VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving versus
Wraparound Design and PCR of 5 ppm at Rated Power
FEATURES
•
Temperature Coefficient of Resistance (TCR):
± 0.05 ppm/°C typical (0 °C to + 60 °C)
Pb-free
Available
± 0.2 ppm/°C typical (- 55 °C to + 125 °C,
+
25 °C Ref.)
RoHS*
•
Tolerance: to ± 0.01 % (100 ppm)
COMPLIANT
•
Power Coefficient “ΔR due to self heating”
5 ppm at Rated Power
•
Load Life Stability (70 °C for 2000 hours):
± 0.005 % (50 ppm)
•
Power Rating to: 600 mW at + 70 °C
•
Electrostatic Discharge (ESD) above 25 000 V
•
Resistance Range: 10Ω to 150 kΩ (for lower and higher
values, please contact us)
•
Non Inductive, Non Capacitive Design
•
Short time overload
≤
0.005 % (50 ppm)
•
Non hot spot design
•
Rise time: 1ns without ringing
•
Current Noise: - 40 dB
•
Voltage Coefficient < 0.1 ppm/V
•
Non Inductive: < 0.08 µH
•
Terminal Finishes available: Lead (Pb)-free
Tin/Lead Alloy
•
Matched sets are available per request
•
Any value available within resistance range (e.g. 1K2345)
•
Prototype samples available from 48 hours. For more
information, please contact foil@vishay.com
•
For better performances please contact us
Bottom View
Any value at tolerance available within resistance range
INTRODUCTION
One of the most important parameters influencing stability is
the Temperature Coefficient of Resistance (TCR). Although
the TCR of Bulk Metal
®
Foil resistors is considered extremely
low, this characteristic has been further refined over the
years.
The VFCP Series utilizes ultra precision Bulk Metal
®
Z-Foil.
The Z-Foil technology provides a significant reduction to the
resistive element’s sensitivity to ambient temperature
variations (TCR) and to self heating when power is applied
(power coefficient).
Along with the inherently low PCR and TCR, Z-Foil
technology also provides remarkably improved load life
stablility, low noise and availability of tight tolerance.
IM
PR
O
VE
D
The Flip Chip configuration provides a substantial PCB
space saving of more than 35 % vs. a surface mount chip
with wraparound terminations. The VFCP is available in any
value within the specified resistance range.
Our Application Engineering Department is available to
advise and make recommendations. For non-standard
technical requirements and special applications, please
contact us.
TABLE 1 - TOLERANCE AND TCR VS
RESISTANCE VALUE
TOLERANCE
(%)
± 0.01
Percent of Rated Power
RESISTANCEVALUE
(Ω)
250 to 150K
TYPICAL TCR AND
MAX. SPREAD
(- 55 °C to + 125 °C,
+ 25 °C Ref.)
± 0.2 ± 1.6
100 to < 250
50 to < 100
25 to < 50
10 to < 25
± 0.02
± 0.2 ± 1.6
± 0.05
± 0.1
± 0.25
± 0.2 ± 1.8
± 0.2 ± 2.8
± 0.2 ± 2.8
* Pb containing terminations are not RoHS compliant, exemptions may apply
Document Number: 63106
Revision: 28-Jun-07
For any questions, contact: foil@vishay.com
www.vishay.com
1
PR
O
DU
CT
APPLICATIONS
•
•
•
•
•
•
•
•
•
Automatic Test Equipment (ATE)
High Precision Instrumentation
Laboratory, Industrial and Medical
Audio
EB Applications (electron beam scanning and recording
equipment, electron microscopes)
Military and Space
Airborne
Down Hole instrumentation
Communication
FIGURE 1 - POWER DERATING CURVE
- 55 °C
100
75
50
25
0
- 75
+ 70 °C
- 50
- 25
0
+ 25
+ 50
+ 75 + 100 + 125 + 150 + 175
Ambient Temperature (°C)
