R&E International
A Subsidiary of Microchip Technology Inc.
RE46C104
Piezoelectric Horn Driver and Voltage Converter
Product Specification
General Description
The RE46C104 is a piezoelectric horn driver with
voltage converter to provide maximum audibility in
low voltage applications. The feedback control pin is
designed for use with self-oscillating piezoelectric
horn but can also be used in direct drive
applications. The built-in charge pump voltage
converter provides increased supply voltage for the
horn drivers allowing outputs to swing from Vss to 2
x Vdd. A charge pump enable pin is provided to
minimize supply current when not in use.
Features
•
•
•
•
Low Quiescent Current
Low Driver Ron
Wide Operating Voltage Range
Available in Standard Packaging or RoHS
Compliant Pb Free Packaging
Pin Configuration
N/C
FEED
CAP-
Vss
CAP+
HRNEN
N/C
Applications
Smoke detectors
CO Detectors
Personal Security Products
Electronic Toys
1
14
N/C
Vdd
CPMPEN
HORNS
HORNB
VPOS
N/C
Absolute maximum ratings
Supply Voltage Vdd ........………………………………….......-.5V to +9.0V
Input voltage Range Vin ...…………………………………..... -.3V to VDD+.3V, except FEED
FEED Input Voltage Range Vinf …………………………...… -10V to +22V
Input Current Iin ..............…………………………………..... 10mA, except FEED
Operating Temperature .......………………………………….. 0 to 50°C
Continuous Output Current (HornS, HornB, or Vpos)…..….. 30mA
Stresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are
stress ratings only and operation at these conditions for extended periods may affect device reliability.
This product utilizes CMOS technology with static protection; however proper ESD prevention procedures should be
used when handling this product. Damage can occur when exposed to extremely high static electrical charges
© 2009 Microchip Technology Inc.
DS22164A-page 1
RE46C104
Piezoelectric Horn Driver and Voltage Converter
Product Specification
R&E International
A Subsidiary of Microchip Technology Inc.
Trademarks
Information contained in this publication regarding device
applications and the like is provided only for your convenience and
may be superseded by updates. It is your responsibility to ensure
that your application meets with your specifications. MICROCHIP
MAKES NO REPRESENTATIONS OR WARRANTIES OF ANY
KIND WHETHER EXPRESS OR IMPLIED, WRITTEN OR ORAL,
STATUTORY OR OTHERWISE,
RELATED
TO
THE
INFORMATION, INCLUDING BUT NOT LIMITED TO ITS
CONDITION, QUALITY, PERFORMANCE, MERCHANTABILITY
OR FITNESS FOR PURPOSE
.
Microchip disclaims all liability
arising from this information and its use. Use of Microchip devices in
life support and/or safety applications is entirely at the buyer’s risk,
and the buyer agrees to defend, indemnify and hold harmless
Microchip from any and all damages, claims, suits, or expenses
resulting from such use. No licenses are conveyed, implicitly or
otherwise, under any Microchip intellectual property rights.
The Microchip name and logo, the Microchip logo, Accuron,
dsPIC, K
EE
L
OQ
, K
EE
L
OQ
logo, MPLAB, PIC, PICmicro,
PICSTART, rfPIC, SmartShunt and UNI/O are registered
trademarks of Microchip Technology Incorporated in the U.S.A.
and other countries.
FilterLab, Hampshire, Linear Active Thermistor, MXDEV, MXLAB,
SEEVAL, SmartSensor and The Embedded Control Solutions
Company are registered trademarks of Microchip Technology
Incorporated in the U.S.A.
Analog-for-the-Digital Age, Application Maestro, CodeGuard,
dsPICDEM, dsPICDEM.net, dsPICworks, dsSPEAK, ECAN,
ECONOMONITOR, FanSense, In-Circuit Serial Programming,
ICSP, ICEPIC, Mindi, MiWi, MPASM, MPLAB Certified logo,
MPLIB, MPLINK, mTouch, nanoWatt XLP, PICkit, PICDEM,
32
logo, PowerCal, PowerInfo,
PICDEM.net, PICtail, PIC
PowerMate, PowerTool, REAL ICE, rfLAB, Select Mode, Total
Endurance, TSHARC, WiperLock and ZENA are trademarks of
Microchip Technology Incorporated in the U.S.A. and other
countries.
SQTP is a service mark of Microchip Technology Incorporated in
the U.S.A.
All other trademarks mentioned herein are property of their
respective companies.
© 2009, Microchip Technology Incorporated, Printed in the
U.S.A., All Rights Reserved.
Printed on recycled paper.
Microchip received ISO/TS-16949:2002 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California and
India. The Company’s quality system processes and procedures are for its
PIC
®
MCUs and dsPIC
®
DSCs, K
EE
L
OQ
®
code hopping devices, Serial
EEPROMs, microperipherals, nonvolatile memory and analog products. In
addition, Microchip’s quality system for the design and manufacture of
development systems is ISO 9001:2000 certified.
© 2009 Microchip Technology Inc.
DS22164A-page 5
Power technology
京公网安备 11010802033920号
EEWORLD
