828BP4/5-3 datasheet, PDF - EEWORLD Datasheet

Datasheet> All Categories > filter> Active filter> 828BP4/5-3

828BP4/5-3: DescriptionDigital Filter, CMOS,; Categoryfilter Active filter; File Size492KB，8 Pages; ManufacturerFrequency Devices

Download Datasheet Parametric Compare View All

828BP4/5-3 Overview

Digital Filter, CMOS,

828BP4/5-3 Parametric

Parameter Name	Attribute value
Is it Rohs certified?	incompatible
Maker	Frequency Devices
package instruction	XMA, MODULE,14LEAD,1.8
Reach Compliance Code	unknown
JESD-30 code	S-XXMA-P14
length	50.8 mm
Maximum negative supply voltage (Vsup)	-18 V
Negative supply voltage minimum (Vsup)	-12 V
Nominal Negative Supply Voltage (Vsup)	-15 V
Number of functions	1
Number of terminals	14
Maximum operating temperature	70 °C
Minimum operating temperature
Package body material	UNSPECIFIED
encapsulated code	XMA
Encapsulate equivalent code	MODULE,14LEAD,1.8
Package shape	SQUARE
Package form	MICROELECTRONIC ASSEMBLY
Maximum seat height	13.2 mm
Maximum supply current (Isup)	40 mA
Maximum supply voltage (Vsup)	18 V
Minimum supply voltage (Vsup)	12 V
Nominal supply voltage (Vsup)	15 V
surface mount	NO
Temperature level	COMMERCIAL
Terminal form	PIN/PEG
Terminal pitch	5.08 mm
Terminal location	UNSPECIFIED
width	50.8 mm
Base Number Matches	1

Preview

Download Datasheet

View All

828BP & 828BR Series

Band Pass and Band Reject

Description:

The 828BP and 828BR Series are 4-pole-pair

digitally programmable band-pass and band-reject

(notch) active filters. These new filters take

advantage of the company’s proprietary designs

using surface-mount technology to provide a low

profile, compact package in minimal board space.

828BP and 828BR filters are factory tuned to one of

three factory set tuning ranges or 8-bit custom

ranges from 1 Hz to 25.6 kHz. Each filter type

features a near theoretical amplitude/phase

response along with low output voltage noise

enabling these filters to achieve a 10,000:1 or better

dynamic signal range

Pretuned to within ±2% of the center frequency,

band-pass 828BP filters pass all frequencies lying

between the upper and lower -3 dB points of the

amplitude response curve, while 828BR band-reject

(notch) filters sharply attenuate those frequencies

that are bound and defined by the bottom of the

notch. Available Q’s for 828BP models are 1, 2, 5, or

10 and 828BR filters are 3 or 10.

Features/Benefits:

• Compact 2.0"L x 2.0"W footprint minimizes board

space requirements.

• Plug-in ready-to-use, reducing engineering design

and manufacturing cycle time.

• Factory tuned, no external clocks or adjustments

needed.

• Broad range of center frequencies to meet a wide

range of applications.

Applications

• Power line interference rejection

• Transducer output filtering

• Production test instrumentation

• Medical electronics equipment and research

• Comb filtering and equalization

• Noise and harmonic analysis

• RMS measurements

• Frequency spectrum analysis

8 Bit Programmable

4-Pole Pair Filters

Programmable Specifications:

. . . . . . . . . . . .Page

Digital Tuning & Control . . . . . . . . . . . . . . . . . . . . .2

Available Band-Pass Models:

828BP4

4 pole pair . . . . . . . . . . . . . . . . . . .3

Available Band-Reject Models:

828BR4

4-pole pair . . . . . . . . . . . . . . . . . . .3

General Specifications:

Ordering Information . . . . . . . . . . . . . . . . . . . . . . .4

Pin-Out/package data . . . . . . . . . . . . . . . . . . . . . .4

25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839

e-mail: sales@freqdev.com • Web Address: http://www.freqdev.com

Product Handling

Procedure

Programmable Filter Modules Power Sequence & ESD

November 2000

Programmable Filters Modules

818, 824, 828, 828BP, 828BR, 854, 858, R854, R858

I. Scope

The following precautions are necessary when handling and installing Frequency Devices

programmable filter modules.

