website at http://www.mot.com/SPS/PowerPC/ for the latest version of this Part Number SpeciÞcation or to your local Motorola
sales ofÞce for later and/or more detailed description of the errata.
The known errata as of the date of this document are summarized below.
#
1
Problem
Snoop causes cancelled
speculative load to corrupt
GPR/FPR.
Description
A snoop that hits to a pend-
ing but cancelled copy back
address can cause wrong
data to be loaded into a
GPR/FPR.
A snoop which causes a
copyback and occurring in a
one cycle window near every
tenth dcbi causes the dcbi to
fail to invalidate the cache.
Impact
All systems that use hard-
ware coherency along with
speculative loads.
Solutions
Set G=1 to pages loaded
from during snooping.
2
Snoop copyback causes
every tenth dcbi to fail.
Only systems using both
software and hardware
coherency simultaneously
are affected.
After each dcbi, place an
additional dcbi to the same
address.
Electrical and Thermal Characteristics
This section provides any changes to the AC and DC electrical speciÞcations and thermal characteristics for the PID6-603e parts
described herein.
DC Electrical Characteristics
The following table describes the changed thermal operating conditions for the PID6-603e part numbers described herein.
Recommended Operating Conditions
Characteristic
Junction temperature
Tj
Symbol
Value
-40 to 105
Unit
¼C
Notes
1
Note: 1. Parts with TN sufÞx only.
2
PID6-603e Part Number Specifications
PRELIMINARYÑSUBJECT TO CHANGE WITHOUT NOTICE
AC Electrical Characteristics
The AC timing speciÞcations described in the
PID6-603e Hardware SpeciÞcation
s include 100MHz, 120MHz, and 133MHz.
Motorola has discontinued the 120MHz offering for the revision described herein. Customers desiring to operate at 120MHz are
encouraged to purchase the 133MHz part. This section provides any other AC electrical characteristics that have been changed for
this revision.
Clock AC SpeciÞcations
The following table provides the revised clock AC timing speciÞcations for the parts described herein
Note that the minimum core frequency has been raised from the 16.67MHz value in the Hardware SpeciÞcation to 80MHz.
Some parts of this revision manufactured recently will not operate that slowly.
Clock AC Timing Specifications
Vdd = AVdd = 3.3
±
5% V dc, OVdd = 3.3
±
5% V dc, GND = 0 V dc, 0
£
T
j
£
105
°
C
100 MHz
Num
Characteristic
Min
Processor frequency
VCO frequency
SYSCLK (bus) frequency
1
2,3
4
SYSCLK cycle time
SYSCLK rise and fall time
SYSCLK duty cycle measured at 1.4 V
SYSCLK jitter
Internal PLL relock time
80
100
16.67
15.0
Ñ
40.0
Ñ
Ñ
Max
100
200
66.67
60.0
2.0
60.0
±
150
100
133.33 MHz
Unit
Min
120
133.33
16.67
15.0
Ñ
40.0
Ñ
Ñ
Max
133.33
266.66
66.67
60.0
2.0
60.0
±
150
100
MHz
MHz
MHz
ns
ns
%
ps
m
s
2
3
4
3, 5
1
1
Notes
Notes
:
1.
Caution
: The SYSCLK frequency and PLL_CFG[0Ð3] settings must be chosen such that the resulting
SYSCLK (bus) frequency, CPU (core) frequency, and PLL (VCO) frequency do not exceed their
respective maximum or minimum operating frequencies. Refer to the PLL_CFG[0Ð3] signal
description in the hardware speciÞcations for valid PLL_CFG[0Ð3] settings.
2. Rise and fall times for the SYSCLK input are measured from 0.4 V to 2.4 V.
3. Timing is guaranteed by design and characterization, and is not tested.
4. Cycle-to-cycle jitter, and is guaranteed by design.
5. Relock timing is guaranteed by design and characterization, and is not tested. PLL-relock time is the
maximum amount of time required for PLL lock after a stable Vdd and SYSCLK are reached during the
power-on reset sequence. This speciÞcation also applies when the PLL has been disabled and
subsequently re-enabled during sleep mode. Also note that HRESET must be held asserted for a
minimum of 255 bus clocks after the PLL-relock time during the power-on reset sequence.
PID6-603e Part Number Specifications
PRELIMINARYÑSUBJECT TO CHANGE WITHOUT NOTICE
3
Ordering Information
The following table provides the ordering information for the PID6-603e part numbers described herein.
Ordering Information for the PowerPC 603e
Package
Type
240
CQFP
Device
Rev
4.1
Process
PPC1.3
Mask Code
01H49P
CPU Frequency
(MHz)
100
133
100
133
100
133
255
CBGA
4.1
PPC1.3
71H49P
100
133
133
100
100
133
Motorola
Part Number
MPC603EFE100LN
MPC603EFE133LN
MPE603EFE100LN
MPE603EFE133LN
MPC603EFE100TN
MPC603EFE133TN
MPC603ERX100LN
MPC603ERX133LN
MPE603ERX133LN
MPE603ERX100LN
MPC603ERX100TN
MPC603ERX133TN
4
PID6-603e Part Number Specifications
PRELIMINARYÑSUBJECT TO CHANGE WITHOUT NOTICE
Part Marking
This section provides information on Motorola device marking standards. Parts are marked as the example shown below.
