ALPHA WIRE COMPANY
CUSTOMER PRODUCT SPECIFICATION
Part Numbers: 3590/9 – 3590/64
Spec Number: C3590-9
Page 1 of 3 Pages
A. Construction
1) Conductor
a) Material
b) AWG, Stranding
2) Insulation
a) Material
b) Nominal Wall Thickness
c) Diameter
d) Color
3) Shield
a) Material
b) Overlap
c) Drain Wire
4) Assembly
a) Number of Conductors
b) Configuration
c) Center to Center Spacing
d) Core Width
5) Jacket
a) Material
b) Jacket Width
c) Jacket Thickness (B)
d) Min. Point Thickness
e) Color
f) Surface Print
g) Print Legend
* - Vendor Designation
Issue:
Issue Date:
Effective Date:
3
3/14/2007
5/1/2007
Tinned Copper, Per ASTM B-33
28, 7/36
Lead Free Polyvinyl Chloride, Extruded
0.010
0.035 +/- 0.002
Gray, Red Polarity Stripe on Leading Edge
Aluminum/Polyester
25%, Minimum
2 x 28 AWG (7/36) Tinned Copper
See Table 1
Flat Cable
0.050 +/- 0.002
See Table 1
Lead Free Polyvinyl Chloride, Extruded
See Table 1
0.115 +/- 0.015
0.007
Gray
Per Alpha Standard SP-001
ALPHA - * (UL) CL2 105C 28 AWG
This specification outlines the requirements for the product(s) described herein. Deviations from this specification are
not permitted
without the written authorization of the Alpha Wire Engineering Department. All finished products will be inspected to the
specification and noncompliance or unauthorized deviations will be cause for rejection and return of product.
If vendor certifying agency requirements are in conflict with this document,
it is incumbent upon the vendor to notify the Alpha
Wire Engineering Department
and mark up differences on this document and submit them for
review and approval prior to any
production.
Be advised that
product legend information and product label information must be in concert;
both are the
responsibility of the vendor.
It is the
responsibility of the vendor
to insure that this product meets the requirements of subservient certifying agency documents
even though they are not directly noted herein.
All information contained herein is confidential. It’s use is restricted to authorized Alpha Wire Company personnel or authorized
vendors of the Alpha Wire Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed
with unauthorized personnel without the expressed written consent of the Alpha Wire Engineering Department.
ALPHA WIRE COMPANY
CUSTOMER PRODUCT SPECIFICATION
Part Numbers: 3590/9 – 3590/64
Spec Number: C3590-9
Page 2 of 3 Pages
Table 1
Part Number
3590/9
3590/10
3590/14
3590/15
3590/16
3590/20
3590/24
3590/25
3590/26
3590/34
3590/37
3590/40
3590/50
3590/60
Conductors
9
10
14
15
16
20
24
25
26
34
37
40
50
60
Core Width (A)
0.450 +/- 0.010
0.500 +/- 0.010
0.700 +/- 0.010
0.750 +/- 0.010
0.800 +/- 0.010
1.000 +/- 0.015
1.200 +/- 0.015
1.250 +/- 0.015
1.300 +/- 0.015
1.700 +/- 0.020
1.850 +/- 0.020
2.000 +/- 0.020
2.500 +/- 0.020
3.000 +/- 0.020
Jacket Width (C)
0.520 +/- 0.020
0.570 +/- 0.020
0.770 +/- 0.020
0.820 +/- 0.020
0.870 +/- 0.020
1.070 +/- 0.030
1.270 +/- 0.030
1.320 +/- 0.030
1.370 +/- 0.030
1.770 +/-0 .035
1.950 +/- 0.035
2.070 +/- 0.035
2.570 +/- 0.035
3.070 +/- 0.035
Issue:
Issue Date:
Effective Date:
3
3/14/2007
5/1/2007
B. Industry Approvals and Ratings
1) UL
2)
3)
4)
5)
6)
7)
8)
9)
Voltage Rating
Temperature Rating
Conductor DC Resistance
Voltage Withstand
Insulation Resistance
Impedance
Capacitance
Propagation Delay
UL Standard 13, Type CL2
VW-1
150 Volts
105°C
67.5 Ohms/1000 ft @ 20C, Nominal
1500 Volts RMS, Minimum
300 Meg Ohms/1000 ft, Minimum
70 Ohms, Nominal
20 pf/ft., Nominal
1.45 ns/ft., Nominal
C. Packaging Requirements
1) Alpha Standard
2) Standard Package
D. Environmental
1) RoHS Directive 2002/95/EC
PS-004, Latest Revision
100 feet (Max. 2 of lengths, 25 ft. Min Length)
Restricted substances must not be present in these
products beyond allowable trace amounts as defined by
the RoHS directive. Certifications to this effect are to be
forwarded to the Alpha Engineering Group, Elizabeth, NJ
for (1) the first order of goods, (2) whenever material
changes are made by the vendor, or (3) whenever the
governing RoHS document is changed or modified
This specification outlines the requirements for the product(s) described herein. Deviations from this specification are
not permitted
without the written authorization of the Alpha Wire Engineering Department. All finished products will be inspected to the
specification and noncompliance or unauthorized deviations will be cause for rejection and return of product.
If vendor certifying agency requirements are in conflict with this document,
it is incumbent upon the vendor to notify the Alpha
Wire Engineering Department
and mark up differences on this document and submit them for
review and approval prior to any
production.
Be advised that
product legend information and product label information must be in concert;
both are the
responsibility of the vendor.
It is the
responsibility of the vendor
to insure that this product meets the requirements of subservient certifying agency documents
even though they are not directly noted herein.
All information contained herein is confidential. It’s use is restricted to authorized Alpha Wire Company personnel or authorized
vendors of the Alpha Wire Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed
with unauthorized personnel without the expressed written consent of the Alpha Wire Engineering Department.
ALPHA WIRE COMPANY
CUSTOMER PRODUCT SPECIFICATION
Part Numbers: 3590/9 – 3590/64
Spec Number: C3590-9
Page 3 of 3 Pages
Issue:
Issue Date:
Effective Date:
3
3/14/2007
5/1/2007
relative to restricted substances. The vendor shall
provide the levels of each restricted substance and the
method by which it was developed, i.e., calculated,
Atomic Absorption, Argon Plasma, or Acid Digestion. It is
the vendors’ responsibility to keep this information
current.
2) California Proposition 65
All materials used in the manufacture of this part must
contain no more than 300ppm of lead and meet all other
chemical requirements of California Proposition 65.
This specification outlines the requirements for the product(s) described herein. Deviations from this specification are
not permitted
without the written authorization of the Alpha Wire Engineering Department. All finished products will be inspected to the
specification and noncompliance or unauthorized deviations will be cause for rejection and return of product.
If vendor certifying agency requirements are in conflict with this document,
it is incumbent upon the vendor to notify the Alpha
Wire Engineering Department
and mark up differences on this document and submit them for
review and approval prior to any
production.
Be advised that
product legend information and product label information must be in concert;
both are the
responsibility of the vendor.
It is the
responsibility of the vendor
to insure that this product meets the requirements of subservient certifying agency documents
even though they are not directly noted herein.
All information contained herein is confidential. It’s use is restricted to authorized Alpha Wire Company personnel or authorized
vendors of the Alpha Wire Company. Under no circumstances shall this document be duplicated in any form or shown to/discussed
with unauthorized personnel without the expressed written consent of the Alpha Wire Engineering Department.
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