II. Digital Circuit Description

The digital input pins connect directly to 4000 series CMOS logic, such as the 4053 analog switch. The

power supply (Vss) for the digital logic on the module comes directly from the +15 Volt pin on the

module. This sets the threshold voltage at 11.0 V minimum to 15.0 V maximum for a "1" (High) level

and 0.0 V minimum to 4.0 V maximum for a "0" (Low) level. Applying a voltage between 4.0 and 11.0

V will produce unpredictable operation. Connecting 5 Volt or 3.3 V logic devices directly to the filter

module without using a voltage translator will result in erratic operation of the filter.

III. (VERY IMPORTANT) Power-Up and Power-Down Sequence

Do not plug-in or un-plug module while power is applied.

It is imperative that power is

supplied to the + 15 V pin on the filter module before or at the same instance that any digital pin is

pulled High (> 0.0 V). Failure to do this will result in excessive current flowing through the digital input

pin and through a protection diode internal to the 4000 logic, which will result in damage to the module.

The proper power-up and power-down sequence is:

1. Connect filter module ground.

2. Connect filter module +15 V.

3. Connect filter module -15 V.

4. Connect the input signal.

All four of the above steps can also occur simultaneously. Power-down should occur in the reverse

order.

IV. ESD Issues

Like most modern electronic equipment, the modules can be damaged by electrostatic discharge (ESD).

The modules are shipped from the factory in sealed, anti-static packaging and should be kept in the

sealed package prior to mounting on a circuit board. The following additional rules should also be

observed when handling the modules after they are removed from the factory packaging:

1. Only a person wearing a properly grounded wrist strap should handle the modules.

2. Any work surface that the modules are placed on must be properly ESD grounded.

3. Any insulating materials capable of generating static charge (such as paper) should be kept

away from the modules.

Static generating clothing should be covered with an ESD-protective smock.

25 Locust St, Haverhill, Massachusetts 01830 • Tel: 800/252-7074, 978/374-0761 • FAX: 978/521-1839

e-mail: sales@freqdev.com • Web Address: http://www.freqdev.com

828BP4/5-3 Related Products

	828BP4/5-3	828BR	828BP4/1-3	828BP4/1-4	828BP4/10-2	828BP4/5-4
Description	Digital Filter, CMOS,	Active Filter,	Digital Filter, CMOS,	Digital Filter, CMOS,	Digital Filter, CMOS,	Digital Filter, CMOS,
Is it Rohs certified?	incompatible	incompatible	incompatible	incompatible	incompatible	incompatible
Maker	Frequency Devices	Frequency Devices	Frequency Devices	Frequency Devices	Frequency Devices	Frequency Devices
package instruction	XMA, MODULE,14LEAD,1.8	,	XMA, MODULE,14LEAD,1.8	XMA, MODULE,14LEAD,1.8	XMA, MODULE,14LEAD,1.8	XMA, MODULE,14LEAD,1.8
Reach Compliance Code	unknown	unknown	unknown	unknown	unknown	unknown
Base Number Matches	1	1	1	1	1	1
JESD-30 code	S-XXMA-P14	-	S-XXMA-P14	S-XXMA-P14	S-XXMA-P14	S-XXMA-P14
length	50.8 mm	-	50.8 mm	50.8 mm	50.8 mm	50.8 mm
Maximum negative supply voltage (Vsup)	-18 V	-	-18 V	-18 V	-18 V	-18 V
Negative supply voltage minimum (Vsup)	-12 V	-	-12 V	-12 V	-12 V	-12 V
Nominal Negative Supply Voltage (Vsup)	-15 V	-	-15 V	-15 V	-15 V	-15 V
Number of functions	1	-	1	1	1	1
Number of terminals	14	-	14	14	14	14
Maximum operating temperature	70 °C	-	70 °C	70 °C	70 °C	70 °C
Package body material	UNSPECIFIED	-	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED
encapsulated code	XMA	-	XMA	XMA	XMA	XMA
Encapsulate equivalent code	MODULE,14LEAD,1.8	-	MODULE,14LEAD,1.8	MODULE,14LEAD,1.8	MODULE,14LEAD,1.8	MODULE,14LEAD,1.8
Package shape	SQUARE	-	SQUARE	SQUARE	SQUARE	SQUARE
Package form	MICROELECTRONIC ASSEMBLY	-	MICROELECTRONIC ASSEMBLY	MICROELECTRONIC ASSEMBLY	MICROELECTRONIC ASSEMBLY	MICROELECTRONIC ASSEMBLY
Maximum seat height	13.2 mm	-	13.2 mm	13.2 mm	13.2 mm	13.2 mm
Maximum supply current (Isup)	40 mA	-	40 mA	40 mA	40 mA	40 mA
Maximum supply voltage (Vsup)	18 V	-	18 V	18 V	18 V	18 V
Minimum supply voltage (Vsup)	12 V	-	12 V	12 V	12 V	12 V
Nominal supply voltage (Vsup)	15 V	-	15 V	15 V	15 V	15 V
surface mount	NO	-	NO	NO	NO	NO
Temperature level	COMMERCIAL	-	COMMERCIAL	COMMERCIAL	COMMERCIAL	COMMERCIAL
Terminal form	PIN/PEG	-	PIN/PEG	PIN/PEG	PIN/PEG	PIN/PEG
Terminal pitch	5.08 mm	-	5.08 mm	5.08 mm	5.08 mm	5.08 mm
Terminal location	UNSPECIFIED	-	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED	UNSPECIFIED
width	50.8 mm	-	50.8 mm	50.8 mm	50.8 mm	50.8 mm

