Power entry modules with line filter
Felcom 54
www.schurter.com/pg06
Standard- or Medical-Filter
Inlet filter, modular assembling
5411.XX5X.XXX
Appliance inlet
Fuseholder
Line filter
5431.X05X.XXX
Appliance inlet
Appliance outlet
Switch
Line filter
C14
70° C
- Panel Mount:
Snap-In Version from front side
- 2 - 5 Functions:
Inlet Protection class I, Outlet, Line switch 2-pole, Fuseholder for fuse-
links 5 x 20 mm 1- or 2-pole, Line filter in standard and medical ver-
sion
- Solder terminals 3.5 x 0.8 mm or quick connect terminals 6.3 x 0.8
mm
- Alternative: version without line filter Felcom 64
Description
Characteristics
- Modular component selection
- Individual components soldered on a printed circuit board
- Plug removal necessary for fuse-link replacement
Fuse drawer meets requirements of medical standard IEC/EN 60601-1
The fuseholder is accessible from the equipment front
- Technical data of filter-components see blockfilter type 5500
- Fully insulated from the rear
- Qualified for use in equipment according IEC/EN 60950
Other versions on request
References
Weblinks
General Product Information
Approvals
- Line switch with other rocker marking
- VDE License Number: 101307
- UL License Number: E72928
Approvals, RoHS, CHINA-RoHS, e-Store, SCHURTER-Stock-Check,
Distributor-Stock-Check
Technical Data
Ratings IEC
Ratings UL/CSA
Leakage Current
Dielectric Strength
1 - 6 A @ Ta 40 °C / 250 VAC; Hz 50
1 - 6 A @ Ta 40 °C / 125 VAC; 60 Hz
standard < 0.5 mA (250 V / 60 Hz)
medical < 5 µA (250 V / 60 Hz)
> 1.7 kVDC between L-N
> 2.7 kVDC between L/N-PE
Test voltage (2 sec)
-25 °C to 85 °C
25/085/21 acc. to IEC 60068-1
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class I acc. to IEC 61140
Solder terminals 3.5 x 0.8 mm or quick
connect terminals 6.3 x 0.8 mm
Snap-in: 1/1.2/1.5/2/2.5/3 mm
Thermoplastic, black, UL 94V-0
Appliance-Inlet /-Outlet
C14 acc. to IEC/EN 60320-1,
F acc. to IEC/EN 60320-2-2,
UL 498, CSA C22.2 no. 42 (for cold
condition) pin-temperature 70 °C, 10 A,
Protection class I
1 or 2 pole, Shocksafe category PC2
acc. to IEC 60127-6,
for fuse-links 5 x 20 mm
5 x 20: 2 W (1 pole)/ 1.6 W (2-pole) per
pole
Admissible power acceptance at hig-
her ambient temperature see derating
curves
Rocker switch 2-pole, non-illuminated,
acc. to IEC 61058-1
Technical details
Standard Version, IEC 60939, IEC
60601-1, UL 1283, UL 544, EN 133
200, CSA C22.2 no. 8
Technical details
> 1'400'000 h acc. to MIL-HB-217 F
Fuseholder
Allowable Operation Temp.
Climatic Category
Degree of Protection
Protection Class
Terminal
Panel Thickness s
Material: Housing
Rated Power Acceptance @
Ta 23 °C
Power Acceptance @ Ta >
23°C
Line Switch
Line Filter
MTBF
EMC products
Felcom 54
www.schurter.com/pg06
Dimensions
Power entry modules with line filter
Variants 5411.XX5X.XXX
Mounting Ø: 63+0,2 x 27.6+0,2
Variants 5421.X05X.XXX
Mounting Ø: 85.9+0,2 x 27.6+0,2
Variants 5423.XX5X.XXX
Mounting Ø: 96.4+0,2 x 27.6+0,2
Variants 5424.XX5X.XXX
Mounting Ø: 87.9+0,2 x 27.6+0,2
Variants 5431.X05X.XXX
Mounting Ø: 111.1+0,2 x 27.6+0,2
Variants 5432.XX5X.XXX
Mounting Ø: 121.6+0,2 x 27.6+0,2
Technical Data of Filter-Components
Rated Current
[A]
2
4
6
6
2
4
6
6
Filter-Type
Standard Version
Standard Version
Standard Version
Standard Version
Medical Version (M5)
Medical Version (M5)
Medical Version (M5)
Medical Version (M5)
Inductances
L [mH]
2 x 4
2 x 1.6
2 x 0.7
2 x 11
2 x 4
2 x 1.6
2 x 0.7
2 x 11
Capacitance
CX [nF]
47
47
47
47
47
47
47
47
Capacitance
CY [nF]
2.2
2.2
2.2
2.2
-
-
-
-
R [MW]
-
-
-
-
1
1
1
1
EMC products
Felcom 54
www.schurter.com/pg06
Ordering instructions
Power entry modules with line filter
54 XX. X X XX. XX X
Type of line filter
1 = standard
3 = medical
“Snap-in” panel thickness
10 = 1,0 mm
12 = 1,2 mm
15 = 1,5 mm
20 = 2,0 mm
25 = 2,5 mm
30 = 3,0 mm
Connection
51 = solder terminals 3,5 x 0,8 mm
53 = quick connect terminals 6,3 x 0,8 mm
Fuseholder 5 x 20 mm
0 = without fuseholder
1 = 1-pole
2 = 2-pole
Line filter
1 = 1 Amp.
2 = 2 Amp.
4 = 4 Amp.
6 = 6 Amp.
Module combination
11 = Appliance inlet, fuseholder
21 = Appliance inlet, appliance outlet
23 = Appliance inlet, fuseholder, appliance outlet
24 = Appliance inlet, fuseholder, switch
31 = Appliance inlet, appliance outlet, switch
32 = Appliance inlet, fuseholder, appliance outlet, switch
Base model
4
The specifications, descriptions and illustrations indicated in this document are based on
EMC products
current information. All content is subject to modifications anamendments.
TI Technology Forum
京公网安备 11010802033920号
EEWORLD
