Maximum insulator temperature 191°C max, solder wave process only
UL File No.: E68080
3
Electronic Solutions Division
Interconnect Solutions
www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Low Profile Header
.100” × .100” Straight and Right Angle, Four-Wall
303 Series
Table 1
Pin
Quantity
B
Position 2
.108
[ 2.74 ]
.015
[ 0.38 ]
.33
[ 8.4 ]
Straight
.100 Ref [2.54]
Dimensions
A
.60 [ 15.4 ]
.70 [ 17.8 ]
.80 [ 20.3 ]
1.00 [ 25.4 ]
1.10 [ 27.9 ]
1.30 [ 33.0 ]
1.60 [ 40.6 ]
2.00 [ 50.8 ]
2.10 [ 53.6 ]
2.30 [ 58.4 ]
2.80 [ 71.1 ]
B
.51 [ 12.9 ]
.61 [ 15.5 ]
.71 [ 18.0 ]
.91 [ 23.1 ]
1.01 [ 25.6 ]
1.21 [ 30.7 ]
1.51 [ 38.4 ]
1.91 [ 48.5 ]
2.01 [ 51.0 ]
2.21 [ 56.1 ]
2.71 [ 68.8 ]
06
08
10
14
16
20
26
34
.256
±
.008
[6.50]
.100 Ref [2.54]
Position 1
Position 1 Orientation Triangle
.27
[ 6.86 ]
.16
[4.1]
36
40
50
A
.365
±
.010
.015 [9.3]
[ 0.38 ]
.25 [6.4]
.025
±
.002 Sq
[0.64]
.236
±
.008
[ 5.99 ]
A
A
±
.02
.400 [10.16]
Min End
Stackable
Distance
ø.040
±
.003
[ 1.01 ]
.100 Ref
[2.54]
.110
±
.008
[ 2.79 ]
.250 [6.35]
Min Side
Stackable
Distance
.197
[ 5.00 ]
Section A-A
Position 1 as
indicated be
Triangle
.100
±
.003
[2.54]
.100
±
.003
[2.54]
Tolerance Unless Noted
.0
Inch
±.1
.00
±.01
Inch
[mm]
Recommended P.C. Board Hole Pattern
(Shown for mounting side of board.)
.000
±.005
Note 1: No ejector/latch option available.
2. Low temperature plastic. Check compatibility with “no lead” processing conditions prior to production use.
[ ] Dimensions for
Reference only
Ordering Information
303XX - 6002HB
(RIA E1 and C1 apply)
Pin Quantity:
(See Table 1)
HB - Gold Flash
TS-0818-C
Sheet 2 of 3
3
Electronic Solutions Division
Interconnect Solutions
www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Low Profile Header
.100” × .100” Straight and Right Angle, Four-Wall
303 Series
Pin
Quantity
.108
[ 2.74 ]
Right Angle
B
Position 2
Table 1
Dimensions
.60 [ 15.2 ]
.70 [ 17.8 ]
.80 [ 20.3 ]
1.00 [ 25.4 ]
1.10 [ 27.9 ]
1.30 [ 33.0 ]
1.60 [ 40.6 ]
2.00 [ 50.8 ]
2.10 [ 53.6 ]
2.30 [ 58.4 ]
2.80 [ 71.1 ]
06
08
10
14
16
.015
[ 0.38 ]
A
.51 [ 12.9 ]
.61 [ 15.5 ]
.71 [ 18.0 ]
.91 [ 23.1 ]
1.01 [ 25.6 ]
1.21 [ 30.7 ]
1.51 [ 38.4 ]
1.91 [ 48.5 ]
2.01 [ 51.0 ]
2.21 [ 56.1 ]
2.71 [ 68.8 ]
B
20
26
34
36
40
50
.100 Ref
[2.54]
.100 Ref [2.54]
Position 1
Position 1
Orientation
Triangle
.16 [4.11
.33
[ 8.4 ]
.256
±
.008
[ 6.50 ]
.25 [6.4]
.025
±
.002 Sq Ref [0.64]
A
.236
±
.008
[ 5.99 ]
.27 [6.86 ]
ø.365
±
.010
[ 9.3 ]
.056
±
.008
[ 14.2 ]
.015
[ 0.381 ]
A
A
±
.02
.110
±
.008
[ 2.79 ]
.100 Ref [2.54]
Section A-A
.41 [10.4]
Max Dim to Edge of
PCB for Bussing
.100
±
.003
[2.54]
ø .040
±
.003
[ 0.10 ]
Position 1
.100
±
.003
[2.54]
( Shown for mounting side of board )
.400 [10.16] Min End
Stackable
Distance
Tolerance Unless Noted
.0
Inch
±.1
.00
±.01
Inch
[mm]
.000
Recommended P.C. Board Hole Pattern
Note 1: No ejector/latch option available.
