WATERPROOF
CONNECTORS
IP Rated Wire-to-Wire, Wire-to-Board
Connect with Us...Experience Makes the Difference
EDAC's waterproof Wire to Wire and Wire to Board series were designed for both extreme moisture and non-submersion
applications supporting both low-level signal and power applications up to 12A and 300V.
Major applications include automotive, commercial and recreational vehicles, outdoor lighting, appliances, marine & aftermarket
products, solar power installations, industrial equipment, process control, construction equipment, outdoor broadcast systems and
portable devices.
EDAC's waterproof series come in pitch sizes ranging from 2.0mm to 5.9mm and feature silicone rubber gaskets either pre-installed
in all-in-one plugs and receptacle housings or loose and available in a range of sizes to accomodate wire from 28AWG to 14AWG with
either thin or standard wire insulation. Operating temperature range across the whole series of -40°C to +105
°C.
Some of the unique features of EDAC's waterproof series include integral locking and double locking tabs designed to prevent accidental
disengagements, keying system to prevent mismating, circuit sizes from 1 to 9 positions and visual confirmation of proper sealing.
Application tooling available includes hand tools for prototype and small builds to fully automated presses and applicators for high production
applications. EDAC also offers the whole series in custom cables already fully assembled.
QUICK REFERENCE GUIDE
Series
560
560
566
566
567
568
572
572
Assembly Instructions
Tools
Type
Current Rating
Pitch
Wire to Wire
3A
2.5mm
Wire to Board
3A
2.5mm
Wire to Wire
2A
2.0mm
Wire to Board
2A
2.0mm
Wire to Wire
8A
5.9mm
Wire to Wire
12A
n.a.
Wire to Wire
10A
5.8mm
Wire to Wire
10A
5.8mm
Assembly instructions for 560 and 572 Series
Hand Crimp Tool, Ejection Tool and Auto-Crimp Machine
Pages
2-3
2-3
4-5
4-5
6-7
8
9-10
9-10
11-12
13
HOW TO USE THIS PRODUCT GUIDE
• Using the quick reference guide above, select the type of solution you need and proper current rating for your application and
refer to the section of the product guide with the series you have selected.
• Select the part with the appropriate number of contacts required for your application and the mating connector if required.
(Quantities shown are standard pack quantities)
• If applicable, using the Wire Seal Selection Guide in the series section, select the seal required for the wire gauge to be used in
the application.
• Contacts are supplied on the reel & bulk. See specific series section for more information on the available standard quantities.
Custom assemblies are available in all series directly from EDAC, manufactured to your
specifications. Contact EDAC or your local representative for more information.
WIRE GAUGE REFERENCE GUIDE
Gauge / AWG#
10
12
14
16
18
20
22
Sectional Area
5.2mm²
3.3mm²
2.0mm²
1.31mm²
0.83mm²
0.52mm²
0.33mm²
Gauge / AWG#
24
26
28
30
32
34
36
Sectional Area
0.21mm²
0.13mm²
0.08mm²
0.05mm²
0.03mm²
0.02mm²
0.01mm²
www.edac.net
Page 1
SERIES 560
Wire to Wire / Wire to Board 2.5mm Pitch
•
•
•
•
•
•
•
•
•
Specifications:
No. of Positions
Pitch
Rated Voltage
Rated Current
Withstanding Voltage
Contact Resistance
Insulation Resistance
Temperature Range
PCB Thickness
2, 3, 5P
2.5mm
250V
3A max
1000V AC (rms)
15 mΩ
max
1000 MΩ min./DC500V
2.5mm Pitch, Rated Current: 3A max
Fully Waterproof with Double Latch Solution
Available in Wire-to-Wire and Wire-to-Board Options
Seals Preassembled into Housing; No External Sealing
Required available in 2, 3, or 5 Positions
True Crimp and Poke Solution
Waterproofing Cap available to cover holes of wire seal
Internal Polarization to Prevent Mismating
Available with wire already installed
Waterproof Grade IP67 Certified
Crimp Contact:
Part No
565-290-731
565-290-711
Male Contact (Pin)
Ins. Dia.
AWG#
Max. Ø1.7
20-22
Max. Ø1.6
22-28
Pcs/Reel
8,000
8,000
**Crimp Contacts are also available in strips of 60pcs.
Contact EDAC for more information.
Female Contact (Socket)
Part No
AWG#
Ins. Dia.
565-290-741
20-22
Max. Ø1.7
565-290-721
22-28
Max. Ø1.6
-40°C to +105°C
1.6mm
Materials:
Crimp &
Housing
Poke
Contact
PCB
Housing
Header
Contact
Contact Plating
Wire & Housing Seals
Waterproofing Cap
PBT, UL 94V-0
Phosphor Bronze
PBT with Glass, UL 94V-0
Pcs/Reel
8,000
10,000
Brass
Tin Plating
Silicone Rubber
PBT, UL 94V-0
**Wire seals, housing seals and retainers are already
pre-assembled in the connector.
Rear Gasket (Wire Seal):
Applicable Contact
565-290-711
565-290-721
565-290-731
565-290-741
Wire O.D.
Ø1.00 to
Ø1.30
Ø1.30 to
Ø1.70
Color
Yellow
Orange
Waterproofing Cap:
Part No.