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving versus
Wraparound Design and PCR of 5 ppm at Rated Power
TABLE 2 - DSCC SPECIFICATIONS
(Vishay resistors are listed on the following DSCC specifications)
MODEL
VFCP1206
DSCC
2009
MIL SPEC
MIL-PRF-55342
Note
• For VFCP0805, VFCP1506, VFCP2010 and VFCP2512 DSCC Drawings, please contact foil@vishay.com
FIGURE 2 -TRIMMING TO VALUES
(Conceptual Illustration)
Interloop Capacitance
Reduction in Series
Mutual Inductance
Reduction due
to Change in
Current Direction
Note:
Foil shown in
black,
etched spaces in
white
TABLE 3 - SPECIFICATIONS
CHIP
SIZE
0805
1206
RATED
POWER
(mW)
at + 70 °C
100 mW
250 mW
MAXIMUM
VOLTAGE
RATING
(≤
P
×
R
)
34 V
86 V
RESISTANCE
RANGE (Ω)
10 to 12K
10 to 30K
10 to 40K
MAXIMUM
WEIGHT
(mg)
5.2
10.3
12
IM
PR
O
VE
D
1506
2010
300 mW
400 mW
109 V
200 V
220 V
10 to 100K
10 to 150K
25
35
2512
600 mW
TABLE 5 - PERFORMANCES
TEST OR CONDITION
MIL-PRF-55342
CHARACTERISTIC E
ΔR
LIMITS
± 0.1 %
Thermal Shock
Low Temperature Operation
Short Time Overload
± 0.1 %
± 0.1 %
High Temperature Exposure
± 0.1 %
Resistance to Soldering Heat
Moisture Resistance
± 0.2 %
± 0.2 %
Load Life Stability + 70 °C for 2000 hours
at Rated Power
± 0.5 %
Note
1. As shown + 0.01 W to allow for measurement errors at low values.
www.vishay.com
2
For any questions, contact: foil@vishay.com
Document Number: 63106
Revision: 28-Jun-07
PR
O
DU
CT
Current Path
Before Trimming
Current Path
After Trimming
Trimming Process
Removes this Material
from Shorting Strip Area
Changing Current Path
and Increasing
Resistance
TABLE 4 - LOAD LIFE STABILITY
(+ 70 °C FOR 2000 HOURS)
CHIP SIZE
0805
1206
1506
2010
2512
MAXIMUM
ΔR
LIMITS
± 0.005 % at 50 mW
± 0.01 % at 100 mW
± 0.005 % at 150 mW
± 0.01 % at 250 mW
± 0.005 % at 150 mW
± 0.01 % at 300 mW
± 0.005 % at 200mW
± 0.01 % at 400 mW
± 0.005 % at 500 mW
± 0.01 % at 600 mW
TYPICAL
ΔR
LIMITS
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
± 0.01 % (100 ppm)
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
± 0.005 % (50 ppm)
MAXIMUM
ΔR
LIMITS
1)
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.01 % (100 ppm)
± 0.02 % (200 ppm)
± 0.015 % (150 ppm)
± 0.02 % (200 ppm)
± 0.01 % (100 ppm)
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Ultra High Precision Z-Foil Flip Chip Resistor with TCR
Vishay Foil Resistors
of ± 0.05 ppm/°C, 35 % Space Saving versus
Wraparound Design and PCR of 5 ppm at Rated Power
TABLE 6 - DIMENSIONS AND LAND PATTERN
in inches (millimeters)
BOTTOM VIEW (showing terminals for mounting)
D
Solder Terminals
LAND PATTERN
W
W1 [W - 0.003"]
L - 0.005 (0.13)
L
CHIP
SIZE
0805
1206
1506
2010
2512
L
± 0.005 (0.13)
0.079 (2.01)
0.126 (3.20)
0.150 (3.81)
0.200 (5.08)
0.250 (6.35)
W
± 0.005 (0.13)
0.049 (1.24)
0.062 (1.57)
0.062 (1.57)
0.100 (2.54)
0.126 (3.20)
THICKNESS
MAXIMUM
0.025 (0.64)
0.025 (0.64)
0.025 (0.64)
0.025 (0.64)
0.025 (0.64)
Note
1. Land Pattern Dimensions are per IPC-782
IM
PR
O
VE
D
FIGURE 3 - CHIP CONFIGURATION
High Purity Alumina Substrate
Resistive
Bulk
®
Metal Foil
Solder
Protective Coating
Document Number: 63106
Revision: 28-Jun-07
For any questions, contact: foil@vishay.com
PR
O
DU
CT
G
X
Z
D
Z
1)
G
1)
X
1)
± 0.005 (0.13)
0.010 (0.25)
0.015 (0.38)
0.012 (0.30)
0.020 (0.51)
