New Product Release
Surface Mount Ceramic Chip Capacitors
Extended Values 1206, X7R Dielectric, 25, 50, 100, 200 Volts
25 Volts – 1.2µF - 1.5 µF
50 Volts – 0.27µF - 0.68µF
100 Volts – 0.27µF - 0.39µF
200 Volts – 27,000pF - 150,000pF
Outline Drawings
Table 1 - Dimensions - Millimeters
EIA
Metric Size
Size Code Code (Ref)
1206*
3216
L#
Length
3.2 (.126) ± 0.2 (.008)
W#
Width
1.6 (.063) ± 0.2 (.008)
Thickness
B
Bandwidth
0.5 (.02) ± .25 (.010)
S
Min. Separation
N/A
Mounting
Technique
Solder Wave or
Solder Reflow
See Table 2
Table 2 - Ratings & Part Number Listing
Cap Values
1.2µF
1.5µF
0.27µF
0.33µF
0.39µF
0.47µF
0.56µF
0.68µF
0.27µF
0.33µF
0.39µF
27,000pF
33,000pF
39,000pF
47,000pF
56,000pF
68,000pF
82,000pF
100,000pF
120,000pF
150,000pF
KEMET Part Number
C1206C125(1)3RAC
C1206C155(1)3RAC
C1206C274(1)5RAC*
C1206C334(1)5RAC*
C1206C394(1)5RAC*
C1206C474(1)5RAC*
C1206C564(1)5RAC*
C1206C684(1)5RAC*
C1206C274(1)1RAC
C1206C334(1)1RAC
C1206C394(1)1RAC
C1206C273(1)2RAC
C1206C333(1)2RAC
C1206C393(1)2RAC
C1206C473(1)2RAC
C1206C563(1)2RAC
C1206C683(1)2RAC
C1206C823(1)2RAC
C1206C104(1)2RAC
C1206C124(1)2RAC
C1206C154(1)2RAC
Capacitance Tolerance Thickness - mm Qty 7” Reel Qty 13” Reel
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
J,K,M
1.60 ± 0.15
1.60 ± 0.15
.90 ± .10
.90 ± .10
.90 ± .10
.90 ± .10
.90 ± .10
1.00 ± 0.10
1.25 ± 0.15
1.60 ± 0.15
1.60 ± 0.15
.78 ± .10
.78 ± .10
.78 ± .10
1.00 ± 0.10
1.00 ± 0.10
1.00 ± 0.10
1.00 ± 0.10
1.25 ± 0.15
1.25 ± 0.15
1.60 ± 0.15
2,000
2,000
4,000
4,000
4,000
4,000
4,000
2,500
2,500
2,000
2,000
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,500
2,000
8,000
8,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
8,000
8,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
10,000
8,000
To complete the KEMET part number, insert capacitance tolerance: J - ±5%, K - ±10% or M ±20%.
* X7R Dielectric - Extended Range Values - Cap and DF measured at 0.5 Vrms.
F3274A 04/05
Electrical Parameters
As detailed in the KEMET Surface Mount Catalog F3102 for X7R, with following specific requirements based on
room temperature (25°C) parameters:
• Operating Range: -55°C to +125°C, with no-bias capacitance shift limited to ± 15% over that range
• Insulation Resistance (IR) measured after 2 minutes at rated voltage @ 25°C: Limit is 1000
megohm microfarads or 100 gigohms, whichever is less.
• Capacitance and Dissipation Factor (DF) measured at 1KHz at 1.0Vrms.
25 Volts - DF Limit is 3.5%
>
25 Volts - DF Limit is 2.5%
Soldering Process
Wave soldering or reflow soldering is acceptable for these chips.
Marking
These chips are normally supplied unmarked. If required, they can be laser marked as an extra cost option.
In general, the information in the KEMET Surface Mount catalog F3102 applies to these capacitors. The information in
this bulletin supplements that in the catalog.
© KEMET Electronics Corporation • P.O. Box 5928 • Greenville, SC 29606 • (864) 963-6682 • www.kemet.com
京公网安备 11010802033920号
EEWORLD
