5962-0255401HZC datasheet, PDF

Datasheet> All Categories > The power supply circuit> 5962-0255401HZC

5962-0255401HZC: DescriptionDC-DC Regulated Power Supply Module, 2 Output, 80W, Hybrid,; CategoryThe power supply circuit; File Size171KB，14 Pages; ManufacturerInfineon; Websitehttp://www.infineon.com/

Download Datasheet Parametric View All

5962-0255401HZC Overview

DC-DC Regulated Power Supply Module, 2 Output, 80W, Hybrid,

5962-0255401HZC Parametric

Parameter Name	Attribute value
Maker	Infineon
package instruction	, MODULE,12LEAD,2.5
Reach Compliance Code	compliant
Other features	ADDITIONAL -5V OUTPUT AVAILABLE
Analog Integrated Circuits - Other Types	DC-DC REGULATED POWER SUPPLY MODULE
Maximum input voltage	160 V
Minimum input voltage	80 V
Nominal input voltage	120 V
JESD-30 code	R-XDMA-P12
JESD-609 code	e4
Number of functions	1
Output times	2
Number of terminals	12
Maximum operating temperature	125 °C
Minimum operating temperature	-55 °C
Maximum output current	12.8 A
Maximum output voltage	5.05 V
Minimum output voltage	4.95 V
Nominal output voltage	5 V
Package body material	UNSPECIFIED
Encapsulate equivalent code	MODULE,12LEAD,2.5
Package shape	RECTANGULAR
Package form	MICROELECTRONIC ASSEMBLY
Certification status	Qualified
Filter level	MIL-PRF-38534
surface mount	NO
technology	HYBRID
Temperature level	MILITARY
Terminal surface	GOLD
Terminal form	PIN/PEG
Terminal location	DUAL
Maximum total power output	80 W
Fine-tuning/adjustable output	YES
Base Number Matches	1

Preview

Download Datasheet

View All

REVISIONS

LTR

DESCRIPTION

Update drawing to the latest requirements. -sld

Table II, add note to Group C end-point test parameters. Update

boilerplate paragraphs. -gz

Correct dimensions for symbols D, D2, and L1 for case outline U.

Correct dimensions for symbols D2, L, and L1 for case outline X.

Correct dimensions for symbols D, L, and L1 for case outline Y.

Correct dimensions for symbols D, D2, and L1 for case outline Z.

Update drawing paragraphs. -gc

DATE (YR-MO-DA)

07-07-25

09-12-02

APPROVED

Joseph Rodenbeck

Charles F. Saffle

13-01-23

Charles F. Saffle

REV

SHEET

REV

SHEET

REV STATUS

OF SHEETS

PMIC N/A

REV

SHEET

PREPARED BY

Gary Zahn

CHECKED BY

Greg Cecil

STANDARD

MICROCIRCUIT

DRAWING

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

http://www.landandmaritime.dla.mil/

THIS DRAWING IS AVAILABLE

FOR USE BY ALL

DEPARTMENTS

AND AGENCIES OF THE

DEPARTMENT OF DEFENSE

APPROVED BY

Raymond Monnin

DRAWING APPROVAL DATE

02-11-06

REVISION LEVEL

MICROCIRCUIT, HYBRID, LINEAR, 5 VOLT ,

DUAL CHANNEL, DC/DC CONVERTER

AMSC N/A

SIZE

SHEET

CAGE CODE

67268

1 OF

5962-02554

DSCC FORM 2233

APR 97

5962-E093-13

1.3 Absolute maximum ratings. 1/

Input voltage range ....................................................................

Lead temperature (soldering, 10 seconds) ................................

Storage temperature ..................................................................

1.4 Recommended operating conditions.

Input voltage range ....................................................................

Output power 2/ 3/ .....................................................................

Case operating temperature range (T

) .....................................

2. APPLICABLE DOCUMENTS

2.1 Government specification, standards, and handbooks. The following specification, standards, and handbooks form a part

of this drawing to the extent specified herein. Unless otherwise specified, the issues of these documents are those cited in the

solicitation or contract.

DEPARTMENT OF DEFENSE SPECIFICATIONS

MIL-PRF-38534 - Hybrid Microcircuits, General Specification for.

DEPARTMENT OF DEFENSE STANDARDS

MIL-STD-883 - Test Method Standard Microcircuits.

MIL-STD-1835 - Interface Standard Electronic Component Case Outlines.

+80 V dc to +160 V dc

≤

80 W

-55°C to +125°C

-0.5 V dc to +180 V dc

+300°C

-65°C to +135°C

DEPARTMENT OF DEFENSE HANDBOOKS

MIL-HDBK-103 - List of Standard Microcircuit Drawings.

MIL-HDBK-780 - Standard Microcircuit Drawings.

(Copies of these documents are available online at

https://assist.dla.mil/quicksearch/or

from the Standardization Document

Order Desk, 700 Robbins Avenue, Building 4D, Philadelphia, PA 19111-5094.)

2.2 Order of precedence. In the event of a conflict between the text of this drawing and the references cited herein, the text

of this drawing takes precedence. Nothing in this document, however, supersedes applicable laws and regulations unless a

specific exemption has been obtained.

3. REQUIREMENTS

3.1 Item requirements. The individual item performance requirements for device classes D, E, G, H, and K shall be in

accordance with MIL-PRF-38534. Compliance with MIL-PRF-38534 shall include the performance of all tests herein or as

designated in the device manufacturer's Quality Management (QM) plan or as designated for the applicable device class. The

manufacturer may eliminate, modify or optimize the tests and inspections herein, however the performance requirements as

defined in MIL-PRF-38534 shall be met for the applicable device class. In addition, the modification in the QM plan shall not

affect the form, fit, or function of the device for the applicable device class.

