ignations, and all other words and logos that are identified as trademarks and/or service marks are, unless noted otherwise, the trademarks and
service marks of Altera Corporation in the U.S. and other countries. All other product or service names are the property of their respective holders. Al-
tera products are protected under numerous U.S. and foreign patents and pending applications, maskwork rights, and copyrights. Altera warrants
performance of its semiconductor products to current specifications in accordance with Altera's standard warranty, but reserves the right to make
changes to any products and services at any time without notice. Altera assumes no responsibility or liability arising out of the ap-
plication or use of any information, product, or service described herein except as expressly agreed to in writing by Altera
Corporation. Altera customers are advised to obtain the latest version of device specifications before relying on any published in-
formation and before placing orders for products or services
.
ii
Altera Corporation
Contents
Chapter Revision Dates .......................................................................... vii
About This Handbook .............................................................................. ix
How to Find Information ........................................................................................................................ ix
How to Contact Altera ............................................................................................................................. ix
Typographic Conventions ........................................................................................................................ x
Section I. Stratix Device Family Data Sheet
Revision History ............................................................................................................................ Part I–1
Features ................................................................................................................................................... 1–2
LAB Control Signals ......................................................................................................................... 2–5
Logic Elements ....................................................................................................................................... 2–6
Fast PLLs ........................................................................................................................................ 2–100
Slew-Rate Control ........................................................................................................................ 2–120
Bus Hold ........................................................................................................................................ 2–121
Power Consumption ........................................................................................................................... 4–17
Timing Model ....................................................................................................................................... 4–19
Preliminary & Final Timing .......................................................................................................... 4–19
A great man on the forum contributed the pt2314 program, as shown in the attachment. I use proteus to simulate it, but it doesn't work. Logically, text should appear when simulating 51+1602, but nothi...
1. PieCtrlRegs.PIEIER1.bit.INTx6 = 1; // Enable PIE INT1.6 = ADCINTThis sentence implements Uint16 INTx6 = 1; How does it implement the assignment of register PIEIER1 in hardware?2. typedef interrupt ...
[i=s]This post was last edited by sonicfirr on 2022-3-12 13:08[/i]There is a small pit in setting up the Linux cross-toolchain compilation environment for the 86 board. After many attempts, I successf...
A newbie's help: I just bought a 2440 board. COM1 and USE are both shown as connected on DNW. But after powering on, DNW should display the startup information and then allow the user to enter LINUX. ...
Some small suggestions: Everyone knows the benefits of DIY learning, but I think it is not entirely about sharing learning materials. Each design participant (hardware and software) should post the pr...
In the previous article, I wrote a simple GPIO running light test, which looked a bit monotonous. I was used to serial port debugging. If there was no serial port on the board, I had to find another ...[Details]
The day before yesterday, I learned about STM's Systick and found it quite useful for precise timing. When I used CVAVR before, I found that the delay.h in it was very useful. So, I used STM32's...[Details]
1. The first project We are going to create the first project, which is mainly for project analysis, so that we can understand how CubeMX works and how to trace the code logic. Okay, no more nonsense...[Details]
Security PPP is a new model of urban video surveillance projects: 1) The government and social capital establish a project company in a certain proportion; 2) The project company participates in the ...[Details]
In 1952, Bell Labs built a 6-foot-tall automatic number recognition machine called "Audrey", which could recognize the pronunciation of the numbers 0 to 9 with an accuracy of more than 90%. And its...[Details]
Since China began to try to produce panels independently in 1998, in 2018, China's panel industry has gradually upgraded from a marginal industry to the largest production scale. Especially in the ...[Details]
Analysts have sorted out some interesting phenomena. Let's follow the embedded editor to learn about the relevant content.
Huawei emerged as a star in the all-
flash
array sales ra...[Details]
The adoption rate of serverless
cloud
computing
is gradually increasing, but it has not yet reached people's expectations. Various surveys show that serverless
is
still
an eme...[Details]
I rewrote the main part of this program. The program uses the watchdog as a normal timer and scans the digital tubes in the watchdog interrupt. In addition, I added a display buffer. If you want to d...[Details]
This program uses the eight-channel ADC single acquisition mode. According to the configuration, ADC12SC will automatically reset after the conversion is completed in the single mode, so it is necess...[Details]
As a leading company in automotive semiconductors, Freescale and Khronos Group have jointly launched an automotive multimedia embedded microprocessor i.MX35 with an integrated OpenVG hardware acceler...[Details]
//Observe the difference between feeding the dog and not feeding the dog, and use the LED indicator of the PB port for status indication. //Switch the LED indicator enable switch of the PB po...[Details]
LiDAR: Autonomous driving from the perspective of optoelectronic technology LiDAR and competing sensor technologies (camera, radar, and ultrasonic) intensify the need for sensor fusion and the need...[Details]
At this exhibition, Microsoft brought its flagship intelligent voice products - XiaoIce and Xiaona. In addition, the voice will be equipped with an intelligent face recognition system. Let's see ho...[Details]
ADI has established long-term good relationships with car manufacturers and Tier 1 component suppliers. Based on its previous long-term successful cooperation with new energy vehicles and suppliers a...[Details]