Note the following details of the code protection feature on Microchip devices:
•
•
Microchip products meet the specification contained in their particular Microchip Data Sheet.
Microchip believes that its family of products is one of the most secure families of its kind on the market today, when used in the
intended manner and under normal conditions.
There are dishonest and possibly illegal methods used to breach the code protection feature. All of these methods, to our
knowledge, require using the Microchip products in a manner outside the operating specifications contained in Microchip’s Data
Sheets. Most likely, the person doing so is engaged in theft of intellectual property.
Microchip is willing to work with the customer who is concerned about the integrity of their code.
Neither Microchip nor any other semiconductor manufacturer can guarantee the security of their code. Code protection does not
mean that we are guaranteeing the product as “unbreakable.”
•
•
•
Code protection is constantly evolving. We at Microchip are committed to continuously improving the code protection features of our
products. Attempts to break Microchip’s code protection feature may be a violation of the Digital Millennium Copyright Act. If such acts
allow unauthorized access to your software or other copyrighted work, you may have a right to sue for relief under that Act.
Information contained in this publication regarding device
applications and the like is provided only for your convenience
and may be superseded by updates. It is your responsibility to
ensure that your application meets with your specifications.
MICROCHIP MAKES NO REPRESENTATIONS OR
WARRANTIES OF ANY KIND WHETHER EXPRESS OR
IMPLIED, WRITTEN OR ORAL, STATUTORY OR
OTHERWISE, RELATED TO THE INFORMATION,
INCLUDING BUT NOT LIMITED TO ITS CONDITION,
QUALITY, PERFORMANCE, MERCHANTABILITY OR
FITNESS FOR PURPOSE. Microchip disclaims all liability
arising from this information and its use. Use of Microchip
devices in life support and/or safety applications is entirely at
the buyer’s risk, and the buyer agrees to defend, indemnify and
hold harmless Microchip from any and all damages, claims,
suits, or expenses resulting from such use. No licenses are
conveyed, implicitly or otherwise, under any Microchip
intellectual property rights unless otherwise stated.
Trademarks
The Microchip name and logo, the Microchip logo, AnyRate, AVR,
AVR logo, AVR Freaks, BeaconThings, BitCloud, chipKIT, chipKIT
logo, CryptoMemory, CryptoRF, dsPIC, FlashFlex, flexPWR,
Heldo, JukeBlox, K
EE
L
OQ
, K
EE
L
OQ
logo, Kleer, LANCheck, LINK
MD, maXStylus, maXTouch, MediaLB, megaAVR, MOST, MOST
logo, MPLAB, OptoLyzer, PIC, picoPower, PICSTART, PIC32
logo, Prochip Designer, QTouch, RightTouch, SAM-BA, SpyNIC,
SST, SST Logo, SuperFlash, tinyAVR, UNI/O, and XMEGA are
registered trademarks of Microchip Technology Incorporated in
the U.S.A. and other countries.
ClockWorks, The Embedded Control Solutions Company,
EtherSynch, Hyper Speed Control, HyperLight Load, IntelliMOS,
mTouch, Precision Edge, and Quiet-Wire are registered
trademarks of Microchip Technology Incorporated in the U.S.A.
Adjacent Key Suppression, AKS, Analog-for-the-Digital Age, Any
Capacitor, AnyIn, AnyOut, BodyCom, CodeGuard,
CryptoAuthentication, CryptoCompanion, CryptoController,
dsPICDEM, dsPICDEM.net, Dynamic Average Matching, DAM,
ECAN, EtherGREEN, In-Circuit Serial Programming, ICSP, Inter-
Chip Connectivity, JitterBlocker, KleerNet, KleerNet logo, Mindi,
MiWi, motorBench, MPASM, MPF, MPLAB Certified logo, MPLIB,
MPLINK, MultiTRAK, NetDetach, Omniscient Code Generation,
PICDEM, PICDEM.net, PICkit, PICtail, PureSilicon, QMatrix,
RightTouch logo, REAL ICE, Ripple Blocker, SAM-ICE, Serial
Quad I/O, SMART-I.S., SQI, SuperSwitcher, SuperSwitcher II,
Total Endurance, TSHARC, USBCheck, VariSense, ViewSpan,
WiperLock, Wireless DNA, and ZENA are trademarks of Microchip
Technology Incorporated in the U.S.A. and other countries.
SQTP is a service mark of Microchip Technology Incorporated in
the U.S.A.
Microchip received ISO/TS-16949:2009 certification for its worldwide
headquarters, design and wafer fabrication facilities in Chandler and
Tempe, Arizona; Gresham, Oregon and design centers in California
and India. The Company’s quality system processes and procedures
are for its PIC
®
MCUs and dsPIC
®
DSCs, K
EE
L
OQ
®
code hopping
devices, Serial EEPROMs, microperipherals, nonvolatile memory and
analog products. In addition, Microchip’s quality system for the design
and manufacture of development systems is ISO 9001:2000 certified.
Silicon Storage Technology is a registered trademark of Microchip
Technology Inc. in other countries.
GestIC is a registered trademark of Microchip Technology
Germany II GmbH & Co. KG, a subsidiary of Microchip Technology
Inc., in other countries.
All other trademarks mentioned herein are property of their
respective companies.
© 2018, Microchip Technology Incorporated, All Rights Reserved.
