EEWORLDEEWORLDEEWORLD

Part Number

Search

C052C109F1R5TA

Description
CERAMIC MOLDED/AXIAL & RADIAL - STANDARD
File Size135KB,10 Pages
ManufacturerKEMET
Websitehttp://www.kemet.com
Download Datasheet View All

C052C109F1R5TA Overview

CERAMIC MOLDED/AXIAL & RADIAL - STANDARD

CERAMIC MOLDED AXIAL & RADIAL
PERFORMANCE CHARACTERISTICS
GENERAL
Working Voltage:
C0G – 50, 100 & 200 Volts
X7R – 50, 100 & 200 Volts
Temperature Characteristics:
C0G – 0 ±30 PPM/°C from -55°C to +125°C
X7R – ±15% from -55°C to +125°C
Capacitance Tolerance:
C0G – ±0.5 pF, ±1%, ±2%, ±5%, ±10%, ±20%
(±0.5 pF is tightest available tolerance)
X7R – ±10%, ±20%, -0 +100%, -20% +80%
Construction:
Monolithic block of ceramic dielectric with interdigitated
internal electrodes, encapsulated in a molded case, and
having axial or radial leads. Meets flame test requirements
of UL Standard 94V-0.
Terminal Strength:
EIA-198 Method 303 Condition A (2.2 kg)
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current
limited to 50 mA.
ENVIRONMENTAL
Moisture Resistance:
MIL-STD-202, Method 106, or EIA-198, Method 204,
Condition A, except 20 cycles.
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current
limited to 50 mA.
Immersion Cycling:
MIL-STD-202, Method 104, Condition B. Post-Test limits
at 25°C are:
Insulation Resistance:
C0G – 10K megohms or 100 megohm - µF, whichever
is less
X7R – 10K megohms or 100 megohm - µF, whichever
is less
Solderability:
MIL-STD-202, Method 208, Sn62 solder, 245°C for 5 ±1/2
seconds.
Resistance to Soldering Heat:
MIL-STD-202, Method 210, Condition B (260°C, 10 secs).
Depth of immersion — to a minimum of .050" from the
capacitor body.
Lead Material:
Axial: Solder-coated copper clad steel
Radial: Solder-coated copper standard; 100% tin plated optional
ELECTRICAL
Capacitance:
Within specified tolerance when measured with 1 volt rms
at 1 kHz (1000 pF or less at 1 MHz for C0G).
Dissipation Factor:
25°C at 1 kHz (1000 pF or less at 1 MHz for C0G).
C0G – .15% maximum
X7R – 2.5% maximum
Insulation Resistance:
After 2 minutes electrification at 25°C and rated voltage
C0G – 100K megohms or 1000 megohm - µF, whichever
is less.
X7R – 100K megohms or 1000 megohm - µF, whichever
is less.
Dielectric Withstanding Voltage:
250% of rated voltage for 5 seconds with current limited
to 50 mA at 25°C.
Life Test:
2000 hours at 200% of rated voltage at 125°C. Post-Test
limits at 25°C are:
Capacitance Change:
C0G – less than 3% or 0.25 pF, whichever is higher
X7R – ±20% of initial value
Dissipation Factor:
C0G – .25% maximum
X7R – 3.0% maximum
20
© KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300
High-speed signal integrity issues
[size=5]The right side of the picture is the photoelectric conversion module, and the left side is the processor differential signal input and output terminal. The signal rate is 10G/s. There are the ...
dlcnight PCB Design
Does the IAR version support both MSP430 and ARM?
Does the IAR version support both MSP430 and ARM? Can IAR for MSP430 and IAR for ARM or install both versions on the same computer? Are there any conflicts?...
xiaoyal stm32/stm8
The GPS data stored in the eeprom is out of order after being read out
45 characters are stored, including time, date, latitude, longitude, speed and direction. All kinds of data can be read out....
那是我的最爱 Real-time operating system RTOS
Regarding the issue of multiple devices sharing a single physical interrupt.
Hey, I've seen some replies from Paul and Chao on the sharing interruption in the forum before, and I also saw them when I was looking at the WiFi driver just now. Now I'm posting a thread to discuss ...
kmmmmy Embedded System
Highly accurate measurement of the height of pure water in a glass tube with an error of 0.1 mm
0.15mm wall thickness, 0.3mm-1.0cm wall thickness glass tube, what method can accurately measure the height of pure water in the glass tube with an error of 0.1mm, [email]muj189@163.com[/email], thank...
muj189 Sensor
The second season of TI Wireless Carnival is about to begin, so stay tuned!!!
Good news, good news, friends who love wireless are blessed! :victory: [size=5][color=#0000ff]Wireless Carnival Season 2: TI wireless development board promotion is about to start! [/color][/size] [si...
EEWORLD社区 Wireless Connectivity

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

Robot
development
community

Index Files: 2142  2091  2420  2305  1591  44  43  49  47  33 
Datasheet   0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
Room 1530, 15th Floor, Building B, No. 18 Zhongguancun Street, Haidian District, Beijing Telephone: (010) 82350740 Postal Code: 100190
Copyright © 2005-2026 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号