Description
Desco’s ESD inspection gloves are designed to be worn when
handling ESD susceptible items. They are made with dissipative
(1 x 10
5
to < 1 x 10
8
ohms) Thunderon
®
Fibers to reduce charge
generation and bond to a grounded operator. Additional silicone free carrier
yarn is made with Kevlar Kleen
®
which helps to protect operator’s hands from
cuts on circuit board edges, leads, and other sharp objects. The carrier yarn will
also absorb sweat and oils produced by the operator’s hands to help prevent
contamination. The seamless fine gauge knit is designed for all-day wear
allowing easy hand movement and a high level of tactile sensitivity. Desco’s ESD
inspection gloves may be laundered and will retain their ESD properties for 30
washings or approximately 1 year.
Features
•
Dissipative (1 x 10
5
to < 1 x 10
8
ohms) Thunderon
®
Fibers
• Protective Carrier Yarn
• Resistance
1 x 10
5
to < 1 x 10
8
ohms tester per ANSI/ESD 5P15.1 Standard
Practice for In-Use Resistance Testing of Gloves and Finger Cots
A properly grounded operator can touch a charged
ESD sensitive device and a damaging ESD event
can occur (Charged Device Model). Increasing the
electrical path’s contact resistance is one way to
control the speed of the discharge and reduce the
possibilities of damage. A good way to accomplish
this is by wearing static dissipative gloves.
Per JESD625-A (Revision of EIA-625) paragraph 11.5
Gloves / Finger Cots
“When gloves or finger cots are required, only cotton
gloves, antistatic/conductive gloves, or antistatic/
conductive finger cots should be used when handling
ESDS [ESD sensitive] devices.”
Item
68120
68121
68122
68123
Size
Small
Medium
Large
X-Large
Sold in Pairs
Length*
7-3/8"
7-1/2"
7-3/4"
8"
*Length is measured from the tip of
the fingers to the bottom of the glove
Inspection Gloves In Use
Note: The user must determine the suitability for use of an ESD glove for his particular
application. The ESD Association recommends that personnel grounding items should
not be used in situations where inadvertent exposure to line voltage is possible. The
user should check with local safety personnel to determine requirements for their
particular area.
Operators to be grounded via a wrist strap or ESD flooring-footwear system can test
their personnel grounding device while the glove is worn using a regular wrist strap /
footwear tester.
Glove Laundering
For proper operation, the ESD Gloves must be laundered periodically. Woolite works
well. Liquid detergents are better than dry in that there is less caking and frictional
wear. Launder glove in cool or warm water, tumble dry with low heat or hang dry.
Machine washing works well if using a standard house machine on gentle cycle. It is not
recommended to launder these gloves in heavy industrial laundry machines as it will lead
to premature wear. Gloves should be tumbled dry using low heat. DO NOT BLEACH. After
laundering, verify Rtt 1 x 10
5
to < 1 x 10
8
ohms.
Specifications and procedures subject to change without notice.
ESD Inspection Glove
DESCO WEST:
3651 WALNUT AVE., CHINO, CA 91710 WEB SITE:
Desco.com
PHONE (909) 627-8178
DESCO EAST:
ONE COLGATE WAY, CANTON, MA 02021-1407
PHONE (781) 821-8370
DRAWING NUMBER
68120
DATE:
May
2015
© 2015 DESCO INDUSTRIES INC.
Employee Owned
stm32/stm8
京公网安备 11010802033920号
EEWORLD
