Document Revision History for Intel MAX 10 FPGA Device Datasheet........................................................................................ 66
Intel
®
MAX
®
10 FPGA Device Datasheet
2
M10-DATASHEET | 2017.12.15
Intel
®
MAX
®
10 FPGA Device Datasheet
This datasheet describes the electrical characteristics, switching characteristics, configuration specifications, and timing for
Intel MAX
®
10 devices.
Table 1.
Intel MAX 10 Device Grades and Speed Grades Supported
Device Grade
Commercial
•
•
•
•
•
•
–C7
–C8 (slowest)
–I6 (fastest)
–I7
–A6
–A7
Speed Grade Supported
Industrial
Automotive
Note:
The –I6 and –A6 speed grades of the Intel MAX 10 FPGA devices are not available by default in the Intel Quartus
®
Prime
software. Contact your local Intel sales representatives for support.
Related Links
Device Ordering Information, Intel MAX 10 FPGA Device Overview
Provides more information about the densities and packages of devices in the Intel MAX 10.
Electrical Characteristics
The following sections describe the operating conditions and power consumption of Intel MAX 10 devices.
Intel Corporation. All rights reserved. Intel, the Intel logo, Altera, Arria, Cyclone, Enpirion, MAX, Nios, Quartus and Stratix words and logos are trademarks of Intel
Corporation or its subsidiaries in the U.S. and/or other countries. Intel warrants performance of its FPGA and semiconductor products to current specifications in
accordance with Intel's standard warranty, but reserves the right to make changes to any products and services at any time without notice. Intel assumes no
responsibility or liability arising out of the application or use of any information, product, or service described herein except as expressly agreed to in writing by
Intel. Intel customers are advised to obtain the latest version of device specifications before relying on any published information and before placing orders for
products or services.
*Other names and brands may be claimed as the property of others.
ISO
9001:2008
Registered
Intel
®
MAX
®
10 FPGA Device Datasheet
M10-DATASHEET | 2017.12.15
Operating Conditions
Intel MAX 10 devices are rated according to a set of defined parameters. To maintain the highest possible performance and
reliability of the Intel MAX 10 devices, you must consider the operating requirements described in this section.
Absolute Maximum Ratings
This section defines the maximum operating conditions for Intel MAX 10 devices. The values are based on experiments
conducted with the devices and theoretical modeling of breakdown and damage mechanisms. The functional operation of the
device is not implied for these conditions.
Caution:
Conditions outside the range listed in the absolute maximum ratings tables may cause permanent damage to the device.
Additionally, device operation at the absolute maximum ratings for extended periods of time may have adverse effects on the
device.
Single Supply Devices Absolute Maximum Ratings
Table 2.
Absolute Maximum Ratings for Intel MAX 10 Single Supply Devices
Symbol
V
CC_ONE
V
CCIO
V
CCA
Parameter
Supply voltage for core and periphery through on-die voltage
regulator
Supply voltage for input and output buffers
Supply voltage for phase-locked loop (PLL) regulator and analog-to-
digital converter (ADC) block (analog)
Min
–0.5
–0.5
–0.5
Max
3.9
3.9
3.9
Unit
V
V
V
Dual Supply Devices Absolute Maximum Ratings
Table 3.
Absolute Maximum Ratings for Intel MAX 10 Dual Supply Devices
Symbol
V
CC
V
CCIO
V
CCA
Parameter
Supply voltage for core and periphery
Supply voltage for input and output buffers
Supply voltage for PLL regulator (analog)
Min
–0.5
–0.5
–0.5
Max
1.63
3.9
3.41
Unit
V
V
V
continued...
Intel
®
MAX
®
10 FPGA Device Datasheet
4
Intel
®
MAX
®
10 FPGA Device Datasheet
M10-DATASHEET | 2017.12.15
Symbol
V
CCD_PLL
V
CCA_ADC
V
CCINT
Parameter
Supply voltage for PLL regulator (digital)
Supply voltage for ADC analog block
Supply voltage for ADC digital block
Min
–0.5
–0.5
–0.5
Max
1.63
3.41
1.63
Unit
V
V
V
Absolute Maximum Ratings
Table 4.
