3
Cleanroom Very High-Tack Tape
1254
Technical Data
Discontinued January 1, 2011. No suggested replacement.
February, 2006
Product Description
3M™ Cleanroom Very High-Tack Tape 1254 is a polyester film tape with very
high adhesion to most surfaces. This product is ideal for cleanroom construction
and maintenance applications.
Construction
Backing
Polyester
Adhesive
Rubber resin
Color
Transparent
Standard Roll Sizes
3/4 in., 1 in., 2 in. x 36 yds.
(19 mm, 25 mm, 50 mm x 33 m)
Typical Physical
Properties and
Performance
Characteristics
Note: The following technical information and data should be considered representative
or typical only and should not be used for specification purposes.
ASTM Test Method
Adhesion to:
Stainless steel
Polypropylene
Polyethylene
Tensile Strength at Break:
Elongation at Break:
Tape Thickness:
Outgassing by Headspace GC Analysis
1
Total outgassing
1
D-3330
145 oz./in. (160 N/100 mm)
110 oz./in. (120 N/100 mm)
60 oz./in. (65 N/100 mm)
43 lbs./in. (754 N/100 mm)
120%
4.1 mils (0.10 mm)
0.6% by weight
D-3759
D-3759
D-3652
D-4526
2
Outgassing = Dynamic headspace analysis of volatile components collected during a 4 hour @ 80°C
heat cycle using a Hewlett-Packard Model 5890 Series II gas chromatograph coupled with a Hewlett-
Packard Model 5989B mass spectrometer.
2
ASTM test method modified per footnote #1 above.
General Information
• Product is converted, cleaned, and packaged in cleanroom.
• Rolls are wound onto plastic cores and bagged with Class 100 clean film.
• Application temperature: 16° to 40°F (-9° to 4°C).
Application Ideas
• Joining, sealing, repairing, holding, and reinforcing a variety of difficult-to-hold
materials, such as flexible polyethylene cleanroom partition.
• Repair of air vent leaks.
• General cleanroom construction and maintenance.
3M Cleanroom Very High-Tack Tape
™
Discontinued January 1, 2011. No suggested replacement.
1254
Key Attributes
Features
Polyester backing
Advantages
Abrasion, chemical and
thermal resistant
High strength
Benefits
Resists failure and reduce
contamination
Broad range of difficult
applications
Adhere well to many difficult-
to-stick-to surfaces
No adhesive transfer
reduced rework
Rubber resin adhesive
Aggressive adhesion
Short-term clean removal
from many surfaces
(testing recommended)
Storage
Store at 60° to 80°F (15° to 27°C) and 40 to 50% relative humidity
Shelf Life
To obtain best performance, use this product within 18 months from date of
manufacture.
For Additional
Information
To request additional product information or to arrange for sales assistance, call toll free 1-800-251-8634.
Address correspondence to: 3M Electronics Markets Materials Division, Building 21-1W-10, 900 Bush
Avenue, St. Paul, MN 55144-1000. Our fax number is 651-778-4244 or 1-877-369-2923. In Canada,
phone: 1-800-634-3577. In Puerto Rico, phone: 1-787-750-3000. In Mexico, phone: 52-70-04-00.
Product Use
All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.
Warranty and
Limited Remedy
Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.
Limitation of Liability
3
Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory
asserted, including warranty, contract, negligence or strict liability.
3M Electronics
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000
1-800-251-8634 phone
651-778-4244 fax
www.3M.com/electronics
Recycled Paper
40% pre-consumer
10% post-consumer
Printed in U.S.A.
©3M 2006 60-5002-0034-4
(2/06)