Stresses above the absolute maximum ratings may cause permanent damage to the device. Extended operation at the

maximum levels may degrade performance and affect reliability.

Derate output power linearly above case temperature +125°C to 0 at +135°C.

Output load must be distributed so that a minimum of 20% of the total output power is being provided by one of the outputs.

STANDARD

MICROCIRCUIT DRAWING

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

SIZE

REVISION LEVEL

5962-02554

SHEET

DSCC FORM 2234

APR 97

3.2 Design, construction, and physical dimensions. The design, construction, and physical dimensions shall be as specified

in MIL-PRF-38534 and herein.

3.2.1 Case outlines. The case outlines shall be in accordance with 1.2.4 herein and figure 1.

3.2.2 Terminal connections. The terminal connections shall be as specified on figure 2.

3.3 Electrical performance characteristics. Unless otherwise specified herein, the electrical performance characteristics are

as specified in table I and shall apply over the full specified operating temperature range.

3.4 Electrical test requirements. The electrical test requirements shall be the subgroups specified in table II. The electrical

tests for each subgroup are defined in table I.

3.5 Marking of devices. Marking of devices shall be in accordance with MIL-PRF-38534. The device shall be marked with

the PIN listed in 1.2 herein. In addition, the manufacturer's vendor similar PIN may also be marked.

3.6 Data. In addition to the general performance requirements of MIL-PRF-38534, the manufacturer of the device described

herein shall maintain the electrical test data (variables format) from the initial quality conformance inspection group A lot sample,

for each device type listed herein. Also, the data should include a summary of all parameters manually tested, and for those

which, if any, are guaranteed. This data shall be maintained under document revision level control by the manufacturer and be

made available to the preparing activity (DLA Land and Maritime-VA) upon request.

3.7 Certificate of compliance. A certificate of compliance shall be required from a manufacturer in order to supply to this

drawing. The certificate of compliance (original copy) submitted to DLA Land and Maritime-VA shall affirm that the

manufacturer's product meets the performance requirements of MIL-PRF-38534 and herein.

3.8 Certificate of conformance. A certificate of conformance as required in MIL-PRF-38534 shall be provided with each lot of

microcircuits delivered to this drawing.

4. VERIFICATION

4.1 Sampling and inspection. Sampling and inspection procedures shall be in accordance with MIL-PRF-38534 or as

modified in the device manufacturer's Quality Management (QM) plan. The modification in the QM plan shall not affect the form,

fit, or function as described herein.

4.2 Screening. Screening shall be in accordance with MIL-PRF-38534. The following additional criteria shall apply:

Burn-in test, method 1015 of MIL-STD-883.

(1)

Test condition A, B, C, or D. The test circuit shall be maintained by the manufacturer under document revision level

control and shall be made available to either DLA Land and Maritime-VA or the acquiring activity upon request.

Also, the test circuit shall specify the inputs, outputs, biases, and power dissipation, as applicable, in accordance

with the intent specified in method 1015 of MIL-STD-883.

as specified in accordance with table I of method 1015 of MIL-STD-883.

(2)

Interim and final electrical test parameters shall be as specified in table II herein, except interim electrical parameter

tests prior to burn-in are optional at the discretion of the manufacturer.

STANDARD

MICROCIRCUIT DRAWING

DLA LAND AND MARITIME

COLUMBUS, OHIO 43218-3990

SIZE

REVISION LEVEL

5962-02554

SHEET

DSCC FORM 2234

APR 97

Recommended Resources

MC34063 step-down flow expansion design schematic diagram

MC145026 (general) infrared, ultrasonic or radio frequency remote control transmission encoding circuit

SCR emergency power supply

BT1074B Monolithic 900MHz RF Transceiver

555 timer constitutes a 60Hz clock oscillation signal circuit

Floating source instrument amplifier circuit

Is there a protocol for high-speed Serdes for Scan/Bist testing?: Is there a protocol for using high-speed Serdes for Scan/Bist testing? High-speed Serdes is used for data transmission, and low-speed Scan and other DFT tests are performed inside the chip. Is there s...; luyinmofashi Test/Measurement

TR2609 with ordinary EE13 for 12V1A -12V1.2A voltage 110V-220V input: [media=x,500,375]https://v.youku.com/v_show/id_XMzk2MjMzNDc1Ng==.html?x&sharefrom=android&sharekey=9664deef460d3c444f17a1130517ea945[/media]...; 聚泓TR Power technology

Using tms320lf2407 to implement digital filtering: What are the issues that should be paid attention to when using the median average filtering method to realize digital filtering using tms320lf2407 ? ? ? Thank you. What are the issues that should be ...; fighting Analog electronics

Wince development series of problems——1: I am making a BMP viewer for wince. I have ported the source code of vc6.0 (win32 project) to vs2008 (wince project) and encountered a series of problems. Today I added some code and encountered two p...; joshua Embedded System

A passing expert talked about the control of brushless motors for reference by Xiaobai: Just say,,,...; shijizai Motor Drive Control（Motor Control）

【MicroPython】Schematics, PCB, firmware: Here are some MicroPython resources for your reference. [list] [*]Original schematics, PCB (eagle and PDF format): [url=http://micropython.org/resources/micropython-master.zip]micropython-master.zip[/...; dcexpert MicroPython Open Source section

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components