HRSR/HRHF/HRNF
High Ratio Heat Shrinkable Tubing
Table 1: Dimensions
As Supplied
Inside Diameter*
Minimum (D)
0.600
(15)
1.250
(32)
1.750
(44)
2.000
(51)
2.500
(64)
3.000
(76)
4.000
(102)
Recovered
Inside Diameter
Maximum (d)
0.150
(4)
0.240
(6)
0.320
(8)
0.380
(10)
0.500
(13)
0.750
(19)
0.900
(23)
Wall Thickness
Nominal (W)
0.060
(1.5)
0.060
(1.5)
0.095
(2.4)
0.105
(2.7)
0.120
(3.0)
0.120
(3.0)
0.140
(3.6)
SIZE
-060
-125
-175
-200
-250
-300
-400
* When specification calls for coated tubing, reduce allowed minimum inside diameter by 0.10 inch
allow to for sealant thickness.
Properties:
HRSR
tubing is semi rigid and is fabricated from thermally stabilized, flame retarded,
cross linked modified polyolefin. The color shall be black, unless otherwise specified.
HRSR tubing meets the material requirements in RW 2013. Tests are performed on
uncoated tubing.
HRHF
tubing is highly flexible and is fabricated from thermally stabilized, flame retarded,
cross linked modified polyolefin. The color shall be black, unless otherwise specified.
HRHF tubing meets the material requirements in RW 2013. Tests are performed on
uncoated tubing.
HRNF
tubing is semi-rigid and is fabricated from thermally stabilized, cross linked
modified polyolefin. It is not flame retarded. The color shall be black, unless otherwise
specified. HRNF tubing meets the material requirements published in RW 2013. Tests
are performed on uncoated tubing.
© 2006, 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company.
All Rights Reserved.
TE Connectivity
300 Constitution Drive
Menlo Park, CA 94025 USA
TE Connectivity reserves the right to amend this drawing at any
time. Users should evaluate the suitability of the product for their
application
Cage Code:
Scale:
Size:
Document No :
Title:
Specification Control Drawing
High Ratio Heat-shrinkable
Tubing
HRSR/HRHF/HRNF
Rev. Date:
Rev.:
Sheet:
06090
Print Date: 18-Apr-11
None
A
15-Apr-11
D1
1 of 2
If this document is printed it becomes uncontrolled. Check for the latest revision.
Specification Control Drawing
ORDERING INFORMATION
HR HF – 125 FR - 10 / 97 / NM
“
NM”
No mark (See Note)
COATING
Adhesive = 97 standard with FR
Sealant = 226 standard with NF
LENGTH
in inches (10 standard)
“FR”
Flame retardant for SR & HF
SIZE
(See Table 1)
MATERIAL
HF - flex
SR - semi rigid
NF - non-flame
FAMILY
Note:
Standard marking is white for black tubing. Standard marking is black for non flame retardant clear tubing.
Expanded and recovered dimensions will be printed in inches and millimeters. HRHF-XXX FR, HRSR-XXX
FR, or HRNF-XXX FR will be printed on material
Rev. Date:
Rev.:
Document No.
Sheet:
15-Apr-11
D1
HRSR/HRHF/HRNF
2 of 2
© 2006, 2011 Tyco Electronics Corporation, a TE Connectivity Ltd. Company. All Rights Reserved
Print Date: 18-Apr-11
If this document is printed it becomes uncontrolled. Check for the latest revision.
LED Zone
京公网安备 11010802033920号
EEWORLD
