Access
®
5000 Series Raceway
WIREMOLD
®
Aesthetically Pleasing, Nonmetallic, Low-Profile,
Multiple Channel Raceway System
Access
®
5000 Raceway conceals
and organizes electrical wiring and
low-voltage cabling in low-profile,
decorative molding. The dual channels
and low-profile device plates of this
attractive raceway provide multiple
options for power and communications
cabling.
Access 5000 Raceway also saves time
and money because it installs faster and
cleaner than conventional in-wall wiring.
It’s also more energy efficient because
walls, vapor barriers and insulation remain
intact. And it’s a snap to reconfigure when
adding wiring or cabling to homes, offices,
classrooms or hotels.
Access 5000 Series Raceway installed as baseboard.
FEATURES & BENEFITS
n
Dual channel raceway.
Power and low-voltage can
be run in same raceway.
n
Modular device brackets and faceplates.
New and
emerging power or communications technologies can
be integrated into existing installations reducing overall
life cycle costs.
n
Patented safety interlock system on covers.
Offers
additional safety for home or high traffic applications.
n
Full line of fittings and accessories.
Fittings snap
onto base and overlap to cover seams for quick and
easy installation.
n
Eight-foot lengths.
Easy installation by one person with
fewer joints to cover. Custom lengths are also available.
Consult factory for more information.
n
Low-profile design.
Raceway can be installed as architec-
tural molding to eliminate the need for additional finish work.
Access 5000 Series
Raceway can be
installed as base-
board, chair rail or
crown molding.
n
Aesthetic finish options.
Variety of PVC and wood veneer
finishes enhance any decor.
n
Durable PVC material.
Lightweight and easy to cut and
install. Meets UL flammability requirements and is UL Listed
and CSA Approved for up to 600 volts.
n
Datacom connectivity options.
Accepts industry
standard and proprietary devices from a wide range of
manufacturers to provide a seamless and aesthetically
pleasing interface for voice, data, audio, and video
applications at the point of use.
n
UL and cUL Listed component raceways.
File E90378
Guide RJTX, Fittings: File E90377 Guide RJYT. Meets
Article 386 of NEC and meets Section 12-600 of CEC.
ED285R9 – Updated January 2016 – For latest specs visit www.legrand.us/wiremold
Access 5000 Series Raceway System Layout
NOTE: Illustration is for showing product applications only.
D
E
A
B
C
F
G
Back Feed Position
A–
B–
C–
D–
5010A
5007C-2A
2A
5017B, 5017C
Entrance End Feed
Deep Device Bracket
Activate Connectivity Insert
Internal Base Elbow,
Internal Cover Elbow
E–
F–
G–
H–
5007C-1A
5010R
5010L
5018B, 5018C
Device Bracket
Right End Cap
Left End Cap
External Base Elbow,
External Cover Elbow
H
Download this product’s PEP ecopasport
®
environmental product declaration at
www.legrand.us/resources-and-downloads.
This declaration conforms with ISO 14025 and
14040 and is in alignment with EN 15804.
Access Raceway
in standard white
vinyl and maple
wood veneer, also
available in black,
gray vinyl, and
fine oak wood
veneer finishes.
Access 5000 Series Raceway Base & Cover
Catalog No./Item
5000B
5"
(127mm)
Description/Specifications
Base
– Integral divider forms
two channels for power and
low-voltage separation. Base
supplied in 8' (240m) lengths.
Access Raceway's
Base, Cover, and
Trim Cover are
sold separately.
5000C*
†
Cover
– Covers supplied
in 8' (240m) lengths.
5 1/4"
(133mm)
5000T*
†
Quarter Round Trim
–
Trim covers supplied in
8' (240m) lengths.
* Add suffix “WH” for white, “BK” for black, “GY” for gray,
“W” for maple finish, and “OA” for oak finish.
2
Access 5000 Series Raceway Fittings
Catalog No./Item
5005*
1 1/2"
(38mm)
Description/Specifications
Low-Voltage Blank Plate
–
Covers entire low-voltage
recess in device plate.
Catalog No./Item
5006A
4 19/32"
(117mm)
Description/Specifications
Internal Wire Guard
– Protects
wire and cables from gap behind
butted sections of 5000C Raceway
Cover. Installed when the 5006
Cover Clips are not used.
1 1/2"
(38mm)
4 7/32"
(107mm)
23/32"
(18.3mm)
5007C
1 1/8"
(29mm)
Device Bracket
– Mounts
standard devices. Snaps into
top section of base wherever
an outlet is needed.
3 11/16"
(99mm)
2"
(51mm)
5010A*
5007C-1A*
9/16"
(14.3mm)
6 3/8"
(162mm)
5 3/16"
(132mm)
External Device Cover Plate
–
Mounts one standard device and
up to two voice/data connectors.
Accepts 5507 Series Faceplates
and Pass & Seymour
®
Activate
Keystone Jacks and Inserts.
3 9/16"
(90mm)
Entrance End Fitting
– Connects
1/2" or 3/4" conduit to Access
5000 Series Raceway. Has one
concentric 1/2" or 3/4" KO
for each channel.
