EXPOSED PAD (PIN 9) IS GND, MUST BE SOLDERED TO PCB
MS8E PACKAGE
8-LEAD PLASTIC MSOP
T
JMAX
= 150°C,
θ
JA
= 29°C/W TO 45°C/W,
θ
JC
= 5°C/W TO 10°C/W
EXPOSED PAD (PIN 9) IS GND, MUST BE SOLDERED TO PCB
orDer inForMaTion
LEAD FREE FINISH
LT3062EDCB#PBF
LT3062IDCB#PBF
LT3062HDCB#PBF
LT3062MPDCB#PBF
LT3062EMS8E#PBF
LT3062IMS8E#PBF
LT3062HMS8E#PBF
LT3062MPMS8E#PBF
LT3062EDCB-3.3#PBF
LT3062IDCB-3.3#PBF
LT3062EDCB-5#PBF
LT3062IDCB-5#PBF
TAPE AND REEL
LT3062EDCB#TRPBF
LT3062IDCB#TRPBF
LT3062HDCB#TRPBF
LT3062MPDCB#TRPBF
LT3062EMS8E#TRPBF
LT3062IMS8E#TRPBF
LT3062HMS8E#TRPBF
http://www.linear.com/product/LT3062#orderinfo
PART MARKING*
LGNC
LGNC
LGNC
LGNC
LTGND
LTGND
LTGND
LTGND
LGYX
LGYX
LGYY
LGYY
PACKAGE DESCRIPTION
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
8-Lead (2mm
×
3mm) Plastic DFN
TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–55°C to 150°C
–40°C to 125°C
–40°C to 125°C
–40°C to 150°C
–55°C to 150°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
LT3062MPMS8E#TRPBF
LT3062EDCB-3.3#TRPBF
LT3062IDCB-3.3#TRPBF
LT3062EDCB-5#TRPBF
LT3062IDCB-5#TRPBF
2
3062fa
For more information
www.linear.com/LT3062
LT3062 Series
orDer inForMaTion
LEAD FREE FINISH
LT3062EMS8E-3.3#PBF
LT3062IMS8E-3.3#PBF
LT3062EMS8E-5#PBF
LT3062IMS8E-5#PBF
TAPE AND REEL
LT3062EMS8E-3.3#TRPBF
LT3062IMS8E-3.3#TRPBF
LT3062EMS8E-5#TRPBF
LT3062IMS8E-5#TRPBF
http://www.linear.com/product/LT3062#orderinfo
PART MARKING*
LTGZG
LTGZG
LTGZF
LTGZF
PACKAGE DESCRIPTION
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
8-Lead Plastic MSOP
TEMPERATURE RANGE
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
–40°C to 125°C
Consult LTC Marketing for parts specified with wider operating temperature ranges. *The temperature grade is identified by a label on the shipping container.
For more information on lead free part marking, go to:
http://www.linear.com/leadfree/
For more information on tape and reel specifications, go to:
http://www.linear.com/tapeandreel/.
Some packages are available in 500 unit reels through
designated sales channels with #TRMPBF suffix.
The
l
denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C. (Note 3)
PARAMETER
Minimum Input Voltage (Note 4)
Regulated Output Voltage (Note 5)
CONDITIONS
I
LOAD
= 200mA
LT3062-3.3: V
IN
= 3.9, I
LOAD
= 1mA
LT3062-3.3: 3.9V < V
IN
< 45V, 1mA < I
LOAD
< 200mA
LT3062-5: V
IN
= 5.6, I
LOAD
= 1mA
LT3062-5: 5.6V < V
IN
< 45V, 1mA < I
LOAD
< 200mA
V
IN
= 2.1V, I
LOAD
= 1mA
2.1V < V
IN
< 45V, 1mA < I
LOAD
< 200mA (E-, I-Grades)
2.1V < V
IN
< 45V, 1mA < I
LOAD
< 200mA (MP-, H-Grades)
LT3062-3.3: ΔV
IN
= 3.9V to 45V (E-, I-Grades)
LT3062-5: ΔV
IN
= 5.6V to 45V (E-, I-Grades)
LT3062: ΔV
IN
= 2.1V to 45V (E-, I-Grades)
LT3062: ΔV
IN
= 2.1V to 45V (MP-, H-Grades)
Load Regulation (Note 4)
ΔI
LOAD
= 1mA to 200mA
LT3062-3.3: V
IN
= 3.9V (E-, I-Grades)
LT3062-5: V
IN
= 5.6V (E-, I-Grades)
LT3062: V
IN
= 2.1V (E-, I-Grades)
LT3062: V
IN
= 2.1V (MP-, H-Grades)
Dropout Voltage
V
IN
= V
OUT(NOMINAL)
(Notes 6, 7)
I
LOAD
= 1mA
I
LOAD
= 1mA
I
LOAD
= 10mA
I
LOAD
= 10mA
I
LOAD
= 100mA
I
LOAD
= 100mA
I
LOAD
= 200mA
I
LOAD
= 200mA
GND Pin Current
V
IN
= V
OUT(NOMINAL)
+ 0.6V
(Notes 6, 8)
I
LOAD
= 0
I
LOAD
= 1mA
I
LOAD
= 10mA
I
LOAD
= 100mA
I
LOAD
= 200mA
C
OUT
= 10µF, I
LOAD
= 200mA, C
REF/BYP
= 0.01µF
V
OUT
= 600mV, BW = 10Hz to 100kHz
l
l
l
l
l
l
l
l
l
l
l
l
l
l
elecTrical characTerisTics
MIN
3.267
3.234
4.950
4.900
594
588
585
TYP
1.6
3.3
5
600
600
600
1.6
3.1
0.5
7.1
7.6
0.3
65
130
MAX
2.1
3.333
3.366
5.050
5.100
606
612
612
22
33
4
6
28
39
4
9
110
180
180
270
290
430
360
530
90
120
500
4
10
UNITS
V
V
V
V
V
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
