Pressure Connections and Recommended Installation Torque
Dimensions in mm [Inch]
Name
Thread
Torque
1/4 - 18 NPT
External
25 Nm
1/8 - 27 NPT
External
20 Nm
Stud End
DIN 3852-B-G1/4
External
20 Nm
Name
Thread
Torque
Tapped Hole
DIN 3852-Y-G1/4
Internal
15 Nm
3/8-24 UNF-2A PER
SAE J 1926/2
External
22 Nm
3/8-24 UNF-2B PER
SAE J 1926/1
Internal
22 Nm
Note: Recommended torque may varify according to material and specific application.
www.kavlico.com
P500 Data Sheet
4
How to Order
Pressure Connection (port)
Seal Material
D
Fluorocarbon / Viton (-25° to
+125°C)
E
Fluorosilicone (-40° to 125°C)
F
Ethylene Propylene (-30° to 120°C)
1
1/4 - 18 NPT (External Threads)
4
1/8 - 27 NPT (External Threads)
5
Stud End DIN 3852-B-G 1/4 (External Threads)
6
Tapped Hole DIN 3852-Y-G 1/4 (Internal Threads)
9
3/8 - 24 UNF-2A Per SAE J1926/2 (External Threads)
10
3/8 - 24 UNF-2B Per SAE J1926/1 (Internal Threads)
P500
Pressure Ranges
1B
0 – 1 Bar
15
20
30
50
75
16B
A
Reference
E
1
A
Built-in Electrical Connection
A
With Mating Connector, w/12”, 18 AWG
Leads
C
Without Mating Connector
0 – 15 PSI
0 – 20 PSI
0 – 30 PSI
0 – 50 PSI
0 – 75 PSI
A
Absolute
G
Gage
S
Sealed Gage (Referenced to 14.7
PSIA)
1.6B
0 – 1.6 Bar
2.5B
0 – 2.5 Bar
4B
0 – 4 Bar
6B
0 – 6 Bar
10B
0 – 10 Bar
16B
0 – 16 Bar
25B
0 – 25 Bar
40B
0 – 40 Bar
50B
0 – 50 Bar
70B
0 – 70 Bar
100
0 – 100 PSI
150
0 – 150 PSI
200
0 – 200 PSI
300
0 – 300 PSI
500
0 – 500 PSI
750
0 – 750 PSI
1000
0 – 1000PSI
Example:
P500 -16B - A - E1A
Description:
P500 Sensor, 0 - 16 Bar Absolute, Fluorosilicone Seal Material, 1/4 - 18 NPT Pressure Connection,
with Mating Connector
Before installation and operation, ensure that the appropriate pressure sensor has been selected in terms of pressure range, design and specific measuring
conditions. Non-compliance can result in serious injury and/or damage to the equipment.
Warning:
The product information contained in this catalogue is given purely as information and does not constitute a representation, warranty or any form of
contractual commitment. Kavlico reserve the right to modify their products without notice. It is imperative that we should be consulted over any particular use
or application of our products and it is the responsibility of the buyer to establish, particularly through all the appropriate tests, that the product is suitable for
the use or application. Under no circumstances will our warranty apply, nor shall we be held responsible for any application (such as any modification, addition,
deletion, use in conjunction with other electrical or electronic components, circuits or assemblies, or any other unsuitable material or substance) which has not
been expressly agreed by us prior to the sale of our products.
1.warning: entry point symbol _c_int00 undefined When using C to write DSP, the entry address is defined in the rts.lib library: _c_int00. When using assembly language programming, there is no need to...
I was working on EBOOT recently. I wanted to modify the startup screen first, so I modified InitialImage_rgb16_320x240.h by myself. I just changed all the 0XFFFFFFFF to 0X00000000, and then refreshed ...
Can SAM R21 communicate with 2530 on-demand network? If so, what should be modified on both sides? In addition, if anyone has tried it, is the data transmission speed between the two sides fast? I am ...
I just learned some time ago that AVR download cables are divided into ASP and ISP. I found out that the ASP I bought cannot communicate via serial port. I didn’t install the driver at that time. It w...
[i=s] This post was last edited by w545029118 on 2014-7-13 20:25 [/i] [align=left][font=宋体][size=4][color=#0000ff][b]Foreword [/b][/color][/size][/font][/align][align=left][font=宋体] I suddenly receive...
When the WDP500-2A plane grating monochromator is used to test the emission wavelength of a high-power laser diode at different currents, the matching of the laser diode has the disadvantages of lo...[Details]
Remote keyless entry (RKE) systems have become popular with users, with more than 80% of new cars in North America and more than 70% in Europe equipped with RKE systems. In addition to the obvious ...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
As cellular phones become more advanced, the power consumption of the system during operation and the power consumption during standby are also increasing. Therefore, the power management design of...[Details]
In recent years, lighting has become an important area that countries around the world are targeting to promote energy conservation and environmental protection. According to statistics, about 20% ...[Details]
In the previous series, we have listed some basic knowledge of C language in Tables 1 to 3. We hope that beginners can strengthen their memory of the above tables and gradually learn to use them wh...[Details]
1. System Structure
This system is a simulation system of indoor air-conditioning temperature/humidity control system. The data acquisition and control center collects temperature/humidity...[Details]
1 Introduction
Intelligent control instruments are one of the most commonly used controllers in industrial control. They are mainly aimed at a specific parameter (such as pressure, tempera...[Details]
0 Introduction
With the rise and continuous improvement of the solid-state lighting industry, light-emitting diodes (LEDs) have become an alternative lighting technology and are gr...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
Abstract: The output of high-range acceleration sensor is less than 10 mV under the excitation of small signal. The noise of traditional test system may cover such small voltage signal, so that hig...[Details]
With the widespread application of new services and technologies in the communications industry, the scale and capacity of operators' network construction are getting larger and larger, and the ris...[Details]
Only a small number of LED manufacturers can produce high-quality LEDs. For applications that are only used for simple indication, low-quality LEDs are sufficient. However, high-quality LEDs must...[Details]
The rectified DC voltage is then converted back to AC using power electronics such as insulated gate bipolar transistors.
The output voltage is switched on and off at a high frequency, control...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