Absolute Maximum Ratings for Intel MAX 10 Devices
Symbol
V
I
I
OUT
T
STG
T
J
DC input voltage
DC output current per pin
Storage temperature
Operating junction temperature
Parameter
Min
–0.5
–25
–65
–40
Max
4.12
25
150
125
Unit
V
mA
°C
°C
Maximum Allowed Overshoot During Transitions over a 11.4-Year Time Frame
During transitions, input signals may overshoot to the voltage listed in the following table and undershoot to –2.0 V for input
currents less than 100 mA and periods shorter than 20 ns.
The maximum allowed overshoot duration is specified as a percentage of high time over the lifetime of the device. A DC signal
is equivalent to 100% duty cycle.
For example, a signal that overshoots to 4.17 V can only be at 4.17 V for ~11.7% over the lifetime of the device; for a device
lifetime of 11.4 years, this amounts to 1.33 years.
Table 5.
Maximum Allowed Overshoot During Transitions over a 11.4-Year Time Frame for Intel MAX 10 Devices
I saw this on Weibo. I don't know if it's true. Why do you always remind me to use up all the battery and then overcharge it when I buy a laptop or a mobile phone? A well-known foreign technology webs...
[p=26, null, left][color=rgb(79, 79, 79)][font="]1. TTL The main type of TTL integrated circuit is transistor-transistor logic gate. Most TTL circuits use a 5V power supply. 1. Output high level Uoh a...
For every circuit designer, power supply is basically a problem that will be encountered 100%, especially in designs that are mainly embedded. For many weak current designers, the knowledge of power e...
1. IntroductionThe crane speed regulation technology has a long history of development, from DC speed regulation to AC speed regulation, from AC stator speed regulation technology to DC thyristor spee...
[flash]http://player.youku.com/player.php/sid/XMjg0MzA0NDI4/v.swf[/flash]This video shows how to boot the OMAP-L138 Linux BSP (Board Support Package) and run an executable file with it....
0 Introduction
With the development of my country's economy, the number of motor vehicles continues to increase. The growth of existing roads and other hardware facilities can no longer meet t...[Details]
This paper designs a dot matrix LED text display screen that is easy to update, expandable, and low-cost. The way to reduce costs is
① Use the Bluetooth data transmission function of mobile ph...[Details]
I. Introduction
In the field of power conversion, isolated converters (forward, flyback, and double-ended) with low output DC voltage all use MOSFET as the rectifier device. Since these devi...[Details]
Battery life is critical for portable applications. For applications such as smoke detectors, security devices, and thermostats, factory-installed batteries need to last for more than 10 years. The...[Details]
PV inverter manufacturer SMA has launched its first DC arc fault circuit interrupter (AFCI) PV inverter and has received UL certification.
The new SunnyBoy AFCI inverter models include 3000-US...[Details]
1 Introduction
In recent years, there have been many major advances in the production technology and processes of automotive headlights, which have greatly improved the performance of automoti...[Details]
Smart lighting control systems provide high controllability for various buildings and further enhance the level of green energy. They are the core products of energy conservation and digital techn...[Details]
With the continuous consumption of earth's energy and the scarcity of resources, the harm of greenhouse effect to human beings, and the serious pollution of the atmosphere to the earth, the intern...[Details]
The traditional display screen using 51 single-chip microcomputer to control LED dot matrix has relatively simple functions. If it is to achieve diversified functions, it often takes a lot of time ...[Details]
Different initialization between C8051F and 80C51 series microcontrollers
In the past 30 years, major electronic component manufacturers in the world have launched their own unique single-chip...[Details]
FPGAs are used in 81% of electronic systems, including many commercial and defense products, and most FPGAs use BGA packaging. The BGA packaging is characterized by small solder balls and small sol...[Details]
Spatial Division Multiplexing (SDM) MIMO processing can significantly improve spectrum efficiency and thus greatly increase the capacity of wireless communication systems. Spatial Division Multip...[Details]
LED light sources have many environmental advantages, but early products still have certain technical bottlenecks in heat dissipation and high brightness design that cannot be broken through....[Details]
0 Introduction
Ultrasonic waves
are mechanical waves with a frequency of more than 20KHz, and the propagation speed in the air is about 340 m/s (at 20°C). Ultrasonic waves can be gene...[Details]
Key Points
1. Now, in addition to high-end smartphones and tablets, users also expect to use touch screens in other applications, and they are gradually appearing in cars and instruments.
...[Details]
Talking
京公网安备 11010802033920号
EEWORLD