•
5 1/16"
(129mm)
Overall Assembled
Depth is
1 15/16" (49mm)
5010R*
5007C-2AB*
9/16"
(14.3mm)
5 3/16"
(132mm)
Deep Device Plate
– Mounts
deeper devices such as surge
protection, GFCI devices, and
Pass & Seymour
®
Activate
communications inserts. Accepts
5507 Series Faceplates, 2A size
Activate inserts, and Wiremold
CM2 Series Open System
Communication Modules.
Right End Cap
– Closes off open
right end of run of 5000B Access
5000 Series Raceway Base.
5 29/32"
(150mm)
1 3/16"
(30mm)
5/16"
(7.9mm)
5010L*
5/16"
15/16"
(23.8mm)
(7.9mm)
Left End Cap
– Closes off open
left end of run of 5000B Access
5000 Series Raceway Base.
5 29/32"
(150mm)
5007C-2RT*
9/16"
(14.3mm)
5 3/16"
(132mm)
Deep Device Plate
– Mounts
deeper devices such as surge
protection, GFCI devices and
Ortronics
®
communications
inserts. Accepts 5507 Series
Faceplates, Ortronics
®
Tracjack
and Series II Inserts.
1 3/16"
(30mm)
5017B
1 5/16"
(33mm)
•
15/16"
(23.8mm)
Internal Base Elbow
– Mounts
sections of 5000B Access 5000
Series Raceway Base at 90°
internal corners.
5 5/16"
(129mm)
2 13/16"
(71mm)
5001
Base Coupling
– Aligns
base sections of Access 5000
Series Raceway.
5017C*
2 21/32"
(67mm)
4 9/16"
(116mm)
•
Internal Cover Elbow
– Mounts
sections of 5000C Cover and 5000T
Raceway Quarter Round Trim at 90°
internal corners.
5006*
5 13/32"
(137mm)
Cover Clip
– Covers seam
between butted sections of
5000C Raceway Cover.
1 5/8"
(41mm)
5 5/16"
(129mm)
3/4"
(19.1mm)
* Add suffix “WH” for white, “BK” for black, and “GY” for gray finish.
3
Access 5000 Series Raceway Fittings
(continued)
Catalog No./Item
5017WG
Description/Specifications
Internal Elbow Wire Guard
–
Protects wiring at mitered internal
cover; snaps into 5017B Internal
Base Elbow. Not needed when
5017C Internal Cover Elbow is used.
Catalog No./Item
5018WG
Description/Specifications
External Elbow Wire Guard
–
Installs at a mitered external elbow
joint behind the covers to protect
from sharp objects being
inserted. Not needed when
5018C external cover elbow
is used.
4 3/4"
(121mm)
4 3/16"
(106mm)
1 1/2"
(38mm)
5018B
1"
(35mm)
••
7/8"
(22.2mm)
External Base Elbow
–
For mounting 5000B Raceway Base
at 90° external corners.
2700WC
2800WC
2900WC
2700WC
Wire Clips
– Holds and
secures wiring and cabling
inside raceway. Mounts with
adhesive backing.
5 1/16"
(129mm)
5018C*
11/16"
(17.5mm)
5 1/4"
(133mm)
2 1/2"
(64mm)
External Cover Elbow
–
For mounting 5000C Raceway
Cover and 5000T Quarter Round
Trim at 90° external corners.
1 1/2"
(38mm)
2800WC
3/4"
(19.1mm)
2900WC
1 1/2"
(38mm)
1"
(35mm)
1 1/2"
(38mm)
1 1/2"
(38mm)
* Add suffix “WH” for white finish, “BK” for black, and “GY” for gray.
A full line of molded fittings are available.
4
55507 Series Face Plates
Catalog No./Item
55007AD
Description/Specifications
Modular Furniture Adapter
–
Mounts Activate modular
furniture bezel, and other
modular furniture adapters.
Catalog No./Item
5507RJ
Description/Specifications
Dual RJ11/RJ45 Connector
Faceplate
– Mounts one or two
RJ Keystone type connectors.
Has one opening and a
KO for the other.
Switch Faceplate
– Covers
standard toggle switches.
5507B
Blank Faceplate
– Covers
unused compartments in the
device bracket.
5507SW
5507D
Duplex Faceplate
– Covers
duplex style devices. Accepts
106 Frame.
5507T1
Single Receptacle Faceplate
–
Covers single receptacles –
1.59"(40mm) diameter.
5507R
Rectangular Faceplate
–
Covers rectangular
style devices.
5507T2
Single Receptacle Faceplate
–
Covers single receptacles –
1.41" (35mm) diameter.
5507FRJ
Flush Dual RJ11/ RJ45
Faceplate
– Flush mounts
one or two RJ keystone type
connectors. Has one opening
and a KO for the other.
NOTE: All faceplates are 4 1/4" x 1 7/8" (108mm x 47mm). Add suffix
“WH” for white finish, “BK” for black, and “GY” for gray.
Adding or relocating an outlet is easy with Access 5000 Raceway.
Wire clips support cables without obstructing access to wiring.
5
京公网安备 11010802033920号
EEWORLD