0.024 (0.61)
MAXIMUM
MINIMUM
MAXIMUM
0.078 (1.98)
0.125 (3.18)
0.150 (3.81)
0.199 (5.05)
0.250 (6.35)
0.053 (1.35)
0.090 (2.29)
0.120 (3.05)
0.153 (3.89)
0.196 (4.98)
0.049 (1.24)
0.062 (1.57)
0.062 (1.57)
0.100 (2.54)
0.126 (3.20)
FIGURE 4 - TYPICAL TCR CURVE Z-FOIL
(For more details, see Table 1)
+ 500
+ 400
+ 300
+ 200
+ 100
ΔR
0
R
(ppm)
- 100
- 200
- 300
- 400
- 500
- 55
- 25
0
+ 25
+ 60 + 75
+ 100 + 125
- 0.16 ppm/°C
0.05 ppm/°C
- 0.1 ppm/°C
0.1 ppm/°C
0.14 ppm/°C
0.2 ppm/°C
Ambient Temperature (°C)
Note
• The TCR values for < 100Ω are influenced by the termination
composition and result in deviation from this curve
www.vishay.com
3
VFCP Series (0805, 1206, 1506, 2010, 2512) (Z-Foil)
Vishay Foil Resistors
Ultra High Precision Z-Foil Flip Chip Resistor with TCR
of ± 0.05 ppm/°C, 35 % Space Saving versus
Wraparound Design and PCR of 5 ppm at Rated Power
TABLE 7 - GLOBAL PART NUMBER INFORMATION
NEW GLOBAL PART NUMBER: Y162910K0000T9W (preferred part number format)
DENOTES PRECISION
Y
VALUE
R
=
Ω
K
= kΩ
AER*
0
= Standard
9
= Lead (Pb)-free
1 - 999
= Custom
Y
1
6
2
9
1
0
PRODUCT CODE
1629
= VFCP0805
1630
= VFCP1206
1631
= VFCP1506
1632
= VFCP2010
1633
= VFCP2512
RESISTANCE TOLERANCE
T
= ± 0.01 %
Q
= ± 0.02 %
A
= ± 0.05 %
B
= ± 0.10 %
C
= ± 0.25 %
D
= ± 0.50 %
F
= ± 1.00 %
FOR EXAMPLE: ABOVE GLOBAL ORDER Y1629 10K0000 T 9 W:
TYPE: VFCP0805
VALUE: 10.0 kΩ
ABSOLUTE TOLERANCE: ± 0.01 %
TERMINATION: Lead (Pb)-free
PACKAGING: Waffle Pack
HISTORICAL PART NUMBER: VFCP0805 10K000 TCR0.2 T S W (will continue to be used)
VFCP0805
MODEL
VFCP0805
VFCP1206
VFCP1506
VFCP2010
VFCP2512
10K000
OHMIC VALUE
10.0 kΩ
TCR0.2
TCR
Characteristic
T
IM
PR
O
VE
D
Note
* For non-standard requests, please contact Application Engineering.
www.vishay.com
4
For any questions, contact: foil@vishay.com
PR
O
DU
CT
K
0
0
0
0
T
9
W
PACKAGING
R
= Tape and Reel
W
= Waffle Pack
S
W
RESISTANCE
TOLERANCE
T
= ± 0.01 %
Q
= ± 0.02 %
A
= ± 0.05 %
B
= ± 0.10 %
C
= ± 0.25 %
D
= ± 0.50 %
F
= ± 1.00 %
TERMINATION
PACKAGING
S
= Lead (Pb)-free
B
= Tin/Lead
T
= Tape and Reel
W
= Waffle Pack
Document Number: 63106
Revision: 28-Jun-07
Legal Disclaimer Notice
Vishay
Notice
Specifications of the products displayed herein are subject to change without notice. Vishay Intertechnology, Inc.,
or anyone on its behalf, assumes no responsibility or liability for any errors or inaccuracies.
Information contained herein is intended to provide a product description only. No license, express or implied, by
estoppel or otherwise, to any intellectual property rights is granted by this document. Except as provided in Vishay's
terms and conditions of sale for such products, Vishay assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of Vishay products including liability or warranties relating to fitness
for a particular purpose, merchantability, or infringement of any patent, copyright, or other intellectual property right.
The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications.
Customers using or selling these products for use in such applications do so at their own risk and agree to fully
indemnify Vishay for any damages resulting from such improper use or sale.
Document Number: 91000
Revision: 08-Apr-05
www.vishay.com
1
京公网安备 11010802033920号
EEWORLD
