Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 125A for 50 Amp or less
rating and not to exceed 175 for 51 through 100 Amp rating
Configuration Max. Frequency Phase Load Purpose With Without With Without With Without
Rating
Amps
Amps
1
Backup Backup Backup Backup Backup Backup
Fuse
Fuse
Fuse
Fuse
Fuse
Fuse
---
0.10 - 70
---
---
7,500
---
5,000 5,000 1,500
80
DC
---
71 - 100 71 - 100
---
10,000
---
5,000
---
5,000
125
DC
---
1 - 50
---
---
5,000
---
---
---
5,000
DC
---
0.10 - 50
---
---
---
5,000
0.10 - 70
3,000 1,500 3,000 1,500
Series
250
1
---
---
5,000
50 / 60
0.10 - 100
---
---
5,000 5,000
3
0.10 - 90
---
---
3,000 1,500
415
50 / 60
3
0.10 - 30
---
5,000
2
---
3,000 1,500
5,000 2,500
80
DC
---
7,500
---
5,000
Dual Coil
0.10 - 30
---
---
1,500
1,500
250
50 / 60
1&3
5,000 3,000
3,000
80
DC
---
0.10 - 70
---
---
7,500
---
5,000 5,000 1,500
250
50 / 60
1 & 3 0.10 - 70
---
---
5,000 3,000 1,500 3,000 1,500
Shunt
3,000 1,500
415
50 / 60
3
0.10 - 30
---
5,000
2
---
3,000 1,500
5,000 2,500
Voltage
Current Rating
Application
Codes
UL / CSA
TC1,2,OL1,U1
TC1,2,OL0,U1
TC1,2,OL1,U1
TC1,2,OL1,U1
---
Agency F, H, J or R
Agency J or R
2P, Agency J or R
---
Agency J or R
Construction Notes
TC1,2,OL1,C1
TC1,2,OL1,U1
TC1,2,OL1,U1
TC1,2,OL1,U1
TC1,2,OL1,C1
Rocker
Handle, Agency F, H, J or R
---
---
---
Rocker
Handle, Agency F, H, J or R
Notes:
1.
General Purpose ratings for UL/CSA only.
2.
Requires branch circuit backup with a UL LISTED Type K5 or RK5 fuse rated 15A minimum and no more than 4 times full load amps not to exceed 125A for 50 Amp or less
rating and not to exceed 175 for 51 through 100 Amp rating.
Table D:
Lists UL Listed (489), CSA Certified (C22.2 No. 5.1-M) configuration and performance capabilities as a Molded Case
I connected a 51 infrared receiver circuit, using the vs1838B iron case. After connecting the circuit according to the instructions, the test was unsuccessful. What is the difference between HS0038 an...
Simple circuit diagram 1. When the antenna receives the signal, since the signal is very weak, it needs to be amplified, which requires LNA (low noise amplifier). Then it passes through a bandpass fil...
[i=s] This post was last edited by paulhyde on 2014-9-15 03:30 [/i] How to use a microcontroller to control a motor through an ESC? Please give me the principle and code examples...
Ultrasonic tooth cleaning machines have been widely used in the medical field. Most ultrasonic tooth cleaning machines used at home and abroad now use analog oscillation circuits. There are the follow...[Details]
introduction
Mobile phones, MP3 players, hard disk players, digital cameras, PDAs and other devices are all controlled by navigation keys. Currently, the more popular navigation key contro...[Details]
introduction
Controller Area Network (CAN) is a bus standard proposed by Bosch of Germany to solve the information communication between automotive electronic control units. With its exc...[Details]
Power semiconductors and reactive components (capacitors and inductors) are ubiquitous in today's electrical equipment. In normal operation, they can cause two undesirable side effects on the AC line ...[Details]
1. Introduction
The balance ability
of human beings
is the basis for people to carry out various sports. People need
balance ability
to stand, sit, lie down and walk
. Once
...[Details]
Most blood glucose meter implementations include some consumables such as test strips or chemical reagents, and the key to the operation of such equipment is to ensure that these test strips are re...[Details]
With the development of LED technology, the application of LED has expanded from the traditional low-power portable product backlight to medium- and high-power indoor lighting, outdoor lighting, an...[Details]
0 Introduction
With the release of the "Elevator Supervision and Inspection Regulations", new requirements have been put forward for the inspection quality of elevators by inspection agenc...[Details]
O Introduction
Semiconductor laser (LD) is a solid light source. It has been widely used due to its advantages such as good monochromaticity, small size, light weight, low price and low po...[Details]
Historically, GPS receiver designers have combined simulation and drive testing to determine receiver performance in complex environments. While GPS signal simulation provides a repeatable signal s...[Details]
1 Introduction
The research is about a basic human parameter tester that can measure parameters such as body temperature, pulse and breathing interval. These parameters and records are the...[Details]
0 Introduction
A manipulator is a mechatronic automatic device that can simulate human arm movements and replace human hands to grasp, move workpieces or operate tools according to set pro...[Details]
Ultrasonic tooth cleaning machines have been widely used in the medical field. Most ultrasonic tooth cleaning machines used at home and abroad now use analog oscillation circuits. There are the fol...[Details]
introduction:
With the development of power electronics, the application scope of inverter control technology and industrial field bus is becoming wider and wider. This system successfully...[Details]
0 Introduction
In the field of digital signal processing, filters are undoubtedly a very important link. Among digital filters, finite impulse response (FIR) filters are particularly widely us...[Details]
51mcu
京公网安备 11010802033920号
EEWORLD
