DG508B, DG509B
www.vishay.com
Vishay Siliconix
Precision 8-Channel / Dual 4-Channel CMOS Analog Multiplexers
DESCRIPTION
The DG508B is an 8-channel single-ended analog
multiplexer designed to connect one of eight inputs to a
common output as determined by a 3-bit binary address
(A
0
, A
1
, A
2
). The DG509B is a dual 4-channel differential
analog multiplexer designed to connect one of four
differential inputs to a common dual output as determined
by its 2-bit binary address (A
0
, A
1
). Break-before-make
switching action protects against momentary crosstalk
between adjacent channels.
An on channel conducts current equally well in both
directions. In the off state each channel blocks voltages up
to the power supply rails. An enable (EN) function allows the
user to reset the multiplexer / demultiplexer to all switches
off for stacking several devices. All control inputs,
addresses (A
X
) and enable (EN) are TTL compatible over the
full specified operating temperature range.
The DG508B and DG509B are fabricated on an enhanced
SG-II CMOS process that achieves improved performance
on: reduced charge injection, lower device leakage, and
minimized parasitic capacitance.
As the DG508, DG509 has a long history in the industry with
many suppliers offering copies - and in some cases
improved variations - with the best in class improvements,
the Vishay Siliconix new version of the DG508B, DG509B
are the superior alternatives to what is currently available.
Applications for the DG508B, DG509B include high speed
and high precision data acquisition, audio signal switching
and routing, ATE systems, and avionics. High performance
and low power dissipation make them ideal for battery
operated and remote instrumentation applications.
The DG508B and DG509B have the absolute maximum
voltage rating extended to 44 V. Additionally, single supply
operation is also allowed. An epitaxial layer prevents
latch-up.
The DG508B and DG509B are both available in 16-lead
SOIC, TSSOP, PDIP, and miniQFN (1.8 mm x 2.6 mm)
package options with extended temperature range of -40 °C
to +125 °C.
For more information, refer to Vishay Siliconix DG508B,
DG509B evaluation board note.
FEATURES
• Operate with single or dual power supply
• V+ to V- analog signal swing range
• 44 V power supply maximum rating
• Extended operate temperature range:
-40 °C to +125 °C
• Low leakage typically < 3 pA
• Low charge injection - Q
INJ
= 2 pC
• Low power - I
SUPPLY
: 10 μA
• TTL compatible logic
• > 250 mA latch-up current per JESD78
• Available in SOIC16, TSSOP16, PDIP, and miniQFN16
packages
• Superior alternative to:
- ADG508A, DG508A, HI-508
- ADG509A, DG509A, HI-509
• Material categorization: for definitions of compliance
please see
www.vishay.com/doc?99912
BENEFITS
• Reduced switching errors
• Reduced glitching
• Improved data throughput
• Reduced power consumption
• Increased ruggedness
• Wide supply ranges (± 5 V to ± 20 V)
APPLICATIONS
• Data acquisition systems
• Audio and video signal routing
• ATE systems
• Medical instrumentation
S14-2382-Rev. E, 15-Dec-14
Document Number: 64821
1
For technical questions, contact:
analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
DG508B, DG509B
www.vishay.com
Vishay Siliconix
ORDERING INFORMATION
(DG509B)
TEMP. RANGE
PACKAGE
16-Pin SOIC
-40 °C to +125 °C
a
16-Pin TSSOP
16-Pin PDIP
16-Pin MiniQFN
PART NUMBER
DG509BEY-T1-E3
DG509BEQ-T1-E3
DG509BEJ-E3
DG509BEN-T1-GE4
ORDERING INFORMATION
(DG508B)
TEMP. RANGE
PACKAGE
16-Pin SOIC
-40 °C to +125 °C
a
16-Pin TSSOP
16-Pin PDIP
16-Pin MiniQFN
Note
a. -40 °C to +85 °C datasheet limits apply.
PART NUMBER
DG508BEY-T1-E3
DG508BEQ-T1-E3
DG508BEJ-E3
DG508BEN-T1-GE4
ABSOLUTE MAXIMUM RATINGS
PARAMETER
Voltages Referenced to V-
Digital Inputs
a
, V
S
, V
D
Current (Any terminal)
Peak Current, S or D (Pulsed at 1 ms, 10 % duty cycle max.)
Storage Temperature
(EY, EQ, EJ, EN suffix)
16-Pin Narrow SOIC
c
Power Dissipation (Packages)
b
16-Pin TSSOP
d
16-Pin PDIP
e
16-Pin miniQFN
f
16-Pin Narrow SOIC
c
Thermal Resistance (θJA)
b
LIMIT
V+
GND
44
25
(V-) - 2 to (V+) + 2
or 20 mA, whichever occurs first
30
100
-65 to +150
600
450
510
525
125
178
159.6
152
UNIT
V
mA
°C
mW
16-Pin TSSOP
d
16-Pin PDIP
e
16-Pin miniQFN
f
°C/W
Notes
a. Signals on SX, DX or INX exceeding V+ or V- will be clamped by internal diodes. Limit forward diode current to maximum current ratings.
b. All leads soldered or welded to PC board.
c. Derate 8 mW/°C above 70 °C.
d. Derate 5.6 mW/°C above 70 °C.
e. Derate 6.3 mW/°C above 70 °C.
f. Derate 6.6 mW/°C above 70 °C.
S14-2382-Rev. E, 15-Dec-14
Document Number: 64821
3
For technical questions, contact:
analogswitchtechsupport@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT
www.vishay.com/doc?91000
京公网安备 11010802033920号
EEWORLD
