5962-9461115HMC datasheet, PDF

Datasheet> All Categories > storage> storage> 5962-9461115HMC

5962-9461115HMC: DescriptionSRAM Module, 512KX32, 20ns, CMOS, CQFP68, CO-FIRED CERAMIC,QFP-68; Categorystorage storage; File Size288KB，40 Pages; ManufacturerWhite Microelectronics

Download Datasheet Parametric View All

5962-9461115HMC Overview

SRAM Module, 512KX32, 20ns, CMOS, CQFP68, CO-FIRED CERAMIC,QFP-68

5962-9461115HMC Parametric

Parameter Name	Attribute value
Maker	White Microelectronics
package instruction	CO-FIRED CERAMIC,QFP-68
Reach Compliance Code	unknown
Maximum access time	20 ns
JESD-30 code	S-CQFP-G68
JESD-609 code	e4
length	22.352 mm
memory density	16777216 bit
Memory IC Type	SRAM MODULE
memory width	32
Number of functions	1
Number of terminals	68
word count	524288 words
character code	512000
Operating mode	ASYNCHRONOUS
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
organize	512KX32
Package body material	CERAMIC, METAL-SEALED COFIRED
encapsulated code	QFP
Package shape	SQUARE
Package form	FLATPACK
Parallel/Serial	PARALLEL
Certification status	Not Qualified
Maximum seat height	5.08 mm
Maximum supply voltage (Vsup)	5.5 V
Minimum supply voltage (Vsup)	4.5 V
Nominal supply voltage (Vsup)	5 V
surface mount	YES
technology	CMOS
Temperature level	MILITARY
Terminal surface	GOLD
Terminal form	GULL WING
Terminal pitch	1.27 mm
Terminal location	QUAD
width	22.352 mm
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Figure 1; changed case outline M to be available in either a single or

dual cavity package. Added vendor CAGE code 0EU86 for device

types 05 through 10. -sld

Added device types 11 through 16.

Add note to paragraph 1.2.2 and table I, conditions. Add thermal

resistance, junction-to-case (θ

) for all case outlines. Add case

outline 9.

Table I, I

change maximum limits and I

change maximum limits.

Figure 1, case outline M, correct diagram adding "c" dimension, lead

thickness and change dimension A2 maximum from 0.020" to 0.025".

Figure 1, case outline 9, minimum dimension for D2/E2, change

0.990 inches to 0.980 inches and 25.15 mm to 24.89 mm.

Table I; Operating supply current (I

) changed the maximum limit for

device types 9 and 15 at f = 50 MHz from 700 mA to 725 mA and for

device types 10 and 16 at f = 58.8 MHz from 700 mA to 750 mA. -sld

Added device types 17 through 20. -sld

Added case outline A. -sld

Added case outline B. Added note to paragraph 1.2.4. -sld

Table I; Changed the I

from 8 mA to 6 mA for device types 07-10

and 13 -20 for the V

test. Editorial changes throughout. -sld

DATE (YR-MO-DA)

99-04-22

APPROVED

K. A. Cottongim

99-08-18

00-04-06

Raymond Monnin

00-06-19

Raymond Monnin

01-5-16

01-12-21

Raymond Monnin

02-11-18

03-02-24

03-12-19

04-05-03

Raymond Monnin

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Gary Zahn

CHECKED BY

Michael C. Jones

STANDARD

MICROCIRCUIT

DRAWING

THIS DRAWING IS

AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

AMSC N/A

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216

http://www.dscc.dla.mil

APPROVED BY

Kendall A. Cottongim

MICROCIRCUIT, HYBRID, MEMORY,

DIGITAL, 512K x 32-BIT, STATIC RANDOM

ACCESS MEMORY, CMOS

SIZE

SHEET

CAGE CODE

DRAWING APPROVAL DATE

95-11-13

REVISION LEVEL

67268

1 OF

5962-94611

5962-E251-04

DSCC FORM 2233

APR 97

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item performance requirements for device classes D, E, G, H, and K shall be in

accordance with MIL-PRF-38534. Compliance with MIL-PRF-38534 shall include the performance of all tests herein or as

designated in the device manufacturer's Quality Management (QM) plan or as designated for the applicable device class. The

manufacturer may eliminate, modify or optimize the tests and inspections herein, however the performance requirements as

defined in MIL-PRF-38534 shall be met for the applicable device class. In addition, the modification in the QM plan shall not

affect the form, fit, or function of the device for the applicable device class.

