SPECIFICATION CONTROL DRAWING
Title
SCD
55/LF0314
Revision
Date
WIRE, RADIATION-CROSSLINKED, MODIFIED ETFE-INSULATED,
6-7-17
ULTRA LOW FLUORIDE, ULTRA LIGHTWEIGHT, OUTER SPACE, 600 VOLT
This specification sheet forms a part of the latest issue of Raychem Specification 55/.
C
CONDUCTOR - SILVER-COATED HIGH-STRENGTH
COPPER ALLOY
INSULATION - ULTRA LOW FLUORIDE,
RADIATION-CROSSLINKED,
MODIFIED ETFE
TABLE I. CONSTRUCTION DETAILS
WIRE
SIZE
(AWG)
30
28
26
24
22
20
CONDUCTOR
STRANDING
(number x AWG)
7 x 38
7 x 36
19 x 38
19 x 36
19 x 34
19 x 32
DIAMETER OF
STRANDED
CONDUCTOR
(inch)
MINIMUM
55/LF0314-30-*
55/LF0314-28-*
55/LF0314-26-*
55/LF0314-24-*
55/LF0314-22-*
55/LF0314-20-*
.0110
.0140
.0175
.0225
.0285
.0365
MAXIMUM
.0120
.0150
.0191
.0241
.0301
.0385
FINISHED WIRE
MAXIMUM
RESISTANCE
AT 20°C
(ohms/1000 ft.)
117.4
74.4
44.8
28.4
17.5
10.7
DIAMETER
(inch)
.0195 ± .0015
.0225 ± .0015
.0274 ± .0017
.0322 ± .0017
.0390 ± .0017
.0495 ± .0017
MAXIMUM
WEIGHT
(lbs/1000 ft.)
.52
.76
1.22
1.79
2.70
4.27
PART NUMBER
1/
TABLE II. PERFORMANCE DETAILS
CROSSLINKED VERIFICATION - BEND TESTING
PART NUMBER
1/
55/LF0314-30-*
55/LF0314-28-*
55/LF0314-26-*
55/LF0314-24-*
55/LF0314-22-*
55/LF0314-20-*
MANDREL DIAMETER
(inch) (± 3%)
.250
.250
.375
.375
.500
.500
WEIGHT
(lb) (± 3%)
.063
.063
.063
.125
.188
.250
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
TE Connectivity also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. OTHER CODES AND SUFFIXES MAY BE
ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
Raychem, TE Connectivity, and TE Connectivity (logo) are trademarks.
Raychem Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-522-6752
Fax: 1-650-361-6297
Page 1 of 2
DIMENSIONS ARE IN INCHES AND, UNLESS OTHERWISE DESIGNATED, ARE NOMINAL.
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2007-2017 TE Connectivity Ltd. family of companies. All Rights Reserved.
Page
Revision
SCD
SPECIFICATION CONTROL DRAWING
2 of 2
C
55/LF0314
WIRE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 200°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
COLOR: White preferred
CONCENTRICITY: 80% (minimum)
CROSSLINKED VERIFICATION: 300 ± 3°C for 1 hour
FLUORIDE EXTRACTION: 70 ± 2°C for 168 hours, 20 ppm (maximum)
IDENTIFICATION AND COLOR STRIPING DURABILITY:
125 cycles (250 strokes) (minimum), 500 g weight
INSULATION ELONGATION: 50% (minimum)
INSULATION FLAWS:
Spark Test, 1.5 kV (rms) (30-24 AWG)
3.0 kV (rms) (22-20 AWG)
Impulse Dielectric Test, 6.0 kV (peak)
INSULATION THICKNESS: .004 in. (nominal)
RADIATION RESISTANCE: 500 megarads
SHRINKAGE: 230 ± 3°C for 1 hour, 0.125 in. (maximum) in 12 inches
VACUUM STABILITY:
Total Mass Loss (TML), 1.00% (maximum)
Volatile Condensable Material (VCM): 0.10% (maximum)
VOLTAGE WITHSTAND (Post Environmental): 1500 volts (rms), 60 Hz, 5 minutes
1/ PART NUMBER:
The "*" in the part numbers in Tables I and II shall be replaced by a color code designator.
Example: AWG 22, white: 55/LF0314-22-9
AWG 22, white with a black stripe: 55/LF0314-22-90
1/ See footer section on page 1
京公网安备 11010802033920号
EEWORLD
