1SP0335x2xx-FZ200R65KF2
1SP0335x2xx-FZ200R65KF2
Preliminary Data Sheet
Compact, high-performance, plug-and-play single-channel IGBT driver based
on SCALE-2 technology for individual and parallel-connected modules in
2-level, 3-level and multilevel converter topologies
Abstract
The SCALE-2 plug-and-play driver 1SP0335x2xx-FZ200R65KF2 is a compact single-channel intelligent gate
driver designed for Infineon’s IGBTs FZ200R65KF2 and FD200R65KF2-K. The master driver 1SP0335x2Mx-
FZ200R65KF2 features a fiber-optic interface. It can be used as stand-alone driver or in conjunction with up to
three 1SP0335D2Sx-FZ200R65KF2 slaves to drive up to four parallel-connected IGBT modules of type
FZ200R65KF2 or FD200R65KF2-K.
The DC/DC power supply must be purchased as a separate unit (one per master driver).
For drivers adapted to other types of high-power and high-voltage IGBT modules, refer to:
www.IGBT-Driver.com/go/plug-and-play
Features
Applications
Plug-and-play solution
Allows parallel connection of IGBT modules
For 2-level, 3-level and multilevel topologies
Fiber-optic links (master)
Built-in interface to 1SP0335D2Sx (slave)
Duty cycle 0...100%
Dynamic Advanced Active Clamping DA C
Dynamic IGBT short-circuit protection
Monitoring of supply voltage
Monitoring of gate voltage
Extremely reliable; long service life
Shortens application development time
Suitable for FZ200R65KF2 and FD200R65KF2-K
2
Traction
Railroad power supplies
Light rail vehicles
HVDC
Flexible AC transmission systems (FACTS)
Medium-voltage converters
Industrial drives
Wind-power converters
Medical applications
Research
And many others
Page 1
IGBT-Driver.com
1SP0335x2xx-FZ200R65KF2
Preliminary Data Sheet
Safety Notice!
The data contained in this data sheet is intended exclusively for technically trained staff. Handling all high-
voltage equipment involves risk to life. Strict compliance with the respective safety regulations is mandatory!
Any handling of electronic devices is subject to the general specifications for protecting electrostatic-sensitive
devices according to international standard IEC 60747-1, Chapter IX or European standard EN 100015 (i.e. the
workplace, tools, etc. must comply with these standards). Otherwise, this product may be damaged.
Important Product Documentation
This data sheet contains only product-specific data. For a detailed description, must-read application notes and
common data that apply to the whole series, please refer to the “Description & Application Manual for
1SP0335 SCALE-2 IGBT Drivers” on
www.IGBT-Driver.com/go/1SP0335.
When applying SCALE-2 plug-and-play drivers, please note that these drivers are specifically adapted to a
particular type of IGBT module. Therefore, the type designation of SCALE-2 plug-and-play drivers also includes
the type designation of the corresponding IGBT module. These drivers are not valid for IGBT modules other
than those specified. Incorrect use may result in failure.
