Pl tronics, Inc.
.
19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA
Manufacturer of High Quality Frequency Control Products
P1145-3S, P1145-HC CMOS Series
P1145-3S: CMOS with Enable/ Disable, P1145-HC without E/D
Full Size (14 Pin DIP) Thru-Hole Metal Clock Oscillator
650 kHz
–
69.999 MHz
Standard Specifications
Overall Frequency Stability
Operating Temperature Range
Supply Voltage (Vcc)
Symmetry (Duty Cycle)
Logic Levels
Output Load
-3S: Enable/Disable Option (E/D)
Frequency Range
(MHz)
Packaging
Tubes
SC
Mechanical: inches (mm)
0.500 (12.7) MAX
0.807 (20.5) MAX
PLETRONICS
DI
Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned.
Frequency Stability is inclusive of frequency shifts due to calibration, temperature, supply voltage, shock, vibration and load
Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code.
0 .200 (5.08)
MAX
0.031 (0.8)
0.300 (7.62)
0.600 (15.24)
OUT
8
14
Vcc
ON
TI
0.650 –
10.001 –
26.000 –
35.000 –
50.001 –
10.000
25.999
34.999
50.000
69.999
7
10
15
20
25
10
20
25
30
35
3.0
2.5
2.5
2.5
2.5
4.0
3.5
3.5
3.5
3.5
Part Numbering Guide
E
P11 45 - 3S
Max. Supply Current
Icc (mA) w/ 15pF load
3.3V
5.0V
V - 60.0M - XXX
(Internal Code or blank)
Series
Frequency Stability
45 = ± 50 PPM
44 = ± 25 PPM
20 = ± 20 PPM
Model
-3S with E/D
-HC no E/D
Special Specifications (choose all that apply)
Blank: Std Specs ( 0 to +70
°
C, 40/60% Symmetry)
E: Extended Operating Temperature Range (- 40 to +85
°
C)
S: 45/55% Symmetry at 50% of Vcc
not to scale
0.250 (6.35) MAX
NU
Rise and Fall Time
Tr & Tf (nS) w/ 15pF load
Typical
Maximum
± 50 PPM, ± 25 PPM, ± 20 PPM over Operating Temperature Range
0 to +70° C is standard, but can be extended to - 40 to +85
°C
for certain frequencies
5.0 volts and 3.3 volts available
40/60 to 60/40% is standard, but 45/55% at 50% of Vcc is also available (see Waveform 1)
Logic “1”
90% of Vcc MIN;
Logic “0”
10% of Vcc MAX
Standard load is 15pF (typ. 1 ASIC) maximum, see Test Circuit 3 or 1 (consult factory for
heavier
loads)
Output enabled when Pin #1 is open or at Logic “1”; Output disabled when Pin #1 is at Logic “0”.
Frequency in MHz
Supply Voltage (Vcc)
Blank: 5.0V
± 10%
V: 3.3 volts
± 10%
0.020
(.51)
Pl tronics, Inc.
(425) 776 -1880, Fax: (425) 776-2760, ple-sales@pletronics.com, www.pletronics.com
ED
7
GND
1
-3S Pin 1 = E/D
-HC Pin 1 = N.C.
Nov 2006
16
Domestic Chip Exchange
京公网安备 11010802033920号
EEWORLD