±.005
[ ] Dimensions for
Reference only
Ordering Information
303XX - 5002HB
(RIA E1 and C1 apply)
Pin Quantity:
(See Table 1)
HB - Gold Flash
TS-0818-C
Sheet 3 of 3
3
Electronic Solutions Division
Interconnect Solutions
www.3Mconnectors.com
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness
is not guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated
with such use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order
shall have no force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one (1) year from the time of purchase.
3M MAKES NO OTHER WARRANTIES
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
If this product is defective within the
warranty period stated above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product.
Except
where prohibited by law, 3M will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of
[i=s]This post was last edited by Chuan Chuan Ge on 2015-10-19 10:59[/i] I bought a Beaglebone black development board and downloaded the BSP for the board from the QNX official website [url=http://co...
/************************************************************************/ void delay(unsigned int k) //delay function { unsigned int x,y; for(x=0;x=3)posit=0;}...
[size=4]The following table shows the radio frequency bands divided by the International Telecommunication Union (ITU):[/size] [size=4][/size] [size=4]Generally speaking, frequencies of 1 GHz and abov...
PV DC fuses are safety devices used to protect PV panels, inverters, and DC loads. To ensure their safety and reliability, they must be UL248 certified.
Before applying for UL248 certifi...[Details]
Electric vehicles are currently gaining momentum, but this is just a facade. Fuel-powered vehicles remain unchallenged. While electric vehicles boast unique advantages in environmental emissions an...[Details]
"Have you set your calendar reminder?"
On August 24, Nvidia Robotics' official account posted a photo of a black gift box on a social media platform, with an attached greeting card sig...[Details]
The most significant feature of IPS panels is that both electrodes are located on the same surface, unlike other LCD panels, which have electrodes arranged on top and bottom surfaces in a three-dim...[Details]
Today's security industry has entered the era of massive networking. Many enterprises, especially financial institutions, have established multi-level video surveillance networking platforms. Lever...[Details]
With the rapid advancement of automation technology, collaboration between robots is no longer just science fiction. Imagine dozens of machines moving goods in a warehouse without interfering with ...[Details]
The automotive industry in 2025 is undergoing a thorough intelligent reshuffle.
Geely wants to make changes in the field of AI cockpits: in the future, there will be no traditional smart...[Details]
Reflow soldering is one of the most commonly used methods in electronics manufacturing, allowing for the soldering of large numbers of components in a relatively short time. However, any experience...[Details]
In daily life, power transformers have different functions and uses due to different usage scenarios. The most common ones can be divided into: control transformers, isolation transformers, rectifi...[Details]
"I want to ask why there are so many manufacturers making mobile phone CPUs, but only Intel and AMD make computer CPUs?"
The progress of domestic PC CPU production has disappointed many ...[Details]
In this final installment of a five-part blog series, I will discuss noise in op amps driving headphone loads and some techniques for reducing it. Previous posts have discussed headphone load power...[Details]
The Waveshare ESP32-P4-ETH is a compact ESP32-P4 development board with Ethernet and PoE support. It looks very similar to the Olimex ESP32-P4-DevKit, minus the pUEXT connector. However, we've also...[Details]
Reasons for the wear of the roller press reducer shaft:
1. Since the expansion sleeve is subjected to a large torque, the mating surfaces of the shaft and the sleeve move relative to each other...[Details]
The intelligent
dust monitoring system intelligently monitors dust concentrations at and around construction sites. All concentration values are transmitted to a cloud server for
cloud co...[Details]
The primary control objective in this case is the display and alarming of data parameters on the Xinheng control scale instrument. The system's main PLC uses a Siemens CPU, and data is collected vi...[Details]