spread-spectrum (dithered) square-wave output of fre-
quencies from 130kHz to 66.6MHz. The DS1087L is
shipped from the factory programmed at a specific fre-
quency and spread-spectrum percentage. The user still
has access to an internal frequency divider, selectable
2% or 4% dithered output, and programmable output
power-down/disable mode through a 2-wire program-
ming interface. All the device settings are stored in non-
volatile (NV) EEPROM allowing it to operate in
stand-alone applications. The DS1087L has power-
down and output-enable control pins for power-sensi-
tive applications.
Features
♦
Factory Programmed Square-Wave Generator
from 130kHz to 66.6MHz
♦
No External Timing Components Required
♦
EMI Reduction
♦
2.7V to 3.6V Supply
♦
User Programmable Down to 130kHz with Divider
(Dependent on Master Oscillator Frequency)
♦
2% or 4% Selectable Dithered Output
♦
Glitchless Output-Enable Control
♦
2-Wire Serial Interface
♦
Nonvolatile Settings
♦
Power-Down Mode
♦
Programmable Output Power-Down/Disable Mode
DS1087L
Applications
Printers
Copiers
PCs
Computer Peripherals
Cell Phones
Cable Modems
Ordering Information
PART
DS1087LU-yxx
TEMP RANGE
-40°C to +85°C
PIN-PACKAGE
8 µSOP (118 mils)
Standard Frequency Options
PART
DS1087LU-202
DS1087LU-402
DS1087LU-210
DS1087LU-216
DS1087LU-266
DS1087LU-466
DS1087LU-yxx
FREQUENCY (MHz)
2.0480
2.0480
10.0
16.6
66.6
66.6
Fixed up to 66.6
SPREAD (%)
2
4
2
2
2
4
2 or 4
SPRD
V
CC
2
OUT
1
Pin Configuration
TOP VIEW
8
7
SCL
SDA
PDN
OE
DS1087L
3
6
5
GND
4
Custom frequencies and over 20 standard frequencies avail-
able, contact factory.
µSOP
(118 mils)
EconOscillator is a trademark of Dallas Semiconductor.
Typical Operating Circuits appear at end of data sheet.
______________________________________________
Maxim Integrated Products
1
For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at
1-888-629-4642, or visit Maxim’s website at www.maxim-ic.com.
3.3V Spread-Spectrum EconOscillator
DS1087L
ABSOLUTE MAXIMUM RATINGS
Voltage Range on V
CC
Relative to Ground ..........-0.5V to +6.0V
Voltage Range on SPRD,
PDN,
OE, SDA, SCL
Relative to Ground* ................................-0.5V to (V
CC
+ 0.5V)
Operating Temperature Range ...........................-40°C to +85°C
*This
voltage must not exceed 6.0V.
Programming Temperature Range .........................0°C to +70°C
Storage Temperature Range .............................-55°C to +125°C
Soldering Temperature ..................See IPC/JEDEC J-STD-020A
Stresses beyond those listed under “Absolute Maximum Ratings” may cause permanent damage to the device. These are stress ratings only, and functional
operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to
absolute maximum rating conditions for extended periods may affect device reliability.
The negotiation process is the same every time. After analyzing the PPP protocol, it seems that the base station always rejects it. After that, there is no response. The print information is as follow...
When the EVC program is compiled, the executable file is automatically downloaded to the simulator. However, when my program is running, it needs to read a data file. How can I download this data file...
Failed to load flash loader:C:\Program Files (x86)\IAR systems\Embedded Workbench 8.0\arm\config\flashloader\NXP\FlashK60Fxxx128K.flash?? Does anyone know how to configure it? The chip used is MK60FX5...
I am developing wince5.0 on my company's development board. I modified everything based on the 2443 development package and it is running. However, after adding a breakpoint after pause, it will not s...
Abstract:
With the increasing complexity of smart vehicle electrical and electronic architectures, the full lifecycle management of vehicle electronic control components faces multiple challe...[Details]
To understand why car engines need gearboxes, we must first understand the characteristics of different types of engines. An engine refers to a machine that can convert a form of energy into kineti...[Details]
On August 25th, TSMC, the world's leading contract chip manufacturer, attracted significant attention for its decision to build a chip manufacturing facility in Arizona. TSMC primarily manufactures...[Details]
Robotics
has become
LiDAR
's "second growth curve."
While LiDAR was still battling with its "pure vision" rivals in the automotive field, another field ignited the demand f...[Details]
The all-new MG4 was recently officially announced on the Ministry of Industry and Information Technology's (MIIT) new vehicle announcement. The all-new MG4's semi-solid-state battery version addres...[Details]
Electric vehicles are becoming increasingly popular, with increasingly longer ranges. There are two ways to charge electric vehicles: slow charging and fast charging. Which is the most suitable? Sl...[Details]
On August 21st, BYD announced the launch of its next-generation "Little White Pile" product, the "Lingchong"
charging
pile
, which is now available for general sale. This charging pile feat...[Details]
MQTT Ethernet I/O modules primarily collect I/O port information and transmit data over the network. In addition to being a TCP server, Ethernet I/O modules can also function as TCP clients. Furthe...[Details]
The driving mode is not unfamiliar to vehicles. According to the driving mode of the vehicle, there are front-wheel drive, rear-wheel drive and even four-wheel drive. Four-wheel drive is a major se...[Details]
Consumer demand for premium listening experiences has driven rapid evolution in the wireless headphone market in recent years. Hybrid designs, which utilize two drivers per earbud to enhance sound ...[Details]
1. Introduction
In 2015, Apple's new MacBook and Apple Watch both featured force-sensing technology, which Apple calls Force Touch. Each time a user presses the touchpad, the device not only p...[Details]
On August 20, Huawei Device announced that the all-new M7 is the first to feature an in-cabin laser vision solution. This solution offers enhanced active safety capabilities compared to primary vis...[Details]
With the continuous development of ultrasonic technology, ultrasound has been widely used in fields such as inspection, cleaning, welding, and medical treatment, and has even found its way into tex...[Details]
This series of articles aims to help readers have a brief understanding of the Hongke KPA Automation system and to quickly get started with MoDK, including: an introduction to Hongke KPA Automation...[Details]
Since entering the electronic components industry, I've learned that electronic components come in different packaging types. Some people have argued that different types of components may look the...[Details]
PCB Design
京公网安备 11010802033920号
EEWORLD
