7P004FLA2902I15 datasheet, PDF

Datasheet> All Categories > storage> storage> 7P004FLA2902I15

7P004FLA2902I15: DescriptionFlash Card, 2MX16, 150ns, CARD-68; Categorystorage storage; File Size140KB，15 Pages; ManufacturerMicrosemi; Websitehttps://www.microsemi.com

Download Datasheet Parametric View All

7P004FLA2902I15 Overview

Flash Card, 2MX16, 150ns, CARD-68

7P004FLA2902I15 Parametric

Parameter Name	Attribute value
Is it lead-free?	Contains lead
Is it Rohs certified?	incompatible
Maker	Microsemi
Parts packaging code	CARD
package instruction	,
Contacts	68
Reach Compliance Code	compliant
ECCN code	3A991.B.1.A
Maximum access time	150 ns
Spare memory width	8
JESD-30 code	X-XXMA-X68
memory density	33554432 bit
Memory IC Type	FLASH CARD
memory width	16
Number of functions	1
Number of terminals	68
word count	2097152 words
character code	2000000
Operating mode	ASYNCHRONOUS
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
organize	2MX16
Package body material	UNSPECIFIED
Package shape	UNSPECIFIED
Package form	MICROELECTRONIC ASSEMBLY
Parallel/Serial	PARALLEL
Peak Reflow Temperature (Celsius)	NOT SPECIFIED
Programming voltage	12 V
Certification status	Not Qualified
Maximum supply voltage (Vsup)	5.25 V
Minimum supply voltage (Vsup)	4.75 V
Nominal supply voltage (Vsup)	5 V
surface mount	NO
technology	CMOS
Temperature level	INDUSTRIAL
Terminal form	UNSPECIFIED
Terminal location	UNSPECIFIED
Maximum time at peak reflow temperature	NOT SPECIFIED
Base Number Matches	1

Preview

Download Datasheet

View All

PCMCIA Flash Memory Card

FLA Series

PCMCIA Flash Memory Card

General Description

WEDC’s FLA Series Flash memory cards offer high density

linear Flash solid state storage solutions for code and data

storage, high performance disk emulation and execute in place

(XIP) applications in mobile PC and dedicated (embedded)

equipment.

FLA series cards conform to PCMCIA international standard.

The card’s control logic provides the system interface and

controls the internal Flash memories. Card can be

read/written in byte-wide or word-wide mode which allows

for flexible integration into various systems. Combined with

file management software, such as Flash Translation Layer

(FTL), FLA Flash cards provide removable high-performance

disk emulation.

The FLA series offers low power modes controlled by

registers. Standard cards contain separate 2kB EEPROM

memory for Card Information Structure (CIS) which can be

used for easy identification of card characteristics.

The WEDC FLA series is based on Intel/Sharp Flash

memories.

Note:

Standard options include attribute memory. Cards without

attribute memory are available. Cards are also available with or

without a hardware write protect switch.

1 MEGABYTE through 40 MEGABYTE (Intel/Sharp based)

Features

•

Low cost High Density Linear Flash Card

• Supports 5V only systems or 5V systems with

12V VPP

• Based on Intel/Sharp FlashFile Components

• Fast Read Performance

- 150ns or 200ns Maximum Access Time

• x8 / x16 Data Interface

• High Performance Random Writes

- 8µs Typical Word Write Time

• Automated Write and Erase Algorithms

- Command User Interface

• 100,000 Erase Cycles per Block

• 64K word symmetrical Block Architecture

• PC Card Standard Type I Form Factor

Architecture Overview

WEDC’s FLA series is designed to support from 2 to 20, 4Mb, 8Mb or 16Mb components, providing a wide range

of density options. Cards are based on the 28F008SA (8Mb) for 12V VPP applications or on the 28F004S5 (4Mb),

28F008S5 (8Mb) and 28F016S5 (16Mb) devices for 5V only applications. Devices codes for the 28F004S5,

28F008SA, 28F008S5 and the 28F016S5 are: A7H, A2H, A6H and AAh respectively. Systems should be able to

recognize all four codes. Cards utilizing the 8Mb components provide densities ranging from 2MB to 20MB in 2MB

increments, cards utilizing 16Mb components provide densities ranging from 4MB to 40MB in 4MB increments. 4

Mbit memory devices are used only for smallest capacity cards (1MB).

In support of the PC Card 95 standard for word wide access devices are paired. Therefore, the Flash array is

structured in 64K word (128kBytes) blocks. Write, read and block erase operations can be performed as either a

word or byte wide operation . By multiplexing A0, CE1# and CE2#, 8-bit hosts can access all data on data lines

DQ0 - DQ7.

The FLA21-FLA36 series also supports the following PCMCIA compatible register functions: Soft Reset via the

Configuration Option Register, Power Down (sleep mode) via the Configuration and Status Register and

monitoring of Ready/Busy, Soft Reset and Power Down via the Card Status Register (cards without attribute

memory and versions FLA51 - FLA66 do not have registers).

The FLA series cards conform with the PC Card Standard (PCMCIA) and JEIDA, providing electrical and physical

compatibility. The PC Card form factor offers an industry standard pinout and mechanical outline, allowing density

upgrades without system design changes.

WEDC’s standard cards are shipped with WEDC’s Logo. Cards are also available with blank housings (no Logo).

The blank housings are available in both a recessed (for label) and flat housing. Please contact WEDC sales

representative for further information on Custom artwork.

August 2000 Rev. 4 - ECO #13125

PC Card Products

Recommended Resources

Temperature detection control circuit of electric kettle

CE7120 semi-automatic profiling lathe electrical schematic circuit 04

Voltage reversal and double voltage circuit diagram

Sixteen-way wireless remote control

DC motor starting circuit controlled by time relay

A brief discussion on Program framework: A brief discussion on the architecture of microcontroller applications. For microcontroller programs, everyone is familiar with them, but there are not many people who actually use or consider the arc...; yaoyuanytu 51mcu

Where is the shortcut key setting? I can't flip the components with the spacebar. Is there anyone who knows how to do it? Please help.: Where are the shortcut keys? I can't use the spacebar to flip the components in the schematic. Is there anyone who knows how to do this? Please help me. Thank you!...; NANBEI01 FPGA/CPLD

【KW41Z】MKW41Z4.h related issues: After installing KW41Z_ConnSw_1.0.2, I found two different versions of MKW41Z4.h. The 915KB version is: Reference manual: MKW41Z512RM Rev. 0.1, 04/2016 Version: rev. 1.0, 2015-09-23 Build: b160720 The...; zfbnx NXP MCU

【Learning experience】---Battery power monitoring basics: These days, I saw a battery detection video in the learning video. I thought TI would vigorously promote its impedance tracking technology. However, when I clicked on the video and started from the fi...; hanskying666 Analogue and Mixed Signal

There is something wrong with this program.: #include reg52.h#define uchar unsigned char#define uint unsigned intsbit dula=P2^6;sbit wela=P2^7;uchar a,num,t,shi,fen,M1,M2;uchar code table[]={0x3f,0x06,0x5b,0x4f,0x66,0x6d,0x7d,0x07,0x7f,0x6f,0x77...; wt418995874 51mcu

Help: warning: last line of file ends without a newline: I am using ccs2.0, and the file is 6713.I need help from experts. When I compile ccs, I get warning: last line of file ends without a newline every time. Some people say that I need to add a carriage ...; qewgqerr Analogue and Mixed Signal

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components