565-200-100
Ordering Code:
560-002-000-110
Assembly Layout
28.40
SERIES:
560, WIRE TO WIRE
WIRE TO BOARD
NO. OF CONTACTS:
002 - 2 CONTACTS
003 - 3 CONTACTS
005 - 5 CONTACTS
CONTACT CODE:
000 - NO CONTACTS (ONLY FOR CRIMP CONTACTS)
420 - BOARD MOUNT CONTACTS
STYLE:
101 - WHITE MALE HOUSING (ONLY FOR BOARD MOUNT CONTACTS)
301 - BLUE MALE HOUSING (ONLY FOR BOARD MOUNT CONTACTS)
110 - WHITE MALE HOUSING FOR WIRE INSULATION Ø1.00 TO Ø1.30
310 - BLUE MALE HOUSING FOR WIRE INSULATION Ø1.00 TO Ø1.30
111 - WHITE MALE HOUSING FOR WIRE INSULATION Ø1.30 TO Ø1.70
311 - BLUE MALE HOUSING FOR WIRE INSULATION Ø1.30 TO Ø1.70
210 - WHITE FEMALE HOUSING FOR WIRE INSULATION Ø1.00 TO Ø1.30
410 - BLUE FEMALE HOUSING FOR WIRE INSULATION Ø1.00 TO Ø1.30
211 - WHITE FEMALE HOUSING FOR WIRE INSULATION Ø1.30 TO Ø1.70
411 - BLUE FEMALE HOUSING FOR WIRE INSULATION Ø1.30 TO Ø1.70
Double Latch
www.edac.net
Page 2
20.85
SERIES 560
Wire to Wire / Wire to Board 2.5mm Pitch
Male Housing:
560-002-000-XXX
Female Housing:
560-002-000-XXX
PCB Header
560-002-420-XXX
560-003-000-XXX
560-003-000-XXX
560-003-420-XXX
560-005-000-XXX
560-005-000-XXX
560-005-420-XXX
Male Housing:
Ø Wire
Insulation
Ø1.00 to
Ø1.30
Ø1.30 to
Ø1.70
Housing
Color
White
Blue
White
Blue
XXX
110
310
111
311
Female Housing:
Ø Wire
Insulation
Ø1.00 to
Ø1.30
Ø1.30 to
Ø1.70
Housing
Color
White
Blue
White
Blue
XXX
210
410
211
411
PCB Header:
Housing
Color
White
Blue
XXX
101
301
Waterproofing Cap
NOTE: Waterproofing Cap is installed at the wire seal end to cover the unused holes.
Page 3
www.edac.net
SERIES 566
Wire to Wire / Wire to Board 2.0mm Pitch
•
2.0mm Pitch, Rated Current: 2A max
•
Fully Waterproof Solution available in 2, 3, 4, or 6
Positions (2 and 3 Positions Only for Wire to Board)
•
Available in Wire-to-Wire and Wire-to-Board Options
•
Seals preassembled into housing; no external sealing
required
•
True Crimp and Poke Solution
•
Waterproofing cap available to cover holes of wire seal
•
Available with wire already installed
•
Waterproof Grade IP67 Certified
Specifications:
No. of Positions
Pitch
Rated Voltage
Rated Current
Withstanding Voltage
Contact Resistance
Insulation Resistance
Temperature Range
PCB Thickness
2, 3, 4, or 6P
2.0mm
250V
2A max
1000V AC (rms)
10 mΩ
max
1000 MΩ min./DC500V
Crimp Contact:
Part No
566-290-711
Male Contact (Pin)
Ins. Dia.
AWG#
Ø1.0~Ø1.5
22-28
Pcs/Reel
12,000
**Crimp Contacts are also available in strips of 60pcs.
Contact EDAC for more information.
-40°C to +105°C
1.6mm
Materials:
Crimp &
Housing
Poke
Contact
PCB
Housing
Header
Contact
Contact Plating
Wire & Housing Seals
Waterproofing Cap
PBT, UL 94V-0
Phosphor Bronze
PBT with Glass, UL 94V-0
Female Contact (Socket)
Part No
AWG#
Ins. Dia.
566-290-721
22-28
Ø1.0~Ø1.5
**Wire seals and housing seals are already
pre-assembled in the connector.
Pcs/Reel
12,000
Brass
Tin Plating
Silicone Rubber
PBT, UL 94V-0
Rear Gasket (Wire Seal):
Applicable Contact
566-290-711
566-290-721
Wire O.D.
Ø1.00 to
Ø1.25
Ø1.25 to
Ø1.50
Color
Light Blue
Orange
Waterproofing Cap:
Part No
566-200-100
Ordering Code:
566-002-000-710
Assembly Layout
SERIES:
566, WIRE TO WIRE
WIRE TO BOARD
NO. OF CONTACTS:
002 - 2 CONTACTS
003 - 3 CONTACTS
004 - 4 CONTACTS
006 - 6 CONTACTS
CONTACT CODE:
000 - NO CONTACTS (ONLY FOR CRIMP CONTACTS)
421 - BOARD MOUNT CONTACTS (PCB) ONLY FOR
2 & 3 PIN SIZE
STYLE:
701 - BLACK MALE HOUSING (ONLY FOR BOARD MOUNT CONTACTS)
710 - BLACK MALE HOUSING FOR WIRE INSULATION Ø1.00 TO Ø1.25
711 - BLACK MALE HOUSING FOR WIRE INSULATION Ø1.25 TO Ø1.50
810 - BLACK FEMALE HOUSING FOR WIRE INSULATION Ø1.00 TO Ø1.25
811 - BLACK FEMALE HOUSING FOR WIRE INSULATION Ø1.25 TO Ø1.50
Page 1
A
PIN SIZE A (mm) LENGTH
2P, 3P, 4P
28.85
6P
29.05
Waterproofing Cap
www.edac.net
NOTE: Waterproofing Cap is installed at the wire seal end to cover the unused holes.
京公网安备 11010802033920号
EEWORLD
