GPIO can be used as ADO Pin through GPIOPinTypeADC().
If I want to use the ADC1-3 pins as GPIO, is that possible?What is the API in StellarisWare?
I want the ADC0 pin to remain functional, and use the...
void led_on(void) { int i, nOut; nOut = 0xF0; rGPFDAT = nOut & 0x70; //0xF0 & 0x70 = 0x70 for(i = 0 ; i result is 0x20 rGPFDAT = nOut &0x30; for(i = 0 ; i the result is 0x00 for(i = 0 ; i The result i...
[b]Abstract[/b]: This paper introduces an inverter power system with 8XC196MC as the core. Its inverter control system realizes full digital operation. The SPWM control pulse waveform of the inverter ...
The process of changing an EXE or DLL program file after it has been loaded to reflect the actual load address is called "fixing up". Can anyone explain to me what this fix up means? There is also thi...
This article focuses on the rapid charging of electric vehicle batteries using mains power and solar cells. In terms of commercial power, charging is carried out for high peak charging current to shor...
A single-chip microcomputer is also called a single-chip microcontroller. It is not a chip that completes a certain logical function, but a computer system integrated into one chip. In general, a c...[Details]
In
circuit design,
current
measurement
is widely used, and the main fields are divided into three categories: in measurement,
the electric meter
is used to measure the curre...[Details]
The Mobile Industry Processor Interface (MIPI) Alliance is an organization responsible for promoting the standardization of software and hardware in mobile devices. It has released the D-PHY specif...[Details]
All electronic design engineers and scientists have performed electrical signal analysis, or signal analysis for short. Through this basic measurement, they can gain insight into signal details and...[Details]
Abstract: In order to generate a stable excitation signal, the design of a digital frequency synthesizer is implemented on FPGA using Verilog hardware language. The design includes accumulator, wav...[Details]
1 Introduction
Ultrasonic waves have strong directivity, slow energy consumption, and can propagate over long distances in a medium, so they are used for distance measurement. Ultrasonic detec...[Details]
1. Introduction
At present, most lighting equipment still uses traditional energy for lighting. Making full use of solar energy as the energy supply for lighting equipment is of great si...[Details]
Product series: PB-B-RS232/485 interface (hereinafter sometimes referred to as "interface") is a product in the PROFIBUS bus bridge series.
The main purpose of the bridge series ...[Details]
Overview:
This paper introduces a method of connecting a CAN-bus network with Ethernet to form a medium-sized remote monitoring/data transmission network.
CAN (Controller Area Network) is ...[Details]
Many battery-powered systems require a visual indicator to show when the battery needs to be replaced. LEDs are commonly used for this purpose, but they consume at least 10mA of current. This con...[Details]
This controller uses PIC16C54 single-chip microcomputer as the controller, and it is very easy to use: just connect a telephone line to the loudspeaker through the controller, and you can rem...[Details]
This article will introduce a design method for a distributed control system used in a tracking car, which can perform distributed control of motor modules, sensor modules, and lighting control mod...[Details]
Energy conservation and environmental protection are the main directions of current automotive technology research, and power batteries are the key to electric vehicle technology. Research on powe...[Details]
introduction
Belt drive is a common transmission device used in industrial production. Its commonly used speed detection device is a photoelectric encoder installed at the rotating end of th...[Details]
Microcontroller MCU
京公网安备 11010802033920号
EEWORLD
