts, equipment or products from abrasion.
Storage
Store under normal conditions of 60° to 80°F (16° to 27°C) and 40 to 60% R.H. in
the original carton.
Shelf Life
To obtain best performance, use this product within 18 months from date of
manufacture.
Technical Information
The technical information, recommendations and other statements contained in this document are
based upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Product Use
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect
the use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty,
Limited Remedy,
and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY
OR CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE.
If the 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s
option, replacement of the 3M product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
3
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
Recycled Paper
40% pre-consumer
10% post-consumer
3M is a trademark of 3M Company.
Printed in U.S.A.
©3M 2014 (4/14)
京公网安备 11010802033920号
EEWORLD
