P
RODUCT
S
PECIFICATION
Z8ICE001ZEM
Z8P
LUS
E
MULATOR
KIT CONTENTS
Documentation
Circuit Board
Z8M001 Emulation Board (99C0603-001)
Cables
18-Pin Emulation Pod Cable
9-Pin M–F Serial Cable (6 ft.)
Host Software
ZiLOG Developer Studio (ZDS) CD-ROM
ZiLOG 1999 Technical Library
CD ROM, which
contains Z8 device data sheets, user manuals,
application notes, and other valuable information.
Z8ICE001ZEM Emulator User's Manual
Z8ICE001ZEM User’s Manual Addendum
OPTIONAL ITEMS NOT SUPPLIED
¥
Laboratory Power Supply with Supply Current of 0.5A
@9VDC or 9 VDC, 500 mA Wall Transformer
(ZPS09V00ZAC)
– ZiLOG recommends a laboratory-type power sup-
ply when using circuits sensitive to noise, such as
analog-to-digital converters
SOIC-to-DIP Programming Adapter (Z86E0700ZDP)
– 18-Pin SOIC-to-DIP Programming Adapter
¥
¥
SSOP-to-DIP Programming Adapter (Z8E00101ZDH)
– 20-Pin SSOP-to-DIP Programming Adapter for
Z8M001-based emulators
A Custom Z8Plus-Based Design
– This design is typically a wire-wrapped or printed
circuit prototype that includes a socket for the
Z8E00X device into which the designer can insert
the emulation cable from the emulator.
¥
DS008801-Z8X1299
1
Z8ICE001ZEM
Z8Plus Emulator
ZiLOG
FEATURES
Supported Products
Packages
18-Pin PDIP
18-Pin PDIP
18-Pin SOIC
18-Pin SOIC
20-Pin SSOP
20-Pin SSOP
Emulation
Z8E000, Z8E001
Z8PE001, Z8PE002, Z8PE003
n/a
n/a
n/a
n/a
OTP Programming
Z8E000, Z8E001
Z8PE001, Z8PE002, Z8PE003
Z8E000, Z8E001
1
Z8PE001, Z8PE002, Z8PE003
1
Z8E000, Z8E001
2
Z8PE001, Z8PE002, Z8PE003
2
Notes:
1. Requires an SOIC-to-DIP Programming Adapter (Z86E0700ZDP) that is an 18-Pin SOIC-to-DIP adapter for Z8M001-based
emulators.
2. Requires an SSOP-to-DIP Programming Adapter (Z8E00101ZDH) that is a 20-Pin SSOP-to-DIP adapter for Z8M001-based
emulators.
¥
¥
¥
¥
In-Circuit Program Debug Emulation
Real-Time Emulation
Z8 GUI Emulator Software
Window-Based User Interface
¥
¥
¥
¥
On-Line Help
One-Time Programmable (OTP) Support
Selectable Baud Rates—9600 to 57.6 Kbps
Bisync Error-Correcting Communications Protocol
GENERAL DESCRIPTION
ZiLOG’s in-circuit emulators are interactive, Window-ori-
ented development tools, providing a real-time environ-
ment for emulation and debugging.
The Z8ICE001ZEM Emulator is a member of ZiLOG’s
ICEBOX product family of in-circuit emulators providing
support for Z8Plus-based microcontrollers. The emulator
provides essential timing and I/O circuitry to simplify user
emulation of the prototype hardware and software product.
The Z8ICE001ZEM Emulator provides users with a hard-
ware platform to develop and debug software in a real-time
environment. In contrast, software simulators provide sig-
nificantly slower operation, making them less practical for
code development.
The Z8ICE001ZEM Emulator can be connected to a serial
port (COM1, COM2, COM3, and COM4) of the host com-
puter, and uses ZiLOG’s Developer Studio (ZDS) software.
2
DS008801-Z8X1299
ZiLOG
Z8ICE001ZEM
Z8Plus Emulator
OPERATING INSTRUCTIONS
1. Check Supporting Package Contents
2. Load Software
a. Insert the ZiLOG Developer Studio CD into your
CD-ROM drive.
b. Follow all on-screen instructions.
Note:
For this example, please load the ZDS software, and not
the 1999 Technical Library CD-ROM.
d. Select the microcontroller and ROM size in the
Configuration
dialog box.
e. Use the
File
menu to download sample files to Z8
Code Memory.
f.
Refer to the Z8ICE000ZEM Emulator User’s
Manual, “Chapter 3: Emulator Sample Session”.
c. Remove the CD-ROM and store in a safe place.
