PRODUCT SHEET
NANEYE
AREA SCAN SENSORS
The NanEye 2D sensor
provides a true system on
chip camera head with fully
self timed readout
sequencing, AD conversion to
10 bit and bit serial data
transmission over LVDS. AWAIBA’s proprietary
data interface technology permits cable length’s
up to 3m with out any additional components at
the distal end. Due to the low energy dissipation
on the interface no complicated shielding is
required to meet EMC norms. With it’s 250 x 250
pixels at 3um pitch the sensors provide clear and
sharp images with outstanding MTF in a very
compact size. A frame rate of 44FPS permit
synchronization to any type of display. The
NanEye sensor provides delay free, smooth video
operation resulting in a safe operation and a clear
diagnosis. The sensors are connected to minimal
diameter cabling solutions. As an option, a small
lens can be assembled to the chip, this option
does not increase the total diameter of the sensor,
making it the world most compact digital camera.
For pricing and lead time please
contact
ISS.CIS_info@ams.com.
SPECIFICATIONS
Part status
Resolution
Pixel size
Optical format
Shutter type
Frame rate
Output interface
Sensitivity
Full well charge
Dark noise
Dynamic range
SNR max
Fixed pattern noise
Chroma
Supply voltage
Power
Operating temperature
range
RoHS compliance
Package
Production
0.0625MP - 250 (H) x 250 (V)
3x3
1/15"
Electronic rolling shutter
42 - 55 FPS
10 bit digital LVDS
11.5 DN/nJ/cm2 at maximum
gain
15 ke-
1.1 DN rms
58 dB
41
DSNU: 2.8 [DN] PRNU: 4.8%
Mono and RGB
1.8V - 2.4V
4.2 mW at nominal supply
2.1V
0ºC - 60ºC
Yes
BGA
CMOSIS takes care to ensure the accuracy of the information contained in this document but reserves the right to change specifications without notice.
Page 1/2