STATFREE T2™ DISSIPATIVE RUBBER
Color Dissipative Layer
Specifications
ANSI/ESD S20.20
Standard Document
Electrical Properties
Typical Values
1 x 10
6
to < 1 x 10
9
ohms
1 x 10
6
to < 1 x 10
9
ohms
Meets Requirements of:
Worksurface
Color Dissipative Layer
Rtt Resistance:
Rtg Resistance:
Test Procedures/Method
ANSI/ESD S4.1 and ESD TR53
ANSI/ESD S4.1 and ESD TR53
ANSI/ESD S4.1 and ESD TR53
0.060"
Rtt Resistance:
More Conductive Black Layer
< 1 x 10
6
ohms
Physical Properties
More Conductive Black Layer
Construction:
Thickness:
Color:*
Texture:*
Weight:
Hardness:
2-Layer
Grounding & Cleaning
If the material is used on top of an already properly grounded
surface,
grounding hardware
may not be necessary. Where no
properly grounded surface is available,
grounding hardware
is
required to provide a path-to-ground. Rtg compliance verification
measurements must be made as outlined in ESD TR53 with a
surface resistance meter.
See Tech Bulletin
TB-7000
for Reztore
®
Surface & Mat Cleaner
Application Instructions.
Limited Lifetime Warranty:
Dual-layer rubber material
0.060” (1.5mm)
Blue (Top), Dark Blue (Top), Dark Grey (Top), Green (Top), Black (Bottom)
Slight embossed
0.43 lbs./sq. ft. (0.2g/cm2)
65 ± 5 Shore “A”, per ASTM-D2240
Does not melt or burn when coming into contact with hot solder and soldering irons.
Resistance to degradation by inorganic acids, organic acids, reducing agents, aliphatic
hydrocarbons, mineral oil, aldehydes, and amines.
Other Properties
Heat Resistance:
Chemical Resistance:
Tolerances:
Width ± 0.250"
Length ± 0.250" every 1 linear foot of running material.
Thickness ±10%
Matting materials have a tendency to shrink slightly when first unrolled. In applications where length is critical, allow the
material to condition for at least 4 hours before cutting to size. Always using care trim with a sharp knife or razor blade.
*Color and texture may vary between lots and mills.
For product listings,
Click Here
Desco warrants for one year that Statfree
®
matting products will be free
of defects in materials and workmanship and will guarantee dissipative/
conductive mat properties for the life of the mat. Damage to matting
caused by misuse of any kind, including using inappropriate cleaners is
not covered by
Desco Limited Warranty.
RoHS 3, REACH, and Conflict Minerals Statement
See the Desco Industries RoHS 3, REACH, and Conflict Minerals
Statement:
http://www.descoindustries.com/ROHS.aspx
See the Desco Limited Warranty:
http://desco.descoindustries.com/Limited-Warranty.aspx
See the Desco Disclaimer:
http://desco.descoindustries.com/Disclaimer.aspx
Specifications and procedures subject to change without notice.
**Tray liners have 3/4" radius corners and do not include grounding hardware.
Made in the
United States of America
STATFREE T2™ DISSIPATIVE, RUBBER, 2-LAYER, 0.060" (1.5mm)
DESCO WEST:
3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.com
PHONE (909) 627-8178
DESCO EAST:
ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
MATERIAL
STATFREE T2™
DRAWING PM-104
DATE:
June
2017
© 2017 DESCO INDUSTRIES INC.
Employee Owned
FPGA/CPLD
京公网安备 11010802033920号
EEWORLD
