DIAMOND
Fiber Optic Components
The
E-2000
™
PS
System is designed for high power applications up to 2 Watt
optical power. The
E-2000
™
PS
connector has been developped to support the
continuous raise of higher bitrates and longer trasmission distances, within
DWDM technology, and is based on expanded beam techology.
A section of graded index fiber is introduced as a collimating lens, which enlarges
the beam diameter and reduces power density at the connector interface.
All of the features, users have come to expect from the E-2000 family, are available
from the
E-2000
™
PS
, including: ease of installation, integrated protection caps,
color coding, mechanical keying and excellent vibration resistance.
E-2000
™
PS
E-2104.6 PS
E-2144.6 PS
POWER SOLUTION
Safety information for E-2000™ Power Solution
The E-2000™ Power Solution (PS) connector takes advantage of the expanded beam technology to reduce the density of
the optical power at the interface of the connection. This way the connector results to be less sensitive to contaminations,
and the bearable maximum power that can be transmitted without consequences is gr eater.
Cleaning
Cleanliness still remains the key word using high power. The basic concept using PS connectors is therefore the following:
" before each mating procedure, the connectors must be absolutely clean and inspected with a microscope ". The ferrules
surface inspection should be operated using an optical microscope with a magnification of at least 200x.
The connector is normally affected by contaminations during handling and mating procedures; the degree of cleanliness
of the overall installation is also critical parameter to be taken into consideration.
Handling
The E-2000™ Power Solution connectors should be operated with high power only when connected. When unmated, the
light source must absolutely be switched off.
Safety
Using standard as well as high power PS connectors with optical power of tens or hundreds of mW, the knowledge and
respect of the safety standards is essential.
A laser source emitting 1 Watt at 1550 nm in a SM fiber is for instance recorded as a class 3B (IEC 825-1 and 825-2
standards), while the same laser with a collimated output will be classified as a class 4.
The main safety precautions that have to be considered working with class 4 lasers are summarized as follows:
- usage in restricted area, access only for authorized and qualified personnel ;
- use protective glasses, skin protective measures recommended;
- optical behavior under control: eliminate reflections (also diffuse), close unused optical channels, avoid
light beams on eye level;
- switch on/off system with remote control or interlock and additional automatic switch off safety system;
- warning signal when sources are active;
- laser classification markings and danger indications.
Highlights
Injection molded housing
(UL 94 V0 flammability
rating)
Spring-loaded shutters on
mating adapters
• Benefits
• Connector housing totally encloses ferrule to
optimally protect it from dust, contaminants
and scratches.
• Engage automatically to protect personnel
from eye-damaging laser radiation.
• Angled, anti-reflection surface ensures low
reflectance in unmated state.
• Maximizes operator eye safety protection
from damaging laser radiation.
• Close automatically upon extraction to
protect ferrule from dust and scratches.
• Permit clear and unmistakable identification
of lines on crowded patch panels.
• Guard against improper connections.
• Single channel components can be
upgrated to duplex through the use of a
simple clip-bridge and an extended
thumb-latch.
Integrated black metal
protective caps
Interchangeable color-
coded and mechanically
keyed thumb-latches and
frames
High modular connector-
system
Specifications:
STANDARD
Insertion loss (IL)
Insertion loss (IL)
Repeatability of IL
Single mode 4° APC
typ. 0.2 max. 0.6
typ. 0.2 max. 0.4
max.
±0.1
max.
±0.15
min. 75*
1000 mate/demate cycles
-40 / +85
-40 / +90
°C
°C
May be further limited by cable
specifications
Units Test conditions
dB
dB
dB
dB
dB
IEC 61300; Random
IEC 61300; Against reference
Over service life
IEC 61300;
λ
= from 1300 to 1625 nm
IEC 61300
∆
IL vs. wavelength
Return loss (RL)
Service life
Operating temperature
Storage temperature
*
Measured with high resolution reflectometer HP 8504A
DIAMOND SA
Via dei Patrizi 5
CH-6616 LOSONE
Tel. ++41-91/785 45 45
Fax ++41-91/785 45 00
e-mail: info@diamond-fo.com
Specifications subject to change
without notice
002-037-210P010111
31,5
31,5
Order Numbers:
Type designation:
Ferrule style:
External parts:
Polish geometry:
Dimensions
Fiber/Cable
9/125/900
9/125/900/2100
9/125/900/2500
9/125/900/3000
9/125/900/3500
E-2104.6
Zirconia/copper-nickel alloy insert (Pilzferrule)
Plastic red
Convex (APC 4°)
Order Number
Unterminated connector
33A - 000 - 001 L 000
33A - 000 - 002 L 000
33A - 000 - 003 L 000
33A - 000 - 004 L 000
33A - 000 - 005 L 000
Terminated assembly
33A - xxx - 001 L xxx
33A - xxx - 002 L xxx
33A - xxx - 003 L xxx
33A - xxx - 004 L xxx
33A - xxx - 005 L xxx
1
2
3
4
Type designation:
Ferrule material:
External parts:
Polish geometry:
56
E-2144.6 PS Compact
Zirconia/copper-nickel alloy insert (Pilzferrule)
Plastic red
Convex (APC 4°)
Order Number
Unterminated connector
33B - 000 - 001 L 000
33B - 000 - 002 L 000
33B - 000 - 003 L 000
33B - 000 - 004 L 000
33B - 000 - 005 L 000
Terminated assembly
33B - xxx - 001 L xxx
33B - xxx - 002 L xxx
33B - xxx - 003 L xxx
33B - xxx - 004 L xxx
33B - xxx - 005 L xxx
1
2
3
4
5
9
Ø 2,5
E-2000
™
PS
12
E-2000
PS COMPACT
™
(Available upon request)
Dimensions
Fiber/Cable
9/125/900
9/125/900/2100
9/125/900/2500
9/125/900/3000
9/125/900/3500
56
7,4
COLOR CODING
Thumb-latch
blue
30B
green
31B
black
32B
red
33B
orange
34B
yellow
35B
white
36B
violet
37B
Order No.