Mechanical Dimensions
Dimensions: See the relevant “Description and Application Manual”
Mounting principle: see Note 28
Fiber-Optic Interfaces (1SP0335x2Mx)
Interface
Drive signal input
Drive signal input
Status output
Status output
Remarks
1SP0335V, fiber-optic receiver (Notes 1, 2)
1SP0335S, fiber-optic receiver (Notes 1, 2)
1SP0335V, fiber-optic transmitter (Notes 1, 3)
1SP0335S, fiber-optic transmitter (Notes 1, 3)
Part type #
HFBR-2522Z
HFBR-2412Z
HFBR-1522Z
HFBR-1412Z
Electrical Connectors
Interface
Power supply connector X1
Bus connectors X2 and X3
Remarks
On-board connector (Note 4)
On-board connectors (Note 5)
Part type #
214012
214013
Page 2
INTELLIGENT POWER ELECTRONICS
1SP0335x2xx-FZ200R65KF2
Preliminary Data Sheet
Absolute Maximum Ratings
Parameter
Supply voltage V
DC
Average supply current I
DC
Average supply current I
DC
Gate output power
Gate output power
Switching frequency F
Switching frequency F
Gate peak current I
out
DC-link voltage
Operating voltage
Max. emitter-emitter voltage
|dV/dt|
Max. interface current
Operating temperature
Storage temperature
Remarks
VDC to COM
1SP0335x2Mx only (Note 6)
1SP0335x2Mx with three 1SP0335D2Sx (Note 6)
1SP0335x2Mx, Ta < 70°C (Note 7)
1SP0335x2Mx, Ta = 85°C (Note 7)
1SP0335D2Sx, Ta < 70°C (Note 8)
1SP0335D2Sx, Ta = 85°C (Note 8)
1SP0335x2Mx, Ta < 70°C
1SP0335x2Mx, Ta = 85°C
1SP0335D2Sx, Ta < 70°C
1SP0335D2Sx, Ta = 85°C
Note 9
Switching operation (Note 10)
Off state (Note 11)
Collector-emitter voltage
Between parallel connected drivers (Note 12)
Between parallel connected drivers (Note 13)
X2 and X3, total RMS value (Note 14)
X2 and X3, total peak value (Note 14)
Min
0
Max
Unit
-35
-40
-40
30
V
215
mA
740
mA
3.5
W
2.5
W
3.3
W
2.3
W
15
kHz
15
kHz
15
kHz
15
kHz
+35
A
4400
V
5200
V
6500 V
peak
200 V
peak
50 kV/μs
4
A
rms
20
A
peak
+85
°C
+90
°C
Recommended Operating Conditions
Power Supply
Supply voltage V
DC
Remarks
To COM
Min
23.5
Typ
25
Max
26.5
Unit
V
IGBT-Driver.com
Page 3
1SP0335x2xx-FZ200R65KF2
Preliminary Data Sheet
Electrical Characteristics
All data refer to +25°C and V
DC
= 25V unless otherwise specified
Power Supply
Supply current I
DC
Power Supply Monitoring
Supply threshold V
iso
-V
ee
Monitoring hysteresis
Supply threshold V
ee
-V
COM
Monitoring hysteresis
Bus to 1SP0335D2Sx
Supply voltage
Turn-off command
Turn-on command
Gate Monitoring
Turn-on threshold V
GE,on,min
Turn-off threshold V
GE,off,max
Filter delay
Short-circuit Protection
Static Vce-monitoring threshold
Response time
Remarks
Without load, only 1SP0335x2Mx
Without load, per additional 1SP0335D2Sx
Remarks
Clear fault
Set fault (Note 15)
Set/clear fault
Clear fault
Set fault (Note 15)
Set/clear fault
Remarks
Min
12.1
11.5
0.35
5
4.7
0.15
Min
Min
Typ
45
20
Typ
12.6
12.0
5.15
4.85
Typ
VDC
0
15
Min
Typ
12.9
-7.6
28
42
Min
Typ
247
5.9
6
6.4
10.2
0.3
Min
Typ
190
185
Min
Typ
9
30
Max
Max
Max
Max
Max
13.1
12.5
5.3
5
Max
Max
Unit
mA
mA
Unit
V
V
V
V
V
V
Unit
V
V
V
Unit
V
V
μs
μs
Unit
V
μs
μs
μs
μs
μs
Unit
ns
ns
Unit
ns
ns
To COM
To COM
Remarks
G
mean
to E, set fault (Note 16)
G
mean
to E, set fault (Note 16)
Turn-on (Note 16)
Turn-off (Note 16)
Remarks
Between auxiliary terminals (Note 17)
DC-link voltage = 4400V (Note 18)
DC-link voltage = 3000V (Note 18)
DC-link voltage = 2200V (Note 18)
DC-link voltage = 1500V (Note 18)
After the response time (Note 19)
Remarks
Note 20
Note 20
Remarks
G to E (Note 21)
G to E (Note 21)
Delay to IGBT turn-off
Timing Characteristics
Turn-on delay t
d(on)
Turn-off delay t
d(off)
Timing Characteristics
Output rise time t
r(out)
Output fall time t
f(out)