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38534 and herein.

3.2.1 Case outline(s). The case outline(s) shall be in accordance with 1.2.4 herein and figure 1.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.

3.2.3 Truth table(s). The truth table(s) shall be as specified on figure 3.

3.2.4 Timing diagram(s). The timing diagram(s) shall be as specified on figures 4 and 5.

3.2.5 Block diagram. The block diagram shall be as specified on figure 6.

3.2.6 Output load circuit. The output load circuit shall be as specified on figure 7.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full specified operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are described in table I.

3.5 Marking of device(s). Marking of device(s) shall be in accordance with MIL-PRF-38534. The device shall be marked

with the PIN listed in 1.2 herein. In addition, the manufacturer's vendor similar PIN may also be marked.

3.6 Data. In addition to the general performance requirements of MIL-PRF-38534, the manufacturer of the device described

herein shall maintain the electrical test data (variables format) from the initial quality conformance inspection group A lot

sample, for each device type listed herein. Also, the data should include a summary of all parameters manually tested, and for

those which, if any, are guaranteed. This data shall be maintained under document revision level control by the manufacturer

and be made available to the preparing activity (DSCC-VA) upon request.

3.7 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to supply to this

drawing. The certificate of compliance (original copy) submitted to DSCC-VA shall affirm that the manufacturer's product meets

the performance requirements of MIL-PRF-38534 and herein.

3.8 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38534 shall be provided with each lot of

microcircuits delivered to this drawing.

STANDARD

MICROCIRCUIT DRAWING

DEFENSE SUPPLY CENTER COLUMBUS

COLUMBUS, OHIO 43216-5000

SIZE

REVISION LEVEL

5962-94611

SHEET

DSCC FORM 2234

APR 97

Recommended Resources

How to design a forward switching power supply?

Insulation withstand voltage detector circuit

megaphone circuit

Sensor circuit diagram

Decorative lantern control circuit

Infrared remote control circuit (TR1300/1315, PIC12043)

Flip switch based on LIS2DW12 of PSOC6;: [i=s]This post was last edited by DavidZH on 2019-10-7 18:58[/i]Principle analysis: By reading the values of the XYZ axis at different positions of LIS2DW12, and then making judgments, for example, af...; DavidZH MEMS sensors

How difficult is it to crack STM32?: Recently, a customer asked us to develop an instrument. We wanted to use STM32F103. The customer suspected the chip decryption problem. He said he asked the company in Shenzhen, and they told him that...; yunanxiang stm32/stm8

Recruiting engineers and interns: Company Profile: Suzhou Jishi Electronic Technology Co., Ltd. is located in Changshu, Suzhou, a city with a long history. It is a high-tech company specializing in the research and development and pro...; 机器视觉GFocus Integrated technical exchanges

Wireless data transmission module information: Detailed specifications: 1 Reliable line-of-sight transmission distance up to 800m; GFSK modulation is adopted; 2 Carrier frequency 433 MHz, ISM band, no frequency application is required; 3 Provide 8...; jek9528 Industrial Control Electronics

Discussion on the stability of single chip microcomputer system in the field of measurement and control: In recent years, the application of single-chip microcomputer systems in the field of industrial measurement and control has become more and more extensive. However, for industrial sites with harsh en...; rain MCU

How to setup SPI1 and write interrupt handler, preferably without using a library: Can anyone provide me with an SPI 1 program in interrupt master mode for reference? It's best not to use the library. I've been working on it for a few days, but I can only interrupt once after settin...; q91391 stm32/stm8

Shortcut: A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 AA AB AC AD AE AF AG AH AI AJ AK AL AM AN AO AP AQ AR AS AT AU AV AW AX AY AZ B0 B1 B2 B3 B4 B5 B6 B7 B8 B9 BA BB BC BD BE BF BG BH BI BJ BK BL BM BN BO BP BQ BR BS BT BU BV BW BX BY BZ C0 C1 C2 C3 C4 C5 C6 C7 C8 C9 CA CB CC CD CE CF CG CH CI CJ CK CL CM CN CO CP CQ CR CS CT CU CV CW CX CY CZ D0 D1 D2 D3 D4 D5 D6 D7 D8 D9 DA DB DC DD DE DF DG DH DI DJ DK DL DM DN DO DP DQ DR DS DT DU DV DW DX DZ

Popular Components