SONIX reserves the right to make change without further notice to any products herein to improve reliability, function or design. SONIX does not
assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent
rights nor the rights of others. SONIX products are not designed, intended, or authorized for us as components in systems intended, for surgical
implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SONIX product
could create a situation where personal injury or death may occur. Should Buyer purchase or use SONIX products for any such unintended or
unauthorized application. Buyer shall indemnify and hold SONIX and its officers, employees, subsidiaries, affiliates and distributors harmless against
all claims, cost, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use even if such claim alleges that SONIX was negligent regarding the design or manufacture of
the part.
SONiX TECHNOLOGY CO., LTD
Version 1.2
SN8P1602B
8-Bit Micro-Controller
AMENDENT HISTORY
Version
VER 1.0
VER 1.1
Date
Sep. 2003
Sep. 2003
Description
V1.0 First Issue
1. Remove approval sheet
2. Remove PCB layout notice section.
3. Modify the description of code option notice.
4. Add the description of PEDGE register.
5. Modify the description of INTRQ register.
6. Change operating voltage range from “2.2V ~ 5.5V” to “2.4V ~ 5.5V” at
Fosc=3.579545 MHz, ambient temperature = 25°C.
VER 1.2
Dec. 2003
1. Add “without pull-up resistor” in p1.4 pin description.
2. Correct the definition of P00G [1:0] (PEDGE register).
Change “01 = rising edge” to “01 = falling edge”.
Change “10 = falling edge” to “10 = rising edge”.
3. Add MASK/OTP relative table
SONiX TECHNOLOGY CO., LTD
Version 1.2
SN8P1602B
8-Bit Micro-Controller
Table of Content
AMENDENT HISTORY ............................................................................................................................... 2
GENERAL DESCRIPTION........................................................................................................................... 8
UPGRADE FROM SN8P1602/SN8P1603/SN8P1602A............................................................................... 8
FEATURES .................................................................................................................................................... 9
WORKING REGISTERS............................................................................................................................. 23
SONiX TECHNOLOGY CO., LTD
Page 3
Version 1.2
SN8P1602B
8-Bit Micro-Controller
Y, Z REGISTERS ...................................................................................................................................... 23
R REGISTERS........................................................................................................................................... 24
PROGRAM FLAG ....................................................................................................................................... 25
RESET/WAKEUP FLAG .......................................................................................................................... 25
CARRY FLAG ........................................................................................................................................... 25
ZERO FLAG ............................................................................................................................................. 25
GREEN MODE......................................................................................................................................... 44
POWER DOWN MODE ........................................................................................................................... 44
SYSTEM MODE CONTROL...................................................................................................................... 45
SYSTEM MODE SWITCHING ................................................................................................................. 46
WAKEUP TIME .......................................................................................................................................... 47
My current development board has a WIFI module that supports 802.11b/g. The OS is WINCE5.0, the development tool is VS2005, and the language is C/C++. I need to develop a communication program between...
I just checked online to see if it is possible to upgrade my computer for less than 1,000 yuan. I was thinking about whether I could replace the motherboard (of course, I might have to replace the CPU...
I got a Lierda LSD-FET430 UIF emulator, 14-pin double row. Now I want to connect only TEST, REST, and GND, but after connecting them this way, I don't know what the appropriate resistance should be be...
Energy-saving lamps, the continuation of the ten empirical laws of electronic ballasts . Hello everyone! Since the posting of the ten empirical laws of electronic energy-saving lamps, all parties have...
1 After opening a project, the make button in the left project window often does not perform any operation even if I have just modified the .c file. This sometimes requires me to right-click on the .c...
Hardware designers have begun to adopt FPGA technology in high-performance DSP designs because it can provide 10-100 times faster computing than PC-based or microcontroller-based solutions. Previou...[Details]
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
With the rapid development of science and technology, especially the widespread application of digital technology and various ultra-large-scale integrated circuits, electronic equipment, especially...[Details]
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
1 Introduction
Building Automation System (BAS) is a distributed monitoring system (DCS) designed according to distributed information and control theory. It is the result of the mutual de...[Details]
1 Introduction
With the development of control, computer, communication, network technology, etc., a new control technology, namely fieldbus, has emerged in the field of industrial control...[Details]
introduction
MAX6636 is a multi-channel precision temperature monitor that can not only monitor local temperature, but also connect up to 6 diodes externally. Each channel has a programmable...[Details]
1 Overview
In the field of traditional lighting, the concepts and definitions of lamps and lamps are clear. Lamps and lamps have their own applicable product standards, supporting technical st...[Details]
introduction
Belt drive is a common transmission device used in industrial production. Its commonly used speed detection device is a photoelectric encoder installed at the rotating end of th...[Details]
Today's automotive application developers face numerous design challenges as modern cars add more electronic functionality, while the need for lower power consumption and smaller printed circuit bo...[Details]
Synchronous buck designs are becoming increasingly difficult, and the selection of suitable ICs is becoming quite narrow. This Design Idea combines a current-mode PWM IC used in a flyback regulator...[Details]
1. Introduction
Stepper motor is a basic component that converts electrical energy into kinetic energy. It has been widely used in a variety of electromechanical equipment, such as various machine...[Details]
Automotive electronics are in a noisy environment
,
so automotive electronics must have excellent electromagnetic compatibility (EMC) performance. The most important part of automotive elec...[Details]
1 Theoretical Analysis
Ultrasonic waves
When propagating in a suspension, the ultrasonic waves that encounter the suspended particles are scattered and attenuated at the interface, an...[Details]
1. Introduction
With the continuous development of modern urban construction, infrastructure and real estate are becoming increasingly prosperous, and the quality requirements for construction ...[Details]
Embedded System
京公网安备 11010802033920号
EEWORLD
