KD3003-DC10A
Printheads
Thick Film Thermal Printhead (300dpi)
KD3003-DC10A
KD3003-DC10A is developing type of GL40 series which are developed mainly for label printers.
We have adopted low coefficient of abrasion and conductive protection coat to GL40 series which are possible for high
speed and good printing quality.
That is KD3003-DC10A which is 24V standard thick film thermal print head with high speed, high quality of printing, high
durability, long life, and strong resistance to abration.
Applications
High speed label printer
Food label printer
High speed ticket printer
High speed terminal printer
Features
1) Perform 150km life time adopting new protective coat.
(Perform three times life time by coefficient of abrasion which is about is about 1/10 of current mass-producing coat.)
2) Build in thermal high speeded heater and perform high printing 4 IPS. (100mm / s)
3) Available for thermal transfer printing by adopting specific partial glaze.
External dimensions
(Unit : mm)
TYPE OF PRINTHEAD
91
6.1±0.4
(5)
φ3H10
Length 4
(Effective Depth 3)
3-M3(Effective Depth 3)
20.656
±
0.2
40
±
0.3
20
±
0.3
DOT #960
(4.844)
81.312(Effetive Print Width)
DOT #960
DOT #1
25
±
0.5
Max.36
Max.45
Ma
x.
φ
20
(20.8)
(3)
15.3
±
0.3
Max.10
#2
#20
#6
#1
Max.5.5
60.5
±
0.3
20.5
±
0.3
φ3H10
(Effective Depth 3)
#1
#19
HIROSE HIF3FC-20PA-2.54DS
JST B6PS-VH
1/4
17.8
±
0.2
7.3
±
0.3
Appendix
Notes
No technical content pages of this document may be reproduced in any form or transmitted by any
means without prior permission of ROHM CO.,LTD.
The contents described herein are subject to change without notice. The specifications for the
product described in this document are for reference only. Upon actual use, therefore, please request
that specifications to be separately delivered.
Application circuit diagrams and circuit constants contained herein are shown as examples of standard
use and operation. Please pay careful attention to the peripheral conditions when designing circuits
and deciding upon circuit constants in the set.
Any data, including, but not limited to application circuit diagrams information, described herein
are intended only as illustrations of such devices and not as the specifications for such devices. ROHM
CO.,LTD. disclaims any warranty that any use of such devices shall be free from infringement of any
third party's intellectual property rights or other proprietary rights, and further, assumes no liability of
whatsoever nature in the event of any such infringement, or arising from or connected with or related
to the use of such devices.
Upon the sale of any such devices, other than for buyer's right to use such devices itself, resell or
otherwise dispose of the same, no express or implied right or license to practice or commercially
exploit any intellectual property rights or other proprietary rights owned or controlled by
ROHM CO., LTD. is granted to any such buyer.
Products listed in this document are no antiradiation design.
The products listed in this document are designed to be used with ordinary electronic equipment or devices
(such as audio visual equipment, office-automation equipment, communications devices, electrical
appliances and electronic toys).
Should you intend to use these products with equipment or devices which require an extremely high level of
reliability and the malfunction of with would directly endanger human life (such as medical instruments,
transportation equipment, aerospace machinery, nuclear-reactor controllers, fuel controllers and other
safety devices), please be sure to consult with our sales representative in advance.
About Export Control Order in Japan
Products described herein are the objects of controlled goods in Annex 1 (Item 16) of Export Trade Control
Order in Japan.
In case of export from Japan, please confirm if it applies to "objective" criteria or an "informed" (by MITI clause)
on the basis of "catch all controls for Non-Proliferation of Weapons of Mass Destruction.
Appendix1-Rev1.1
MCU
京公网安备 11010802033920号
EEWORLD
