SST and AST
Self-sealing heat-shrinkable tubing
Fax-on-Demand:
(800) 260-9099
(650) 361-6523
Before ordering check with
factory for most current data.
FAX ID
2290
Description
Data sheet
Applications
SST and AST provide a simple, positive splice-sealing method
that offers protection under adverse environmental conditions.
Tubing supplied with standard sealant provides water sealing
and environmental protection in wet or underground applica-
tions. The thermoplastic adhesive not only seals, but also pro-
vides mechanical strain relief. The polymer tubing has excellent
insulating, abrasion-resisting, and strain-relief properties.
Features/Benefits
•
Strain relief.
•
Waterproofing.
•
Thick-wall insulation and abrasion-protection.
•
No need for greases, tape, or epoxy.
•
Expansion ratios as high as 3:1.
•
Availability in flame-retardant material.
•
AST-FR has the following agency approvals:
—ABS (American Bureau of Shipping)
—DNV (Det Norske Veritas)
—Lloyd’s (Lloyd’s Register of Shipping)
Installation
Minimum shrink temperature: 90°C
Minimum full recovery temperature: 121°C
Specifications/Approvals
®
®
Series
SST
SST-FR
UL
CSA
Military
MIL-DTL-23053/15A*,
Class 1 and Class 2
Industry
AST-FR
AST
*Formerly MIL-I-23053/I5A.
ASTM D 685, nonburning
ASTM D 2863, oxygen index
IPCEA S-19-81, cable insulation and jackets
IEEE-383 Section 2.5 massive flame vertical tray
ABS, DNV, Lloyd’s Register
RW 2017
RW 2011
Raychem
Nemosyne 90
Nemosyne FR
Product Dimensions
(inches)
Mil-Spec
approved
part number
†
SST*-03
SST*-04
SST*-07M
SST*-07
SST*-11M
SST*-11
SST*-13M
SST*-13
SST*-15M
SST*-15
SST*-17M
SST*-17
SST*-20M
SST*-20
SST*-27
SST*-30
SST*-40
SST*-45
†
In
Agency
approved
part number
AST 8/3
AST 10/4
AST 19/6(M)
AST 19/6
AST 33/10(M)
AST 33/10
AST 43/13(M)
AST 43/13
AST 51/19(M)
AST 51/19
AST 69/23
AST 76/32
AST 114/45
Standard
nominal
length
6
6
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
6, 9, 12
12, 18, 24
12, 18, 24
12, 18, 24
12, 18, 24
Internal diameter
Minimum
Maximum
expanded recovered
0.300
.100
0.400
.150
0.750
.220
0.750
.220
1.100
.375
1.100
.375
1.300
.375
1.300
.375
1.500
.500
1.500
.500
1.700
.500
1.700
.500
2.000
.750
2.000
.750
2.700
.900
3.000
1.250
4.000
1.750
4.500
1.750
Wall thickness (nominal)
Expanded
.025
.025
.020
.030
.030
.040
.025
.035
.035
.050
.030
.045
.040
.050
.050
.050
.050
.050
Recovered
††
.060
.060
.060
.095
.105
.120
.105
.120
.120
.140
.120
.140
.120
.155
.155
.155
.155
.155
Recommended cable
range for 600-volt cable
#18 through #14 AWG
#14 through #10 AWG
#8 through #1 AWG
#8 through #1 AWG
#2 through #4/0 AWG
#2 through #4/0 AWG
#2 through #4/0 AWG
#2 through #4/0 AWG
#2/0 AWG through 500 MCM
#2/0 AWG through 500 MCM
#2/0 AWG through 500 MCM
#2/0 AWG through 500 MCM
#350 MCM through 1000 MCM
#350 MCM through 1000 MCM
#500 MCM through 1250 MCM
#900 MCM through 1500 MCM
#1500 MCM through 2500 MCM
#1500 MCM through 2500 MCM
place of asterisk* substitute length of tubing to be ordered. For example, SST*-11, as the third column indicates, comes in 6-, 9-, and 12-inch lengths, so 9-inch SST tubing would be
SST 9-11. The suffix M = medium-wall tubing.
††
Wall thickness will be less if tubing recovery is restricted during shrinkage.
3-42
Tubing
R
Users should independently evaluate the suitability of the product for their application.
Ordering Information
Color
Size selection
Standard packaging
Ordering description
Adhesive sealant
Standard
Black (-0)
Always order the largest size that will shrink snugly over the component to be covered.
Special order sizes are available upon request.
See Product Dimensions table.
Specify product name, size, and color (for example, SRFR 10/6-8).
Standard
Nonstandard
All lengths supplied with continuous coating.
Lengths can be ordered with coating on ends only.
Part Numbering System
Mil-Spec Approved Part Numbers
Standard thick-wall, standard sealant, non-flame-retardant: No suffix added. (Does not meet Mil-Spec.)
SST 6-11
Size (expanded I.D. in inches and/or tenths of an inch)
Length in inches
Standard thick-wall, thermoplastic adhesive, non-flame-retardant: Add suffix /97. (Does not meet Mil-Spec.)
SST 6-11 /97
Thermoplastic adhesive
Flame-retardant* thick-wall with thermoplastic adhesive: Add suffix FR.
SST 6-11 FR
Flame-retardant material (not available in clear)
*Flame-retardant tubing will be supplied with thermoplastic adhesive unless specified differently upon order.
Agency Approved Part Numbers
AST
33/10
(M) 030 /97 -0
Color
0 = Black (standard color)
Other colors available on special order:
2 = Red 9 = White X = Clear*
*AST-FR is not available in clear.
Precoat adhesive/sealant options
/97 = Hot-melt adhesive (standard)
/226 = Mastic sealant
Standard length options
015 = 150 mm (6 inches)
045 = 450 mm (18 inches)
030 = 300 mm (12 inches)
060 = 600 mm (24 inches)
Medium-wall tubing (option)
Size
(nominal expanded and recovered internal diameter)
Product Description
AST = Adhesive sealing tubing
AST-FR = Adhesive sealing tubing, flame-retardant
Users should independently evaluate the suitability of the product for their application.
R
Tubing
3-43
京公网安备 11010802033920号
EEWORLD