Recommended Resources

Printing factory speed printing machine circuit

Three-phase four-wire TN-C bus connected dual power conversion circuit

One of the incandescent lamp dimming circuits using thyristors a

Four color light circuit

Simple three-stage tube isolated low-power switching regulated power supply circuit

TD-5 ultrasonic micro atomizing humidifier

Want to know how many days you have to work to buy an iPhone 6s? Oh my god, it takes 27 days in Beijing!: [p=30, null, left][color=rgb(51, 51, 51)][font=Arial,]On the morning of September 17, I immediately upgraded my phone to iOS 9. I decided not to buy an iPhone 6s, which is too expensive. Do you know? ...; maylove Talking

How to estimate the size of flash memory when programming: Developed using 430fg437, the on-chip flash size is 32K. How do I estimate the size of the flash occupied when programming?...; 尘海月 Microcontroller MCU

【IoT Graduation Project. Part 2】STM32+Gizwits AIoT+Laboratory Safety Monitoring System: Following the previous article, the content includes 1 system content, 2, component selection, 3, system hardware design, etc. Please refer to: https://club.gizwits.com/thread-166756-1-1.html4 System ...; 毛球大大 RF/Wirelessly

How to use the microcontroller counter?: The problem is this: the microcontroller can be used for timing and counting. Now I want to add a certain frequency pulse to the outside of the microcontroller (T0 port) and calculate this frequency t...; luchao114 MCU

Che Gao, Che Gao------ speechless: [[i] This post was last edited by dontium on 2012-12-5 22:05[/i]]...; dontium Talking

There are many errors in the KEIL5 pack. How to solve them?: The newly installed KEIL5 has many PACK errors, the refresh connection is very slow, and finally it gets stuck, and I still can't solve it. I wonder if anyone knows what's going on... The problem is s...; 风飘雪之林 stm32/stm8

Shortcut: 00 01 02 03 04 05 06 07 08 09 0A 0C 0F 0J 0L 0M 0R 0S 0T 0Z 10 11 12 13 14 15 16 17 18 19 1A 1B 1C 1D 1E 1F 1H 1K 1M 1N 1P 1S 1T 1V 1X 1Z 20 21 22 23 24 25 26 27 28 29 2A 2B 2C 2D 2E 2F 2G 2K 2M 2N 2P 2Q 2R 2S 2T 2W 2Z 30 31 32 33 34 35 36 37 38 39 3A 3B 3C 3D 3E 3F 3G 3H 3J 3K 3L 3M 3N 3P 3R 3S 3T 3V 40 41 42 43 44 45 46 47 48 49 4A 4B 4C 4D 4M 4N 4P 4S 4T 50 51 52 53 54 55 56 57 58 59 5A 5B 5C 5E 5G 5H 5K 5M 5N 5P 5S 5T 5V 60 61 62 63 64 65 66 67 68 69 6A 6C 6E 6F 6M 6N 6P 6R 6S 6T 70 71 72 73 74 75 76 77 78 79 7A 7B 7C 7M 7N 7P 7Q 7V 7W 7X 80 81 82 83 84 85 86 87 88 89 8A 8D 8E 8L 8N 8P 8S 8T 8W 8Y 8Z 90 91 92 93 94 95 96 97 98 99 9A 9B 9C 9D 9F 9G 9H 9L 9S 9T 9W

Popular Components