Page 4
INTELLIGENT POWER ELECTRONICS
1SP0335x2xx-FZ200R65KF2
Preliminary Data Sheet
Timing Characteristics
Transmission delay of fault state
Delay to clear fault state
Remarks
Note 22
After IGBT short circuit (Note 23)
After gate-monitoring fault (Notes 23, 27)
Note 24
On host side
Remarks
Note 25
Note 25
Note 26
Note 26
Min
Typ
90
9
1
250
700
Typ
13.5
93
22
15
-10
Max
Unit
ns
μs
μs
ns
ns
Unit
Ω
Ω
nF
V
V
Acknowledge delay time
Acknowledge pulse width
Gate Output
Turn-on gate resistor R
g(on)
Turn-off gate resistor R
g(off)
Auxiliary gate capacitor C
ge
Gate voltage at turn-on
Gate-voltage at turn-off
Footnotes to the Key Data
1)
2)
3)
4)
5)
400
Min
1050
Max
6)
7)
8)
9)
10)
11)
The transceivers required on the host controller side are not supplied with the gate driver. It is
recommended to use the same types as used in the gate driver. For product information refer
to
www.IGBT-Driver.com/go/fiberoptics
The recommended transmitter current at the host controller is 20mA. A higher current may increase
jitter or delay at turn-off.
The typical transmitter current at the gate driver is 18mA. In case of supply undervoltage, the
minimum transmitter current at the gate driver is 12mA: this is suitable for adequate plastic optical
fibers with a length of more than 10 meters.
This refers to the manufacturer ordering number, see
www.igbt-driver.com/go/ext_erni.
The
customer-side connector as well as cables with different lengths can be supplied by CONCEPT. Refer
to the “Description & Application Manual for 1SP0335 SCALE-2 IGBT Drivers” for more information.
This refers to the manufacturer ordering number, see
www.igbt-driver.com/go/ext_erni.
These
connectors are to be used to connect 1SP0335x2Mx (master) or 1SP0335D2Sx (slave) to
1SP0335D2Sx (slave) if parallel connection of IGBT modules is required. Cables with different lengths
can be supplied by CONCEPT. Refer to the “Description & Application Manual for 1SP0335 SCALE-2
IGBT Drivers” for more information.
If the specified value is exceeded, this indicates a driver overload. It should be noted that the driver is
not protected against overload.
The given power can only be fully exploited without slaves 1SP0335D2Sx (no parallel connection of
IGBT modules). If the specified value is exceeded, this indicates a driver overload. It should be noted
that the driver is not protected against overload. From 70°C to 85°C, the maximum permissible output
power can be linearly interpolated from the given data.
The given power can be fully exploited with slaves 1SP0335D2Sx (parallel connection of IGBT
modules). If the specified value is exceeded, this indicates a driver overload. It should be noted that
the driver is not protected against overload. From 70°C to 85°C, the maximum permissible output
power can be linearly interpolated from the given data.
The gate current is limited by the gate resistors located on the driver.
This limit is due to active clamping under switching conditions. Refer to the “Description & Application
Manual for 1SP0335 SCALE-2 IGBT Drivers”.
Due to the Dynamic Active Advanced Clamping Function (DA
2
C) implemented on the driver, the DC-
link voltage can be increased in the off-state condition (e.g. after emergency shut-down). This value is
only valid when the IGBTs are in the off state (not switching). The time during which the voltage can
be applied should be limited to short periods (< 60 seconds). Refer to the “Description & Application
Manual for 1SP0335 SCALE-2 IGBT Drivers”.
Page 5
IGBT-Driver.com
Electronics Design Contest
京公网安备 11010802033920号
EEWORLD
