Tartan
8934
Technical Data
™
Utility Filament Tape
June, 2015
Tartan™ Utility Filament Tape 8934 is a glass filament reinforced tape for
light duty strapping, bundling and reinforcing. It has a synthetic rubber resin
adhesive with good adhesion to most fiberboard surfaces, and a variety of
plastics and metal surfaces.
Product Description
Product Construction
Backing
Polypropylene film
Adhesive
Pressure sensitive
synthetic rubber-resin
Reinforcement
Glass yarn
Backing Color
Clear
Typical Physical
Properties
Note: The following technical information and data should be considered representative
or typical only, and should not be used for specification purposes.
ASTM Test Method
Adhesion to Steel:
Tensile Strength:
Elongation at Break:
Total Thickness:
48 oz./in. width (53 N/100 mm width)
100 lbs./in. width (1751 N/100 mm width)
3%
4.0 mil (0.102 mm)
D-3330
D-3759
D-3759
D-3652
Features
• Abrasion and moisture resistant.
• High tensile strength.
• Allows printing and illustrations to
be seen through the tape.
• Good shear and initial adhesion.
• Good aging.
• Protection of filaments and adhesive
to provide longer package life.
• Less tape needed at lower cost for
applications where high tensile
strength is a main requirement.
• Good holding under wide range
of application conditions with
minimum amount of tape.
• Holds with minimum rub-down.
• Boxes remain closed for long
period of time.
Available Sizes
Standard Widths:
Core Size (ID):
Lengths:
9 mm, 12 mm, 18 mm, 24 mm, 36 mm, 48 mm, 72 mm
3 in. (76.2 mm)
55 m
[Custom width and length available]
Tartan
™
Utility Filament Tape
8934
Application
Techniques
An extensive line of hand-held tape dispensers is available. Application of Tartan™
Utility Filament Tape 8934 is most easily accomplished at room temperature.
At lower temperatures approaching 32°F (0°C), the adhesive becomes firm. Once
applied, Tartan tape 8934 performs well throughout the normal temperature ranges
typically encountered by packaged products in shipping and storage environments.
Storage Conditions
Store in a clean, dry place. Temperature of 40-80°F (4-26°C) and 40 to 50%
relative humidity are recommended. Rotate your stock.
Shelf Life
To obtain best performance, use this product within 18 months from date of
manufacture.
Technical Information
The technical information, recommendations and other statements contained in this document are based
upon tests or experience that 3M believes are reliable, but the accuracy or completeness of such
information is not guaranteed.
Product Use
Many factors beyond 3M’s control and uniquely within user’s knowledge and control can affect the use
and performance of a 3M product in a particular application. Given the variety of factors that can affect the
use and performance of a 3M product, user is solely responsible for evaluating the 3M product and
determining whether it is fit for a particular purpose and suitable for user’s method of application.
Warranty,
Limited Remedy,
and Disclaimer
Unless an additional warranty is specifically stated on the applicable 3M product packaging or product
literature, 3M warrants that each 3M product meets the applicable 3M product specification at the time
3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR
IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY OR
CONDITION ARISING OUT OF A COURSE OF DEALING, CUSTOM OR USAGE OF TRADE. If the 3M
product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option,
replacement of the 3M product or refund of the purchase price.
Limitation of Liability
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the 3M product,
whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted,
including warranty, contract, negligence or strict liability.
This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.
Industrial Adhesives and Tapes Division
3M Center, Building 225-3S-06
St. Paul, MN 55144-1000
800-362-3550 • 877-369-2923 (Fax)
www.3M.com/industrial
Recycled Paper
40% pre-consumer
10% post-consumer
Tartan is a trademark of 3M Company.
Printed in U.S.A.
©3M 2015 (6/15)
京公网安备 11010802033920号
EEWORLD
