53124
POWER MOSFET OPTOCOUPLER
RADIATION TOLERANT, ± 90V - 0.8A
Mii
MICROCIRCUITS DIVISION
Features:
Applications:
•
•
•
•
•
•
•
•
•
•
•
•
•
Design Tested to 100 krad (Si) Total Dose
Hermetically Sealed in 8-Pin Dual-In-Line
Package
Performance over –55°C to +125°C
Compact Solid State Bi-directional Switch
AC/DC Power Switching
Maximum Average Current
AC/DC: 0.8 A
(1)
DC only: 1.6 A
(1)
Per Derating Curves (Figure 3)
AC/DC: 0.5 A
DC only: 1.0 A
Optically Coupled
Input/Output Isolation Tested to 1500 VDC
High Level of Transient Immunity
3 A Output Surge Current
Shock and Vibration Resistant
MIL-PRF-38534
Same foot print as HSSR7111 / Mii 53111 &
Electrically Similar
•
•
•
•
•
•
•
•
Satellite/Space systems
Military/High Reliability Systems
Standard 28 VDC and 48 VDC Load Driver
Standard 24 VAC Load Driver
Aircraft Controls
AC/DC Electromechanical and Solid State
Relay Replacement
I/O Modules
Switching Heaters
DESCRIPTION
The 53124 is a single channel power MOSFET optocoupler which is suitable as a pin for pin replacement for the Mii
53111 when radiation tolerant performance and similar electrical performance to the 53111 is required. The primary
difference between the 53124 and 53111 is that the radiation tolerant power MOSFETs employed in the 53124
exhibit a higher R
DS(ON).
The higher values of R
DS(ON)
results in a lower current for the same power dissipation or
higher power dissipation for the same current levels relative to the 53111.
The popular eight pin, hermetic dual-in-line ceramic package combined with 1500 VDC isolation between input and
output, makes this optocoupler ideal for solid-state relay applications. Performance is specified over the full military
temperature range. This device is available as COTS, or as fully compliant MIL-PRF-38534 Class H or with custom
screening. Lead options support both through-hole and surface-mount assembly. Gold plated leads are standard, but
other lead finishes per MIL-PRF-38534 are also available.
Functionally, the device operates as a single-pole, normally open (1 Form A) solid-state relay. The device is
actuated by an input current, which can be supplied from standard logic types such as open-collector TTL. The
input current biases a light emitting diode that is optically coupled to an integrated photovoltaic diode array. The
photovoltaic array powers control circuitry that operates the output MOSFETs. Optimum switching of either AC or
DC loads is provided by a configurable output. For AC loads, Connection A in Figure 1 must be used. Connection
A will also switch DC loads but Connection B, in Figure 1, provides DC-only operation with the advantages of
substantial reduction in on-resistance and twice the output current capability as that obtained with Connection A.
Micropac Industries
cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac
reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION
•
905 E. Walnut St., Garland, TX 75040
•
(972) 272-3571
•
Fax (972) 494-2281
www.micropac.com
E-MAIL:
microsales@micropac.com
5/12/05
Pg.
