K7A323630C
K7A321830C
Preliminary
1Mx36 & 2Mx18 Synchronous SRAM
36Mb Sync. Pipelined Burst SRAM
Specification
100TQFP with Pb / Pb-Free
(RoHS compliant)
INFORMATION IN THIS DOCUMENT IS PROVIDED IN RELATION TO SAMSUNG PRODUCTS,
AND IS SUBJECT TO CHANGE WITHOUT NOTICE.
NOTHING IN THIS DOCUMENT SHALL BE CONSTRUED AS GRANTING ANY LICENSE,
EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE,
TO ANY INTELLECTUAL PROPERTY RIGHTS IN SAMSUNG PRODUCTS OR TECHNOLOGY.
ALL INFORMATION IN THIS DOCUMENT IS PROVIDED
ON AS "AS IS" BASIS WITHOUT GUARANTEE OR WARRANTY OF ANY KIND.
1. For updates or additional information about Samsung products, contact your nearest Samsung office.
2. Samsung products are not intended for use in life support, critical care, medical, safety equipment, or simi-
lar applications where Product failure could result in loss of life or personal or physical harm, or any military
or defense application, or any governmental procurement to which special terms or provisions may apply.
* Samsung Electronics reserves the right to change products or specification without notice.
-1-
Rev. 0.2 April 2006
K7A323630C
K7A321830C
Preliminary
1Mx36 & 2Mx18 Synchronous SRAM
1Mx36 & 2Mx18-Bit Synchronous Pipelined Burst SRAM
FEATURES
• Synchronous Operation.
• 2 Stage Pipelined operation with 4 Burst.
• On-Chip Address Counter.
• Self-Timed Write Cycle.
• On-Chip Address and Control Registers.
• V
DD
= 2.5 or 3.3V +/- 5% Power Supply.
• 5V Tolerant Inputs Except I/O Pins.
• Byte Writable Function.
• Global Write Enable Controls a full bus-width write.
• Power Down State via ZZ Signal.
• LBO Pin allows a choice of either a interleaved burst or a linear
burst.
• Three Chip Enables for simple depth expansion with No Data Con-
tention only for TQFP ; 2cycle Enable, 1cycle Disable.
• Asynchronous Output Enable Control.
• ADSP, ADSC, ADV Burst Control Pins.
• TTL-Level Three-State Output.
• 100-TQFP-1420A (Lead and Lead free package)
• Operating in commeical and industrial temperature range.
GENERAL DESCRIPTION
The K7A323630C and K7A321830C are 37,748,736-bit
Synchronous Static Random Access Memory designed for
high performance second level cache of Pentium and
Power PC based System.
It is organized as 1M(2M) words of 36(18) bits and inte-
grates address and control registers, a 2-bit burst address
counter and added some new functions for high perfor-
mance cache RAM applications; GW, BW, LBO, ZZ. Write
cycles are internally self-timed and synchronous.
Full bus-width write is done by GW, and each byte write is
performed by the combination of WEx and BW when GW is
high. And with CS
1
high, ADSP is blocked to control sig-
nals.
Burst cycle can be initiated with either the address status
processor(ADSP) or address status cache control-
ler(ADSC) inputs. Subsequent burst addresses are gener-
ated internally in the system′s burst sequence and are
controlled by the burst address advance(ADV) input.
LBO pin is DC operated and determines burst
sequence(linear or interleaved).
ZZ pin controls Power Down State and reduces Stand-by
current regardless of CLK.
The K7A323630C and K7A321830C are fabricated using
SAMSUNG′s high performance CMOS technology and is
available in a 100pin TQFP package. Multiple power and
ground pins are utilized to minimize ground bounce.
FAST ACCESS TIMES
PARAMETER
Cycle Time
Clock Access Time
Output Enable Access Time
Symbol
t
CYC
t
CD
t
OE
-20
5.0
3.1
3.1
Unit
ns
ns
ns
LOGIC BLOCK DIAGRAM
CLK
LBO
CONTROL
REGISTER
ADV
ADSC
BURST CONTROL
LOGIC
BURST
ADDRESS
COUNTER
A
0
~A
1
A
0
~A
19
or A
0
~A
20
ADDRESS
REGISTER
1Mx36 , 2Mx18
MEMORY
ARRAY
A′
0
~A′
1
A
2
~A
19
or A
2
~A
20
ADSP
CS
1
CS
2
CS
2
GW
BW
WEx
(x=a,b,c,d or a,b)
OE
ZZ
DATA-IN
REGISTER
CONTROL
REGISTER
CONTROL
LOGIC
OUTPUT
REGISTER
BUFFER
DQa
0
~ DQd
7
or DQa0 ~ DQb7
DQPa,DQPb
DQPa ~ DQPd
-4-
Rev. 0.2 April 2006
Power technology
京公网安备 11010802033920号
EEWORLD
