Product Data Sheet
Product Data Sheet
3M
™
Metal-Out Static Shielding Bag 1500
This transparent metal-out static shielding bag is designed to provide a static safe
environment for sensitive electronic devices. Bags are printed with an ESD warning
symbol and a lot code for traceability. Open top and ZipTop styles are available. The
bags are heat sealable.
3M Static Shielding Bags are manufactured from a top coat, metal, polyester,
polyethylene laminate. The proprietary top coating is designed to protect the metal
layer. Polyester dielectric, in concert with the metal layer, is intended to provide
shielding of Electrostatic Discharge (ESD) and to help minimize the penetration of
electric field.
These bags are tested to meet or exceed certain electrical and physical requirements
of ANSI/ESD S541 and to be ANSI/ESD S20.20 program compliant. Bags are RoHS
Compliant* and lead-free**.
Physical
Typical Value
4900 PSI, 34 MPa
10 lbs, 44 N
14 lbs, 62 N
3 mils, .0762 mm +/-15%
Pass
Testing Method
Tensile Strength
Puncture Resistance
Seal Strength
Thickness
Marking Adhesion
Transparency
Electrical
ESD Shielding
ASTM D882
MIL-STD-3010C Method 2065
ASTM D882
MIL-STD-3010C Method 1003
IPC-TM-650 2.4.1
Tobias
Testing Method
ANSI/ESD STM11.31
40%
Typical Value
<10 nJ
<1x10
11
ohms
<1x10
6
ohms
Surface Resistance -
Interior
Surface Resistance -
Exterior
Static Decay
Charge Retention
Cleanliness
Silicone
Heat Sealing Conditions
Temperature
ANSI/ESD STM11.11
ANSI/ESD STM11.11
ETS 406D
CPM-3M TP.21XX
Testing Method
FTIR
< 2 seconds
<100 volts
Typical Value
Not Detected
Typical Value
300ºF – 375°F, 149ºC – 190°C
0.5 – 3.5 seconds
30 – 70 PSI, 206 – 482 KPa
3M
™
Metal-Out Static
Shielding Bag1500
Time
Pressure
This product is intended for commercial use only. This product is not on the Qualified Product Listing
under the Defense Standardization Progam.
Product Data Sheet
3M Metal-Out Static Shielding Bag 1500
™
Open
Open
Bag
Bag
Top
Top
ZipTop Bag
ZipTop Bag
3M Metal-Out Static Shielding Bags, Open Top 1500
Dimensions
(W x L in.)
3x5
Part No.
15035
15046
15058
15068
Dimensions
(W x L in.)
Part No.
Dimensions
(W x L in.)
Part No.
8 x 12
9 x 12
10 x 12
10 x 14
10 x 24
11 x 15
12 x 16
150812
150912
1501012
1501014
1501024
1501115
1501216
12 x 18
14 x 18
15 x 18
16 x 24
18 x 18
18 x 24
1501218
1501418
1501518
1501624
1501818
1501824
Standard sizes
(inches): Width
shipment (usually same
+/- 0.125
Tolerance (inches): Width -0, +0.250
Tolerance
stocked for prompt
-0, +0.250 Length
day).
Offset 0 to 0.250
Width is
width +/- 0.125
seam to inside seam.
measured from inside
Length +/- 0.125 Offset 0 to 0.250
Seal
Length is measured from the top edge to the bottom fold.
Seal width +/- 0.125
Opening is in the “width” dimension.
Custom bag sizes, custom printing, and custom hot stamping
are available.
• Most sizes are packed 100 per case.
• Small sizes are packed 500 or 1,000 per case.
•
•
•
•
•
4x6
5x8
6x8
6 x 10
6 x 30
7 x 15
150610
150630
150715
Custom Sizes and Printing Available.
3M Metal-Out Static Shielding Bags, ZipTop 1500
Dimensions
(W x L in.)
3x5
Part No.
150Z35
Dimensions
(W x L in.)
Part No.
Dimensions
(W x L in.)
Part No.
6x8
6 x 10
8 x 10
150Z68
150Z610
150Z810
10 x 12
12 x 18
12 x 18
150Z1012
150Z1218
1911218
Important Notice
All statements, technical information, and recommendations related to 3M’s products
are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for
your intended application. You assume all risks and liability associated with such use. Any
statements related to the product which are not contained in 3M’s current publications, or
any contrary statements contained on your purchase order shall have no force or effect unless
expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for one year from the
time of purchase.
3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT
LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE.
If this product is defective within the warranty period
stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M
product or refund the purchase price of the 3M product. Except where prohibited by law, 3M
will not be liable for any indirect, special, incidental or consequential loss or damage arising
from this 3M product, regardless of the legal theory asserted.
4x4
4x6
150Z44
150Z46
Custom Sizes and Printing Available.
3M is a trademark of 3M Company. All other trademarks are owned by their respective companies.
*
RoHS 2011/65/EU Compliant
means that the product or part does not contain any of the substances in excess of the maximum
concentration values (“MCVs”) in EU RoHS Directive 2011/65/EU. The MCVs are by weight in homogeneous materials. This
information represents 3M’s knowledge and belief, which may be based in whole or in part on information provided by third party
suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information, then 3M’s entire liability and Buyer’s exclusive
remedy will be in accordance with the Warranty section.
**Lead-free means that the product has less than 2 ppm of lead when tested by ICP-AES, with reference to EPA method
3051A/3052.
3
Electronic Solutions Division
Static Control Products
926 JR Industrial Drive
Sanford, NC 27332
Toll-Free: 866-722-3736
International: 919-718-0000
Email: 3mstaticinfo@mmm.com
www.3Mstatic.com
Please recycle. Printed in USA.
© 3M 2014. All rights reserved.
98-0799-1154-5 JHA
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