ISBN: 978-1-5224-2671-4
QUALITY MANAGEMENT SYSTEM
CERTIFIED BY DNV
==
ISO/TS 16949
==
DS20005939A-page 2
2018 Microchip Technology Inc.
DM160232 SERIAL MEMORY
SINGLE-WIRE EVALUATION KIT
USER’S GUIDE
Table of Contents
Preface ........................................................................................................................... 5
Chapter 1. Product Overview
1.1 Introduction ..................................................................................................... 9
1.2 AT21CS Series Device Overview ................................................................... 9
1.3 DM160232 Evaluation Kit Overview ............................................................... 9
1.4 Evaluation Kit Contents ................................................................................ 10
1.5 Supported Devices ....................................................................................... 10
1.6 Operational Requirements ........................................................................... 10
Chapter 2. Installation and Operation
2.1 Introduction ................................................................................................... 11
2.2 Installing the USB Base Board Driver .......................................................... 11
2.3 Installing the Graphical User Interface (GUI) ............................................... 12
2.4 Evaluation Kit Setup Procedure ................................................................... 15
Chapter 3. Graphical User Interface (GUI)
3.1 Introduction ................................................................................................... 17
3.2 Main Title Bar ............................................................................................... 18
3.3 Query Device ................................................................................................ 18
3.4 System Status .............................................................................................. 18
3.4.1 Kit Part Number ......................................................................................... 18
3.4.2 Firmware Revision ..................................................................................... 19
3.4.3 Socket Board Temp ................................................................................... 19
3.4.4 Device in Socket ........................................................................................ 19
3.4.5 Kit Protocol ................................................................................................ 19
3.4.6 Socket Board SN # .................................................................................... 19
3.5 Device Conditions ........................................................................................ 19
3.5.1 Supply Voltage Slider ................................................................................ 19
3.5.2 Frequency (Kbps) Slider ............................................................................ 20
3.6 Device Status ............................................................................................... 20
3.6.1 Serial Number ........................................................................................... 20
3.6.2 Slave Address ........................................................................................... 20
3.6.3 MFG ID Register ....................................................................................... 20
3.6.4 Security Register User Space ................................................................... 20
3.6.5 Zone X Lock State ..................................................................................... 21
3.7 Set Device Protection ................................................................................... 21
3.8 Device Specification ..................................................................................... 21
3.9 Transaction Log ............................................................................................ 22
3.9.1 Clear Log ................................................................................................... 22
3.9.2 Export Log ................................................................................................. 22
3.9.3 Legend ...................................................................................................... 22
2018 Microchip Technology Inc.
DS20005939A-page 3
DM160232 Serial Memory Single-Wire Evaluation Kit User’s Guide
3.10 GUI Memory Array ..................................................................................... 23
3.11 Array Actions .............................................................................................. 24
3.11.1 HEX ......................................................................................................... 24
3.11.2 ASCII ....................................................................................................... 24
3.11.3 LOAD ....................................................................................................... 24
3.11.4 SAVE ....................................................................................................... 25
3.11.5 PROGRAM .............................................................................................. 25
3.11.6 REFRESH ............................................................................................... 26
3.12 Security Register ........................................................................................ 26
3.13 Array Buttons .............................................................................................. 27
3.13.1 Read ........................................................................................................ 27
3.13.2 Write ........................................................................................................ 28
3.13.3 Go To Address ........................................................................................ 29
3.13.4 Other Actions ........................................................................................... 30
3.13.5 Support .................................................................................................... 30
Chapter 4. USB Base Board Firmware Upgrade
4.1 Introduction ................................................................................................... 31
4.2 Installing the Graphical User Interface (GUI) ............................................... 36
4.3 USB Base Board DFU Mode ........................................................................ 36
4.4 FLIP Software Utility ..................................................................................... 38
Chapter 5. Troubleshooting Guide
Appendix A. Schematics
A.1 Introduction .................................................................................................. 44
A.2 SWI Socket Board (02-10681) ..................................................................... 45
A.3 USB Base Board (02-10682) ....................................................................... 46
Appendix B. Bill of Materials (BOM)
Worldwide Sales and Service .................................................................................... 50
2018 Microchip Technology Inc.
DS20005939A-page 4
DM160232 SERIAL MEMORY
SINGLE-WIRE EVALUATION KIT
USER’S GUIDE
Preface
NOTICE TO CUSTOMERS
All documentation becomes dated, and this manual is no exception. Microchip tools and
documentation are constantly evolving to meet customer needs, so some actual dialogs
and/or tool descriptions may differ from those in this document. Please refer to our website
(www.microchip.com) to obtain the latest documentation available.
Documents are identified with a “DS” number. This number is located on the bottom of each
page, in front of the page number. The numbering convention for the DS number is
“DSXXXXXXXXA”, where “XXXXXXXX” is the document number and “A” is the revision level
of the document.
For the most up-to-date information on development tools, see the MPLAB
®
IDE online help.
Select the Help menu, and then Topics to open a list of available online help files.
INTRODUCTION
This chapter contains general information that will be useful to know before using the
DM160232 Serial Memory Single-Wire Evaluation Kit. Items discussed in this chapter
include:
•
•
•
•
•
•
Document Layout
Conventions Used in This Guide
Recommended Reading
The Microchip Website
Customer Support
Revision History
DOCUMENT LAYOUT
This document describes how to use the DM160232 Serial Memory Single-Wire
Evaluation Kit as a tool to demonstrate the best in class features, functionality, and
low-power operation of the AT21CS Series single-wire Serial EEPROM devices.
The document is organized as follows:
•
•
•
•
•
•
•
Chapter 1. “Product Overview”
Chapter 2. “Installation and Operation”
Chapter 3. “Graphical User Interface (GUI)”
Chapter 4. “USB Base Board Firmware Upgrade”
Chapter 5. “Troubleshooting Guide”
Appendix A. “Schematics”
Appendix B. “Bill of Materials (BOM)”
2018 Microchip Technology Inc.
DS20005939A-page 5
Embedded System
京公网安备 11010802033920号
EEWORLD
