ZMID520xMROT36001 Rotary Application Module User Manual
Important Notes
Disclaimer
Integrated Device Technology, Inc. and its affiliated companies (herein referred to as “IDT”) shall not be liable for any damages arising out of defects resulting from
(i)
(ii)
delivered hardware or software
non-observance of instructions contained in this manual and in any other documentation provided to user, or
(iii) misuse, abuse, use under abnormal conditions, or alteration by anyone other than IDT.
TO THE EXTENT PERMITTED BY LAW, IDT HEREBY EXPRESSLY DISCLAIMS AND USER EXPRESSLY WAIVES ANY AND ALL WARRANTIES, WHETHER
EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, WITHOUT LIMITATION, IMPLIED WARRANTIES OF MERCHANTABILITY AND OF FITNESS FOR A
PARTICULAR PURPOSE, STATUTORY WARRANTY OF NON-INFRINGEMENT, AND ANY OTHER WARRANTY THAT MAY ARISE BY REASON OF USAGE
OF TRADE, CUSTOM, OR COURSE OF DEALING.
Restrictions in Use
IDT’s ZMID520xMROT36001 Rotary Application Module, consisting of the Rotary Application Module Sensor PCB, Sensor Target, Target Holder, Knob, and
Module Connection Cable, and the
ZMID520x EVK Application Software
are designed for use only in a laboratory for evaluation purposes. The hardware and
software must not be used for characterization measurements in terms of replacing calibrated laboratory environment and measurement devices. It must not be
used with any setup where there is a risk of injury or death.
!
Important Safety Warning:
These procedures can result in high currents, which can cause severe injury or death
and/or equipment damage. Only trained professional staff should connect external equipment and operate the software.
!
Important Equipment Warning:
Ensure the correct connection of all cables. Supplying the board using the wrong
polarity could result in damage to the board and/or the equipment.
Electrical Data .....................................................................................................................................................................5
Electrical Connections to interfacing an Application MCU ..................................................................................................5
Sensor Configuration and Calibration .................................................................................................................................7
Getting Started ...................................................................................................................................................................................6
Bill of Materials (BOM) .....................................................................................................................................................................13
Figure 3. Sensor Configuration for the Measurement .........................................................................................................................................8
Figure 4. Accuracy with Linearization at 1.5mm Airgap (AG150) .......................................................................................................................9
Figure 5. Accuracy with Linearization at 1.5mm Airgap and Effects of Airgap Changes ....................................................................................9
Figure 6. Accuracy with Linearization at 1.5mm Airgap and Effects of Displacement in X ...............................................................................10
Figure 7. Accuracy with Linearization at 1.5mm Airgap and Effects of Displacement in Y ...............................................................................10
System Data ........................................................................................................................................................................................4
Electrical Data .....................................................................................................................................................................................5
One microcontroller sends, and the other receives. Now I have a problem. After each string is sent, the sending microcontroller has to delay for about 400us before it can continue to send the next str...
Hello everyone! We have designed an acquisition and storage module. This module is designed using STM32+128MByte flash, which means that the acquisition and storage parts are already completed, and th...
Description: The network configuration of my real host: IP Address (192.168.16.95) Gateway is (192.168.16.1) DNS is (202.96.134.133) I access the Internet through the landlord's hub. It binds my IP to...
This article presents a method for porting the embedded operating system I~C/OS-II to a microcontroller with less RAN space. Based on this method, I~C/OS-II was successfully ported to the NS P430FI68 ...
In recent years, with the increasing demand for manufacturing and automated production management, industrial barcode scanners have gradually become an indispensable part of the industrial manufact...[Details]
If the ultimate form of a car is a silicon-based life form, then in
the field of
intelligent driving
, it has gradually taken on the appearance of a "veteran driver." In
the field of
the ...[Details]
Wave soldering is a crucial electronic component soldering technique used in the production of a wide range of electronic devices, from home appliances to computers to avionics. The process is wide...[Details]
As more and more consumers purchase new energy vehicles, the safety of electric vehicles has become a major concern. This has been particularly prominent following a series of electric vehicle fire...[Details]
With the rapid development of technology, automotive intelligence is increasing at an unprecedented rate. This not only enhances vehicle functionality and comfort, but also places higher deman...[Details]
Limited vocabulary recognition
According to the number of characters, words or short sentences in the vocabulary, it can be roughly divided into: less than 100 is small vocabulary; 100-1000 is...[Details]
Recently,
Xpeng Motors and Xinlian Integrated Circuit jointly announced the mass production of China's first hybrid silicon carbide product.
Designed and developed by Xpeng Motors and joint...[Details]
White light LEDs are voltage-sensitive devices. In actual operation, their upper limit is 20mA. However, the current often increases due to various reasons during use. If no protective measures are...[Details]
The Automotive Testing and Quality Assurance Expo (ATE 2025) will open on August 27th. At the expo, Rohde & Schwarz (R&S) will showcase six automotive testing solutions, themed "Intelligently Drivi...[Details]
On August 18th, Galaxis, a specialist in integrated intelligent intralogistics robotics, officially unveiled its next-generation, ultra-narrow aisle forklift mobile robot, the "VFR Ultra-Narrow Ser...[Details]
Recently, South Korean robotics giant WIRobotics launched its first general-purpose humanoid robot, ALLEX, at the Robotics Innovation Center (RIH) at the Korea University of Science and Technology....[Details]
With the increasing number of new energy vehicles on the road, the deployment of supporting facilities for these vehicles has accelerated, and new energy vehicles have gradually entered the vision ...[Details]
A half-bridge is an inverter topology for converting DC to AC. A typical half-bridge circuit consists of two controller switches, a three-wire DC power supply, two feedback diodes, and two capacito...[Details]
The 2025 China International Automotive Testing Exhibition will be held at the Shanghai World Expo Exhibition and Convention Center from August 27 to 29, 2025.
Clacton Seafront, UK, ...[Details]
On August 20, Geely announced its focus on "One Cockpit". Through a unified AI OS architecture, a unified AI Agent, and a unified user ID, it will achieve an All-in-One AI cockpit, create the first...[Details]
ARM Technology
京公网安备 11010802033920号
EEWORLD