1
of 14
53124
ABSOLUTE MAXIMUM RATINGS:
Radiation Tolerant Power MOSFET Optocoupler
Storage Temperature Range ..……………………………………………………….........……............... -65°C to +150°C
Operating Ambient Temperature - T
A
...................…………………………………………..….…..….. -55°C to +125°C
Junction Temperature - T
J
..............................……………………………………………...…….......….........…. +150°C
Operating Case Temperature - T
c
.....................………………………………………...……….……............ +145°C
(2)
Lead Solder Temperature for 10 seconds .......................………………………………………....…….............. +260°C
(1.6 mm below seating plane)
Average Input Current - I
F
....................…...……………………………………………..……..........…............... 20 mA
Peak Repetitive Input Current - I
Fpk
.............…………………………………...…………………........…............. 40 mA
(Pulse width < 100 ms; duty cycle < 50%)
Peak Surge Input Current - I
Fpk
surge .............……………………………………………………….................. 100 mA
(Pulse width < 0.2 ms; duty cycle < 0.1%)
Reverse Input Voltage - V
R
................................…………………………..……………………………..................... 5 V
Average Output Current
Connection A - I
O
........................…………………………..…………………..……….................................... 0.8 A
(1)
Connection B - I
O
..............................................………..………………………..……………………............ 1.6 A
(1)
Average Output Current, derated per Figure 3
Connection A - I
O
.......................................…………………………………………..……………..................... 0.5 A
Connection B - I
O
........................................……………………………………………………..….................... 1.0 A
Single Shot Output Current - Figure 4
Connection A - I
Opk
surge (Pulse width < 10 ms) ........………………………………………..…...…………...... 3 A
Connection B - I
Opk
surge (Pulse width < 10 ms) .........………………………………………..………………..... 6 A
Output Voltage
Connection A - V
O
.........................……………………………………………………..……..…......... –90 V to +90 V
Connection B - V
O
............................…...……………………………………………………….............. 0 V to +90 V
Average Output Power Dissipation - Figure 5 ........………………………………………….…………….... 800 mW
(3)
RECOMMENDED OPERATING CONDITIONS:
Parameter
Input Current (ON)
Input Voltage (OFF)
Operating
Temperature
Symbol
I
F (ON)
V
F (OFF)
T
A
Min.
5
0
-55
Max.
20
0.6
+125
Units
mA
VDC
°C
Micropac Industries
cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac
reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION
•
905 E. Walnut St., Garland, TX 75040
•
(972) 272-3571
•
Fax (972) 494-2281
www.micropac.com
E-MAIL:
microsales@micropac.com
5/12/05
Pg.
2
of 14
53124
ELECTRICAL SPECIFICATIONS (Pre-Irradiation)
T
A
= -55°C to +125°C, unless otherwise specified.
Parameter
Symbol
Min.
Radiation Tolerant Power MOSFET Optocoupler
Typ.*
Max.
Unit
s
V
Test Conditions
V
F
= 0.6 V
I
O
= 10
µA
I
F
= 10 mA
I
O
= 500 mA
(pulse duration
≤
30 ms)
I
F
= 10 mA
I
O
= 1 A
(pulse duration
≤
30 ms)
V
F
= 0.6 V
V
O
= 90 V
I
F
= 10 mA
I
F
= 10
µA
RH
≤
45%, t = 5 s
V
I-O
= 1500 VDC
T
A
= 25°C
I
F
= 10 mA
V
DD
= 28 V
I
O
= 800 mA
I
F
= 10 mA
V
DD
= 28 V
I
O
= 800 mA
V
PEAK
= 50 V
C
M
= 1000 pF
C
L
= 15 pF
R
M
≥
1 MΩ
V
DD
= 5 V
V
I-O (PEAK)
= 50 V
R
L
= 20 kΩ
C
L
= 15 pF
Notes
Output Withstand Voltage
Output On-Resistance
(Connection A)
V
O(OFF)
90
110
0.8
2.5
Ω
R
(ON)
Output On-Resistance
(Connection B)
Output Leakage Current
Input Forward Voltage
Input Reverse Breakdown
Voltage
Input-Output Insulation
I
O (OFF)
V
F
V
R
I
I-O
1.0
5
1
0.2
0.7
Ω
4,
Figure
1
10
-4
1.7
10
2.1
µA
V
V
µA
5, 6
Turn-On Time
t
ON
1.25
6
ms
Figure
6
Figure
6
Turn-Off time
t
OFF
0.25
ms
Output Transient Rejection
dV
O
dt
1000
V/µs
Figure
7
Input-Output Transient
Rejection
dV
I-O
dt
500
V/µs
Figure
8
* All typical values are at T
A
= 25°C, I
F (ON)
= 10 mA, V
F (OFF)
= 0.6 V unless otherwise specified.
