1. Contact rating - Product of the switching voltage and current should never exceed the wattage rating. Contact Littelfuse for additional load/life information.
2. When switching inductive and/or capacitive loads, the effects of transient voltages and/or currents should be considered. Refer to Application Notes AN108A and AN107 for details.
3. Breakdown Voltage - per MIL-STD-202, Method 301.
4. Electrical Load Life Expectancy - Contact Littelfuse with voltage, current values along with type of load.
5. This resistance value is for 11.81mm wire length. Resistance changes when wire lengthens.
6. Operate (including bounce)/Release Time - per EIA/NARM RS-421-A, diode suppressed coil (Coil II).
7. Shock and Vibration - per EIA/NARM RS-421-A and MIL-STD-202.
8. For custom modifications to the wire length or size, or adding a special connector, please contact Littelfuse.
What is TCP protocol? English original meaning: Transmission Control Protocol Chinese interpretation: (RFC-793) Transmission Control Protocol This protocol is mainly used to establish a virtual connec...
1. Layout of components on SMT-PCB When the circuit board is placed on the conveyor belt of the reflow soldering furnace, the long axis of the components should be perpendicular to the transmission di...
In addition to the key interrupt capability of the P1.3 port of the MSP430G2553, can an external key be connected as an interrupt? Can the program be written using the interrupt method instead of the ...
【Chuanglong TL570x-EVM】Evaluation 05 Linux Application Development Manual
1. Study of Linux application development casesPractical testThere is one obvious difference between my actual use and the dev...
I hope this article will be helpful to those who are just starting to learn embedded systems and need to use ADS. This article is quoted from Feiling Embedded Technology Forum http://www.witech.com.cn...