SPECIFICATION CONTROL DRAWING
TITLE
82/1822
Date
Revision
TWO CONDUCTOR CABLE, SHIELDED, JACKETED,
OUTER SPACE, FLEXIBLE, 600 VOLT
11-18-06
A
This specification sheet forms a part of the latest issue of Raychem Specification 80.
COMPONENT WIRE - 82/0812
SHIELD - SILVER-COATED COPPER
JACKET - RADIATION-CROSSLINKED,
MODIFIED FLEXIBLE ETFE
CABLE CONSTRUCTION DETAILS
PART NUMBER
1/
CONDUCTOR
SIZE
(AWG)
26
24
22
20
18
16
SHIELD
SIZE
(AWG)
38
38
38
38
38
38
JACKET THICKNESS
(inch)
MINIMUM
.005
.006
.006
.007
.007
.008
NOMINAL
.008
.009
.009
.010
.011
.012
OUTSIDE DIAMETER
(inch)
NOMINAL
.109
.123
.143
.165
.191
.225
MAXIMUM
.114
.129
.150
.173
.201
.236
MAXIMUM
WEIGHT
(lb/1000 ft)
82/1822-26-*
82/1822-24-*
82/1822-22-*
82/1822-20-*
82/1822-18-*
82/1822-16-*
9.3
12.1
15.8
20.6
28.4
39.2
CABLE RATINGS AND ADDITIONAL REQUIREMENTS
TEMPERATURE RATING: 150°C
Maximum continuous conductor temperature
VOLTAGE RATING: 600 volts (rms) at sea level
CROSSLINKING PROOF TEST: 300 ± 3°C for 1 hour,
DIELECTRIC WITHSTAND: 1500 volts (rms), 60 Hz
JACKET COLOR: White preferred
JACKET ELONGATION AND TENSILE STRENGTH:
Elongation, 100% (minimum)
Tensile Strength, 3000 lbf/in
2
(minimum)
JACKET FLAWS:
Spark Test, 1500 volts (rms)
Impulse Dielectric Test, 6.0 kV (peak)
RADIATION RESISTANCE (Test per Raychem Spec 55/):
500 megarads
SECANT MODULUS: 4.0 X 10
4
lbf/in
2
(maximum),
2 % strain, 2 in. jaw separation, 0.2 in. / minute,
SHIELD COVERAGE: 85% (minimum)
VACUUM STABILITY (Test per ASTM E 595):
Total Mass Loss (TML), 1.00% (maximum)
Volatile Condensable Material (VCM), 0.10% (maximum)
VOLTAGE WITHSTAND (Post Environmental):
1000 volts (rms), 60 Hz, 1 minute
PART NUMBER
The "*" in the part numbers above shall be replaced by
color code designators with a slash separating the
component wire colors and a dash separating the
component wire colors from the jacket color.
1/ Example: AWG 20, black and brown component wire;
white jacket: 82/1822-20-0/1-9
Users should evaluate the suitability of this product for their application. Specifications are subject to change without notice.
Tyco Electronics also reserves the right to make changes in materials or processing, which do not affect compliance with any specification, without notification to Buyer.
1/ COLORS AND COLOR CODE DESIGNATORS SHALL BE IN ACCORDANCE WITH MIL-STD-681. HOWEVER, DUE TO LENGTH LIMITATIONS OF THE RAYCHEM PART NUMBER,
AN ALTERNATIVE COLOR CODE MAY REPLACE MIL-STD-681 COLOR CODE DESIGNATORS. (EXAMPLE: “901/902...” MAY BE REPLACED BY “Axxx”.) OTHER CODES AND
SUFFIXES MAY BE ADDED TO THE PART NUMBER, AS NECESSARY, TO CAPTURE ANY ADDITIONAL REQUIREMENTS IMPOSED BY THE PURCHASE ORDER.
DIMENSIONS ARE IN INCHES, AND UNLESS OTHERWISE DESIGNATED ARE NOMINAL.
R
Wire & Cable
501 Oakside Avenue
Redwood City, CA 94063-3800
Phone: 1-800-227-8816
Fax: 1-650-361-6297
Page 1 of 1
THIS SPECIFICATION SHEET TAKES PRECEDENCE OVER DOCUMENTS REFERENCED HEREIN.
REFERENCED DOCUMENTS SHALL BE OF THE ISSUE IN EFFECT ON DATE OF INVITATION FOR BID.
© 2006 Tyco Electronics Corporation. All rights reserved.
京公网安备 11010802033920号
EEWORLD