3. Connect the appropriate cables
a. Power Supply, PC, and Your Design.
4. Read the enclosed technical documentation
a. Refer to the Z8ICE000ZEM Emulator User’s
Manual.
b. Observe the Electrical Safeguards in the User’s
Manual before operating the emulator.
c. Select the correct COM port and desired baud rate
in the ZiLOG ICEBOX
Connect
dialog box.
DS008801-Z8X1299
3
Z8ICE001ZEM
Z8Plus Emulator
ZiLOG
SPECIFICATIONS
Operating Conditions
Operating Temperature:
20
°
C
±
10
°
C
Supply Voltage:
+7.5 VDC to 10.0 VDC
(+8.0 VDC typical)
10-MHz external Crystal
(shipped with 10-MHz oscillator)
Operating Humidity:
10%–90% RH (noncondensing)
Power Requirements
+9.0 VDC @ 0.5A Minimum (typical)
Dimensions
Width:
6.75 in. (17.15 cm)
Length:
7.50 in. (19.05 cm)
Height:
0.90 in. (2.30 cm)
Serial Interface
RS-232C @ 9600, 19200 (default), 28800, or 57600
Baud
HOST COMPUTER
Minimum Requirements
IBM PC (or 100-percent compatible) 486-Based
Machine
75 MHz
8 MB RAM
VGA Video Adapter
Hard Disk Drive (60 MB free space)
CD-ROM Drive
RS-232C COM Port
Mouse or Pointing Device
Microsoft Windows 95 or later
The following changes to the Minimum Requirements are
recommended:
Pentium-Based Machine
100 MHz (or faster)
16 MB of RAM (or more)
SVGA Video Adapter
Color Monitor
Printer
4
DS008801-Z8X1299
ZiLOG
Z8ICE001ZEM
Z8Plus Emulator
PRECAUTIONS
All Devices
1. This emulator is only supported by ZDS version 2.12
or later.
2. The emulator cannot be operated while performing
ESD/EMI testing on the target board.
3. Ensure that the target cable is correctly aligned (pin 1
to pin 1) before inserting into the target system.
Incorrect alignment may damage the emulator and/or
the target system.
4. If the Program Counter jumps to an unknown address:
a. The Stack may have overflowed into the general-
purpose register locations, and/or
b. An extra
POP
,
PUSH
,
IRET
, or
RET
was
encountered.
5. If the Program keeps resetting:
a. The Program Counter rolled over from value
end
address
to value
0000
and proceeded back to the
beginning of the program.
b. The Watch-Dog Timer (
WDT
) was not refreshed
from devices with the
WDT
feature.
6. Check the
T
POR
and
T
WDT
specifications of the device
required for emulation. The actual specification may
differ from the ICE chip specifications.
7. Do not start the emulator with an OTP device in the
programming socket. The emulator may not start up
correctly and the device may become corrupted.
8. A shorted OTP device can crash the emulator when
inserted into the OTP programming socket. If a part is
inserted in such a way as to cause a temporary short,
then functionality is lost. An attempt to perform
BLANK CHECK
on such a part causes the
hourglass
to
appear continuously. The Windows application must
be reset and restarted.
9. Do not press the emulator’s
MASTER RESET
when
the ICEBOX is in the OTP dialog for programming. If
MASTER RESET
is pressed while the GUI is
performing OTP programming, close the
OTP
dialog
box and reopen it to reload the information back to the
hardware.
Notes:
The
MASTER RESET
is physically located on the inside
of the ICEBOX, and is not to be confused with the
RESET
button on the outside of the unit.
In this instance, he ICEBOX is really idle, although the
Command Status indicates
PROCESSING
after the GUI
reestablishes the communication link when Retry is
selected in the Out of Synchronization with the Emulator
dialog box.
10. When device serialization is enabled in the
OTP
dialog, ZDS copies the current serial number to code
memory immediately before performing a
VERIFY
operation. If this software action is undesirable, then
device serialization should be disabled prior to
invoking the
VERIFY
operation.
11. When interrupts are enabled, breakpointing after a
HALT
instruction, the emulator breaks at the first
instruction in the interrupt service routine that is
serviced when an interrupt occurs.
12. The
RESET
default state of the emulator differs from
the parts. Particularly, the
TCTLHI
register is reset
differently than the device. Set this register to the
desired value as the first instruction in the program.
13. The emulator does not execute the first instruction to
load the
TCTLHI
register if the user presses
RESET
and
then
GO
from ZDS or the GUI. For the first instruction
to execute correctly, the user should press the
RESET+GO
button.
DS008801-Z8X1299
5
京公网安备 11010802033920号
EEWORLD
