800-034-DDHL6C8-13PN-72

Because the STM32 HAL library only has millisecond-level delay for HAl_Delay(), in order to achieve accurate microsecond-level delay, Systick has to be modified. However, since it is used internally ...[Details]

1. Test environment description Hardware platform: NUCLEO-F767ZI development board (STM32F7, Cortex-M7, 216MHz, 2MB Flash, 512KB SRAM)  Operating system: FreeRTOS v9.0.0 (CMSIS-RTOS v1.02)  TCP/IP p...[Details]

From last year to now, competition in the photovoltaic inverter industry has become increasingly fierce. In addition to the introduction of new products, various marketing and promotion methods hav...[Details]

The day before yesterday, another mainland technology company submitted a prospectus to the Hong Kong Stock Exchange. The company is called "Jia Nan Creative (hereinafter referred to as 'Jia Nan')"...[Details]

One addend is in the on-chip RAM 40H, 41H, 42H units, the other addend is in the on-chip RAM 43H, 44H, 45H, and the sum is stored in the 50H, 51H, 52H units, with the carry bit stored in 00H. Please ...[Details]

1.GCC+PN(WinAVR-20071221) Introduction: WinAVR-20071221 comes with Programmer's Notepad, which is an easy-to-use and powerful code editor with basic functions such as project management, syntax colo...[Details]

MSP 430 MCU key program #include msp430x14x.h   #include "key.h"  void Init_Port(void)  {      //Set all pins of P1 port to input mode during initialization      P1DIR = 0;        //Set all pins of ...[Details]

The EM78  microcontroller  does not have a multiplication instruction, so the multiplication operation needs to be converted into an addition operation. The 0X20 unit data is multiplied by the 0X21 u...[Details]

This is a very small electronic product, but it is very powerful. It can be easily embedded and installed on the instrument panel. It is suitable for enthusiasts to make or modify old instruments. 　　...[Details]

//Digital tube data P0 port, digital tube control P2 port #include avr/io.h #include avr/delay.h #include avr/pgmsPACe.h #include avr/signal.h #include avr/interrupt.h #define code PROGMEM #define u...[Details]

STM8S has a powerful clock system, which provides a high-speed 16M RC oscillator and a low-speed 128K RC oscillator. The clock controller is powerful, flexible and easy to use. Its purpose is to enab...[Details]

//There are 48 interrupt vectors in the Cortex-M0 core. //Since the M0 core does not have the interrupt vector table relocation function of the M3 and M4 cores, the following methods must be used to ...[Details]

Consumer electronics products on the market have gradually adopted touch-sensing buttons to replace traditional mechanical buttons. In response to this trend, EDOM Technology has designed a ...[Details]

This article mainly explains the mechanism of STM32 low power mode, and does not focus on the program implementation of STM32 low power consumption. In addition, it becomes very simple to implemen...[Details]

From the above figure, we can see that there is a difference between the ideal waveform and the actual waveform. The actual waveform has jitter at the moment of pressing and releasing. The length of...[Details]