
NETT WARRIOR PLUG
| Parameter Name | Attribute value |
| Component type | electrical connector |
| Connector System | line to line |
| Sealable | yes |
| Connectors and terminals terminate to | Wires and cables |
| Housing size | 6 |
| shield | yes |
| Connector type | plug |
| Housing type | plug |
| pre-wired | no |
| Attachment color | black |
| Number of Positions | 6 |
| Number of power supply locations | 0 |
| Number of signal positions | 6 |
| Pre-installed | no |
| keying | Three keys |
| position keying | normal |
| Factory installed rear case | no |
| Penetration type | no |
| Entrance method | Back penetration |
| Shell plating material | black zinc nickel alloy |
| Shell material | Aluminum 6061-T6 |
| Insulation Materials | LCP (Liquid Crystal Polymer) |
| Sealed | no |
| Fluid type | none |
| O-ring material | Fluorosilicone rubber |
| Weight (g) | 2.62 |
| environmental protection | with |
| Limit stop collar | Without |
| Perimeter sealing material | Fluorosilicone elastomer |
| Environmental protection type | Elastomeric seal |
| Shielding level | 100 - 10000 MHz |
| Contact Current Rating (Max) (A) | 5 |
| reverse polarity | no |
| Terminal type | Pin |
| PCB installation and fixation | Without |
| Panel mount features | Without |
| PCB mounting alignment | Without |
| polar code | normal |
| Joint alignment type | keying |
| joint fixation | with |
| flange | with |
| Joint fixation type | Push-pull self-locking |
| joint alignment | with |
| Location monitoring | plugin clockwise |
| Component length | 25.2 mm [ .99 in ] |
| Cable size (AWG) | 22 – 24 |
| Acceptable wire insulation diameter range | 1.32 mm [ .03 – .054 in ] |
| Working group temperature range (°C) | -20 – 80 |
| fluid resistance | submersible |
| IP waterproof sealing rating | IP67 |
| IP dust seal rating | 5 |
| Circuit Application | Signal |
| Durability Level (Cycles) | 2000 |
| UL flammability rating | UL 94V-0 |
| Package quantity | 1 |
| On-site repair | no |
| Ignored load location | all |