Micropac Industries
cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac
reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION
•
905 E. Walnut St., Garland, TX 75040
•
(972) 272-3571
•
Fax (972) 494-2281
www.micropac.com
E-MAIL:
microsales@micropac.com
5/12/05
Pg.
3
of 14
53124
Radiation Tolerant Power MOSFET Optocoupler
TYPICAL CHARACTERISTICS - (Pre-Irradiation)
All typical values are at T
A
= 25°C, I
F (ON)
= 10 mA, V
F (OFF)
= 0.6 V unless otherwise specified.
Parameter
Output Off-Capacitance
Output Offset Voltage
Input Diode Temperature Coefficient
Input Capacitance
Input-Output Capacitance
Input-Output Resistance
Symbol
C
O (OFF)
V
OS
∆V
F
/∆T
A
C
IN
C
I-O
R
I-O
Test Conditions
V
O
= 28 V
f = 1 MHz
I
F
= 10 mA
I
O
= 0 mA
I
F
= 10 mA
V
F
= 0 V
f = 1 MHz
V
I-O
= 0 V
f = 1 MHz
V
I-O
= 500 V
t = 60 s
Typical Value
145
2
-1.4
20
1.5
10
13
Units
pF
µV
mV/°C
pF
pF
Ω
8
5
5
7
Notes
Notes:
1. Maximum average current rating where the case temperature (T
C
) is maintained below 120°C.
2. Maximum junction to case thermal resistance for the output device is 3°C/W, where case temperature (T
C
) is
measured at the center of the package bottom.
3. For rating, see Figure 5. The output power P
D
rating curve is obtained when the part is handling the maximum
average output current I
O
as shown in Figure 3.
4. During the pulsed R
ON
measurement (I
O
duration < 30 ms), ambient (T
A
) and case temperature (T
C
) are equal.
5. Pins 2 through 3 shorted together and pins 5 through 8 shorted together.
6. This is a momentary withstand test, not an operating condition.
7. V
OS
is a function of I
F
and is defined between pins 5 and 8, with pin 5 as the reference. V
OS
must be measured
in a stable ambient (free of temperature gradients).
8. Zero-bias capacitance measured between the LED anode and cathode.
CAUTION:
Care should be taken not to exceed the maximum output power dissipation, maximum case temperature, and
maximum junction temperature when repetitively switching loads.
Micropac Industries
cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac
reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION
•
905 E. Walnut St., Garland, TX 75040
•
(972) 272-3571
•
Fax (972) 494-2281
www.micropac.com
E-MAIL:
microsales@micropac.com
5/12/05
Pg.
4
of 14
53124
Radiation Tolerant Power MOSFET Optocoupler
Case Outlines
Terminal number
P, X and Y
Terminal symbol
Connection A
(AC or DC load)
Connection B
(DC load only)
NC
V
F
+
V
F-
NC
V
O+
NC
N
O-
N
O+
1
2
3
4
5
6
7
8
NC = No Connection
NC
V
F
+
V
F-
NC
V
O-
NC
NC
V
O+
CONNECTION A
AC/DC CONNECTION
IO
IF
+
VF
-
1
8
CONNECTION B
DC CONNECTION
IO
IF
+
VF
-
1
8
+
+
VO
-
2
7
2
7
VO
3
6
3
6
4
5
-
4
5
Figure 1 - Terminal Connections
INPUT
OFF
ON
OUTPUT
OFF
ON
Figure 2 - Truth Table
Micropac Industries
cannot assume any responsibility for any circuits shown or represent that they are free from patent infringement.
Micropac
reserves the right to make changes at any time in order to improve design and to supply the best product possible.
MICROPAC INDUSTRIES, INC. MICROCIRCUITS DIVISION
•
905 E. Walnut St., Garland, TX 75040
•
(972) 272-3571
•
Fax (972) 494-2281
www.micropac.com
E-MAIL:
microsales@micropac.com
5/12/05
Pg.
5
of 14
京公网安备 11010802033920号
EEWORLD