MPC603EFE100LN
µ
µ
MPC603ERX100LN
MMMMMM
MMMMMM
ATWLYYWWA
CCCCC
YWWLA
BGA
CQFP
Notes:
MMMMMM is the 6-digit mask code
ATWLYYWWA or YWWLA is the traceability code
CCCCC is the country of assembly (this space is left blank if parts are assembled in the United States)
Motorola Part Marking for CQFP and BGA Devices
Extended temperature parts are marked as shown below.
MPC603EFE100TN
µ
µ
MPC603ERX100TN
MMMMMM
MMMMMM
ATWLYYWWA
CCCCC
YWWLA
CQFP
Notes:
BGA
MMMMMM is the 6-digit mask code
ATWLYYWWA or YWWLA is the traceability code
CCCCC is the country of assembly (this space is left blank if parts are assembled in the United States)
Motorola Part Marking for Extended Temperature CQFP and BGA Devices
Information in this document is provided solely to enable system and software implementers to use PowerPC microprocessors. There are no express or implied copyright licenses granted
hereunder to design or fabricate PowerPC integrated circuits or integrated circuits based on the information in this document.
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products
for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including
without limitation consequential or incidental damages. ÒTypicalÓ parameters can and do vary in different applications. All operating parameters, including ÒTypicalsÓ must be validated
for each customer application by customerÕs technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed,
intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application
in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended
or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages,
and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such
claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/AfÞrmative Action Employer.
IBM is a registered trademark of International Business Machines Corporation.
The PowerPC name is a registered trademark and the PowerPC logotype and PowerPC 603e are trademarks of International Busines Machines Corporation, used by Motorola under
license from International Business Machines Corporation.
This optimization example comes from Damien's talk on pycomau, Efficient and Fast Programming with MicroPython. First, let's look at the following program, which flips the LED in a loop, and then calc...
NXP provides a comprehensive range of microcontroller and microprocessor products, which are widely used in industrial and consumer products. In industrial and consumer products, human-machine interfa...
[i=s]This post was last edited by Hot Ximixiu on 2021-5-21 07:38[/i]In view of the fact that many netizens have inquired about the problem of programming overload of Qinheng MCU CH55X, many friends ar...
I want to get a pointer to the image data currently stored in an HDC so that I can copy or edit the data. What I do now is to first use CreateDIBSection to create a device-independent bitmap, return a...
In "Algorithm: C Language Implementation", the logarithm with base 2 is expressed as lg, such as log2(15)=lg(15), while the logarithm lg in the mathematical definition expresses the logarithm with bas...
I am looking at a schematic diagram now. The AD and 74 series chips are powered by 5V, the microcontroller is powered by 3.3V, and the FPGA is powered by 3.3V+1.2V. I don't understand why semiconducto...
In the war without gunpowder between China and the United States,
ZTE
has become a new victim. The seven-year chip ban by the United States has pushed this communications giant to a life-or...[Details]
1. Problem When developing STM32 with IAR, I found that I could not print floating point numbers by redirecting printf to the serial port. The code is as follows: The output is as follows: It can...[Details]
1. Purpose Since the number of times the STM32 FLASH can be erased and written is limited, in order to protect our FLASH and extend the use time of the MCU, we can debug on the SRAM. SRAM is a ...[Details]
We have come a long way from the 2G era, and now 5G is about to be commercialized. Suddenly, we realize that time has passed quickly, but technology has never stopped. The activation of 5G heralds ...[Details]
Recently, the " ZTE
incident"
caused by the Sino-US trade war
has caused heated discussions in the electronics industry. It not only reflects that Chinese companies are lagging behind in the...[Details]
Recently, there was news that the US government asked Google to shut down the Android operating system for ZTE phones. After that, some people even imagined what the consequences would be if Intern...[Details]
In Windows environment, the source code is encoded in UTF-8. If the source file created by STM32CubeMX contains Chinese comments, then using STM32CubeMX to regenerate the source code will cause the C...[Details]
Chip: STM32F103C8T6 Application Pin: Output: PA0, PA1 TIM2 CH2 channel To achieve 50HZ (20ms) adjustable PWM output on the PA1 pin, set the system TIMx_CNT=8MHZ=8000 000HZ, set TIMx_PSC=800-1, then T...[Details]
After we understand the use of libopencm3, we find that libopencm3 is only suitable for small projects. Its biggest feature is the convenience of USB. So when we configure large projects, is there a ...[Details]
introduction STM32 has many registers, which are difficult to remember, so the official packaged two sets of library functions. One is the standard library, but the official has not updated it on F7,...[Details]
LAN8720 configuration: IP: 192.168.192.30 Gateway: 192.168.192.1 A high frequency of ARP packets is detected The content of the packet asks for the mac address of 192.168.192.1, and asks the resp...[Details]
Our photovoltaic power station starts working at 5:30 in the morning. When you are still sleeping, the inverter starts working to make money!
Some people are skeptical. The sun hasn't even...[Details]
China Energy Storage Network News:
The State Grid Corporation of China, this elephant, is planning to turn around and enter the emerging power service market.
The rallying cry for the tr...[Details]
In the Chinese automobile market, the trend of new energy vehicles and driverless cars is leading the transformation of China's automobile industry. As the world's largest automobile market, "Chinese...[Details]
As many companies listed with
the concept of
touch screen
begin to "transform and upgrade", the official voice of the TP industry is getting smaller and smaller. At the same time, the list o...[Details]
MicroPython Open Source section
京公网安备 11010802033920号
EEWORLD
