NR7800FP-BC-AZ datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > NR7800FP-BC-AZ

Preview

NR7800FP-BC-AZ: DescriptionInGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS; File Size205KB，5 Pages; ManufacturerCEL; Websitehttp://www.cel.com/

Download Datasheet Compare View All

NR7800FP-BC-AZ Overview

InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS

Preview

Download Datasheet

View All

NEC's

φ80µ

InGaAs PIN-PD IN COAXIAL PACKAGE

NR7800 SERIES

FOR 155Mb/s AND 622 Mb/s APPLICATIONS

FEATURES

•

SMALL DARK CURRENT:

= 0.1 nA

•

HIGH SPEED RESPONSE:

fc = 2.5 GHz MIN.

• HIGH SENSITIVITY:

S = 0.89 A/W AT

= 1310 nm

S = 0.94 A/W AT

= 1550 nm

•

LOW OPERATING VOLTAGE:

= 5 V

• COAXIAL MODULE WITH SINGLE MODE FIBER (SMF)

or GI-50 fiber

• WITH SC CONNECTOR: Standard, FC connector: option

(Refer to Ordering Information)

DESCRIPTION

NEC's NR7800 Series are InGaAs PIN photo diode (PIN-PD)

coaxial modules with optical fiber pigtail. These modules are

designed for long wavelength optical communication systems

and are ideal as recievers for Synchronous Digital Hierarchy

(SDH) system, STM-4 and STM-1, ITU-T recommendations.

ELECTRO-OPTICAL CHARACTERISTICS

= 40° C to +85º C, unless otherwise specified)

PART NUMBER

SYMBOLS

PARAMETERS AND CONDITIONS

Dark Current, V

= 5 V, T

= 25º C

= 5 V

Terminal Capacitance, V

= 5 V, f = 1 MHz, T

= 25º C

Sensitivity, V

= 5 V,

= 1310 nm

= 5 V,

= 1550 nm

Temperature Dependence of Sensitivity,

= 5 V,

= 1550 nm

Polarization Dependence of Sensitivity,

= 5 V,

= 1550 nm, T

= 25º C

Wavelength Dependence of Sensitivity,

= 5 V,

= 1520 to 1560 nm, T

= 25º C

Cut-off Frequency, V

= 5 V, T

= 25º C

Optical Return Loss,

SMF

GI-50 Fiber

UNITS

A/W

GHz

0.78

0.80

-5

-2.5

2.5

MIN

NR7800 SERIES

TYP

0.1

1.0

0.89

0.94

2.5

MAX

1.0

1.5

∆

ORL

California Eastern Laboratories

4590 Patrick Henry Drive

Santa Clara, CA 95054-1817

Telephone: (408) 919-2500

Facsimile: (408) 988-0279

Subject: Compliance with EU Directives

CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant

with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous

Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive

2003/11/EC Restriction on Penta and Octa BDE.

CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates

that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are

exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.

All devices with these suffixes meet the requirements of the RoHS directive.

This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that

go into its products as of the date of disclosure of this information.

Restricted Substance

per RoHS

Lead (Pb)

Mercury

Cadmium

Hexavalent Chromium

PBB

PBDE

Concentration Limit per RoHS

(values are not yet fixed)

< 1000 PPM

< 100 PPM

< 1000 PPM

Concentration contained

in CEL devices

-A

Not Detected

-AZ

(*)

If you should have any additional questions regarding our devices and compliance to environmental

standards, please do not hesitate to contact your local representative.

Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance

content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information

provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better

integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate

information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL

suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for

release.

In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to

customer on an annual basis.

See CEL Terms and Conditions for additional clarification of warranties and liability.

3-181

NR7800FP-BC-AZ Related Products

	NR7800FP-BC-AZ	NR7800	NR7800FP-CC-AZ	NR7800FR-BB-AZ	NR7800FR-CB-AZ	NR7800CR-CB-AZ	NR7800CR-BB_AZ	NR7800CP-CC-AZ	NR7800CP-BC-AZ
Description	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS	InGaAs PIN-PD IN COAXIAL PACKAGE FOR 155Mb/s AND 622 Mb/s APPLICATIONS

Recommended Resources

Photoelectric control weather forecast circuit

Parallel switching power supply for televisions (d)

5V, 1A switching regulated power supply circuit

The three-phase electric motor is transformed into a single-phase motor with forward and reverse rotation.

Lam Soon AYE-203B multifunctional food processor circuit diagram

Combustible gas alarm 1

Could battery technology make traveling to Mars easier?: I recently watched the movie "The Martian". As an engineer working for a large engineering firm, I was able to relate to Mark Watney’s adventures across the desert surface of Mars (and perhaps other e...; maylove Analogue and Mixed Signal

Questions about f28027ADC sampling program: [b]In the example "F2802x ADC Start-Of-Conversion (SOC) Example Program.", if the length of the uint16_t Voltage1[50] array is greater than 50, an error will be reported when compiling. Why is this? P...; 1500231580 Microcontroller MCU

【Course Recommendation】+Key Points for Wireless Chip Performance Layout: [i=s]This post was last edited by wolf11111 on 2016-8-23 11:06[/i] This tutorial introduces the classification, application field, model, frequency band and other information of TI wireless products i...; wolf11111 Wireless Connectivity

How to interrupt and wake up the RTC when POWER DOWN occurs.: I am using 2440+wince5.0 and now want to use RTC to implement a timed wake-up system. Now I have the following questions: 1. In rtc.c, I can see OEMGetRealTime, OEMSetRealTime, OEMSetAlarmTime, but ho...; fsymd Embedded System

Useful software: [i=s] This post was last edited by paulhyde on 2014-9-15 09:37 [/i] Hehe, I will give you a very useful software to facilitate your device search [[i] This post was last edited by leeyf888 on 2009-8-2...; leeyf888 Electronics Design Contest

Translate this sentence!: How to translate latch data onto line latches? I encountered this sentence when I was reading IC timing, but I feel that my translation can never fully express the original meaning. Please help me, th...; kimheesun211 Embedded System

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components