R1180x SERIES
150mA LDO REGULATOR
NO.EA-105-111027
OUTLINE
The R1180x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, and low ON-resistance. Each of these ICs consists of a voltage reference unit, an error amplifier,
resistor-net for voltage setting, a current limit circuit which prevents the destruction by excess current, and so on.
The output voltage of these ICs is fixed with high accuracy. B version has a chip enable pin, therefore ultra-low
consumption current standby mode can be realized with the pin.
Since the packages for these ICs are SOT-23-5 (R1180N Series), SC-82AB (R1180Q Series), and SON1612-6
(R1180D Series), therefore high density mounting of the ICs on boards is possible.
FEATURES
•
Supply Current ......................................................... Typ. 1μA
(Except the current through CE pull-down circuit)
•
Standby Mode .......................................................... Typ. 0.1μA
•
Dropout Voltage ....................................................... Typ. 0.25V (I
OUT
=150mA
3.0V Output type)
•
Temperature-Drift Coefficient of Output Voltage ...... Typ.
±100ppm/°C
•
Line Regulation ........................................................ Typ. 0.05%/V
•
Output Voltage Accuracy..........................................
±2.0%
•
Packages ................................................................ SON1612-6, SC-82AB, SOT-23-5
•
Output Voltage Range.............................................. 1.2V to 3.6V (0.1V steps)
(
For other voltages, please refer to MARK INFORMATIONS.)
•
Built-in Fold Back Protection Circuit ........................ Typ. 40mA (Current at short mode)
•
Ceramic capacitors are recommended to be used with this IC .....0.1μF
APPLICATIONS
•
Stable voltage reference.
•
Power source for electrical appliances such as cameras, VCRs and camcorders.
•
Power source for battery-powered equipment.
1
R1180x
BLOCK DIAGRAMS
R1180xxx1B
R1180xxx1C
V
DD
V
OUT
V
DD
V
OUT
Vref
Vref
Current Limit
Current Limit
CE
GND
GND
SELECTION GUIDE
The output voltage, CE pin polarity, package, etc. for the ICs can be selected at the user’s request.
Product Name
R1180Dxx1∗-TR-FE
R1180Qxx1∗-TR-FE
R1180Nxx1∗-TR-FE
Package
SON1612-6
SC-82AB
SOT-23-5
Quantity per Reel
4,000 pcs
3,000 pcs
3,000 pcs
Pb Free
Yes
Yes
Yes
Halogen Free
Yes
Yes
Yes
xx : The output voltage can be designated in the range from 1.2V(12) to 3.6V(36) in 0.1V steps.
(For other voltages, please refer to MARK INFORMATIONS.)
∗
: CE pin polarity are options as follows.
(B) "H" Active
(C) without CE pin
2
R1180x
ABSOLUTE MAXIMUM RATINGS
Symbol
V
IN
V
CE
V
OUT
I
OUT
P
D
Input Voltage
Input Voltage (CE Pin)
Output Voltage
Output Current
Power Dissipation (SON1612-6)*
Power Dissipation (SC-82AB)*
Power Dissipation (SOT-23-5)*
Topt
Tstg
Operating Temperature Range
Storage Temperature Range
Item
Rating
6.5
6.5
−0.3
to V
IN
+0.3
180
500
380
420
−40
to 85
−55
to 125
°C
°C
mW
Unit
V
V
V
mA
∗)
For Power Dissipation, please refer to PACKAGE INFORMATION.
ABSOLUTE MAXIMUM RATINGS
Electronic and mechanical stress momentarily exceeded absolute maximum ratings may cause the
permanent damages and may degrade the life time and safety for both device and system using the device
in the field.
The functional operation at or over these absolute maximum ratings is not assured.
RECOMMENDED OPERATING CONDITIONS (ELECTRICAL CHARACTERISTICS)
All of electronic equipment should be designed that the mounted semiconductor devices operate within the
recommended operating conditions. The semiconductor devices cannot operate normally over the
recommended operating conditions, even if when they are used over such conditions by momentary
electronic noise or surge. And the semiconductor devices may receive serious damage when they continue
to operate over the recommended operating conditions.
4
京公网安备 11010802033920号
EEWORLD