14,6
COLOR CODING
Thumb-latch
Order No.
blue
30A
green
31A
black
32A
red
33A
orange
34A
yellow
35A
white
36A
violet
37A
MECHANICAL KEYING
Thumb-latch No.
1 (red)
40B
2 (brown) 3 (yellow) 4 (orange) 5 (violet) 6 (white)
41B
42B
43B
44B
45B
–––
–––
–––
–––
Order No.
MECHANICAL KEYING
Thumb-latch No.
Order No.
1 (red)
40A
2 (brown) 3 (yellow) 4 (orange) 5 (violet) 6 (white)
41A
42A
43A
44A
45A
–––
–––
–––
–––
Connectors for other fiber and cable dimensions available upon request.
Connectors for other fiber and cable dimensions available upon request.
ADAPTER
ADAPTER
Type designation:
Mating sleeve:
External parts:
E-2201.2 PS
Zirconia
Plastic red
Type designation:
Mating sleeve:
External parts:
E-2210.2 PS Compact
Zirconia
Plastic Red
167-0x0-001Vxxx
070-133-007V001
070-133-014V001
070-133-009V001
167-0x0-001Vxxx
070-133-011V001
070-133-010V001
COLOR CODING
Frame color
Order Number
167 - 03x - 001 V 501
167 - 03x - 001 V 502
167 - 03x - 001 V 503
167 - 03x - 001 V 504
1
3
CUTOUT DIMENSIONS
Frame color
Orange
Yellow
White
Violet
Order Number
Max wall thickness 2 mm
15
±0.2
COLOR CODING
Frame color
Blue
Green
Black
Red
Order Number
167 - 00x - 001 V 501
167 - 00x - 001 V 502
167 - 00x - 001 V 503
167 - 00x - 001 V 504
1
3
Blue
Frame color
Orange
Yellow
White
Violet
Order Number
167 - 00x - 001 V 505
167 - 00x - 001 V 506
167 - 00x - 001 V 507
167 - 00x - 001 V 508
1
3
±0,1
±0,2
167 - 03x - 001 V 505
167 - 03x - 001 V 506
±0.1
Green
9,1
±0,2
Red
167 - 03x - 001 V 508
1
3
MECHANICAL KEYING
Frame No.
13,3
18
(M
2) Ø
2.2
+0.2
0
Order Number
167 - 03x - 101 V 500
167 - 03x - 201 V 500
167 - 03x - 301 V 500
1
2
Frame No.
4
(Orange)
5
(Violet)
6
(White)
Order Number
167 - 03x - 401 V 500
167 - 03x - 501 V 500
167 - 03x - 601 V 500
1
2
MECHANICAL KEYING
Frame No.
1
(Red)
2
(Brown)
3
(Yellow)
Order Number
167 - 00x - 101 V 500
167 - 00x - 201 V 500
167 - 00x - 301 V 500
1
2
1
(Red)
2
(Brown)
3
(Yellow)
15
±0,2
Max wall thickness 1,6 mm
Frame No.
4
(Orange)
5
(Violet)
6
(White)
Order Number
167 - 00x - 401 V 500
167 - 00x - 501 V 500
167 - 00x - 601 V 500
1
2
(M
2
Max wall thickness 2 mm
)Ø
0
9,1
±0,2
Max wall thickness 1,6 mm
13,3
±0,2
Order Number Codes
1
2
Connector code
Connector code for termination on other end of assembly:
- For pigtails
insert 000
- For patch assemblies
insert connector code for other connector
3
Code for fiber or cable
4
Length in meters
Order Number Codes for Mating Adapters
1
2
3
Max wall thickness 1,6 mm
Code for fixation type
-
0
for basic body
-
1
for assembled screw fixing clip
Code for mechanical keying
Code for color coding
-
2
for assembled quick fixing clip
Other fixations or colors upon request.
23
13,1
±0.2
0
12
3
13,3
±0,2
2,2
+0.2
13,3
18
±0.2
CUTOUT DIMENSIONS
Black
167 - 03x - 001 V 507
13,1
stm32/stm8
京公网安备 11010802033920号
EEWORLD