mV
µA
µA
µA
mA
mA
µV
RMS
ADJ Pin Voltage (Notes 4, 5)
Line Regulation (Note 4)
I
LOAD
= 1mA
l
250
l
300
l
l
l
l
l
l
45
70
225
2
5
30
Output Voltage Noise
3062fa
For more information
www.linear.com/LT3062
3
LT3062 Series
The
l
denotes the specifications which apply over the full operating
temperature range, otherwise specifications are at T
A
= 25°C. (Note 3)
PARAMETER
ADJ Pin Bias Current (Notes 4, 9)
Shutdown Threshold
SHDN
Pin Current (Note 10)
Quiescent Current in Shutdown
V
OUT
= Off to On
V
OUT
= On to Off
V
SHDN
= 0V
V
SHDN
= 45V
V
IN
= 45V, V
SHDN
= 0V
58
55
70
l
l
elecTrical characTerisTics
CONDITIONS
MIN
l
l
l
l
l
TYP
15
0.8
0.7
1.2
0.3
73
70
85
320
MAX
60
1.5
<1
3
1
UNITS
nA
V
V
µA
µA
µA
dB
dB
dB
mA
mA
0.3
Ripple Rejection
LT3062-3.3
V
IN
– V
OUT
= 1.5V (AVG), V
RIPPLE
= 0.5V
P-P
, LT3062-5
f
RIPPLE
= 120Hz, I
LOAD
= 200mA
LT3062 (Note 4)
Current Limit
Input Reverse Leakage Current
Reverse Output Current (Note 13)
V
IN
= 7V, V
OUT
= 0
V
IN
= V
OUT(NOMINAL)
+ 1V (Note 11), ΔV
OUT
= –5%
V
IN
= -45V, V
OUT
= 0
LT3062-3.3: V
OUT
= 3.3V, V
IN
= V
SHDN
= 0V
LT3062-5: V
OUT
= 5V, V
IN
= V
SHDN
= 0V
LT3062: V
OUT
= 1.2V, V
IN
= V
SHDN
= 0V
220
1
5.2
5.2
0.2
15
15
10
mA
µA
µA
µA
Note 1:
Stresses beyond those listed under Absolute Maximum Ratings
may cause permanent damage to the device. Exposure to any Absolute
Maximum Rating condition for extended periods may affect device
reliability and lifetime.
Note 2:
Absolute maximum input to output differential voltage is not
achievable with all combinations of rated IN pin and OUT pin voltages.
With the IN pin at 50V, the OUT pin may not be pulled below 0V. The total
measured voltage from IN to OUT must not exceed ±50V. If OUT is above
ground, do not pull IN more than 40V below OUT.
Note 3:
The LT3062 is tested and specified under pulse load conditions
such that T
J
≅
T
A
. The LT3062E regulators are 100% tested at T
A
= 25°C
and performance is guaranteed from 0°C to 125°C. Performance at
–40°C to 125°C is assured by design, characterization and correlation
with statistical process controls. The LT3062I regulators are guaranteed
over the full –40°C to 125°C operating junction temperature range. The
LT3062MP regulators are 100% tested over the –55°C to 150°C operating
junction temperature. The LT3062H regulators are 100% tested at the
150°C operating junction temperature. High junction temperatures degrade
operating lifetimes. Operating lifetime is derated at junction temperature
greater than 125°C.
Note 4:
The LT3062 adjustable version is tested and specified for these
conditions with the ADJ connected to the OUT pin.
Note 5:
Maximum junction temperature limits operating conditions. The
regulated output voltage specification does not apply for all possible
combinations of input voltage and output current. Limit the output current
range if operating at the maximum input voltage. Limit the input-to-output
voltage differential if operating at maximum output current. Current limit
foldback limits the maximum output current as a function of input-to-
output voltage. See Current Limit vs V
IN
– V
OUT
in the Typical Performance
Characteristics section.
Note 6:
To satisfy minimum input voltage requirements, the LT3062
adjustable version is tested and specified for these conditions with an
external resistor divider (bottom 60k, top 230k) for an output voltage of
2.9V. The external resistor divider adds 10µA of DC load on the output.
The external current is not factored into GND pin current.
Note 7:
Dropout voltage is the minimum input-to-output voltage
differential needed to maintain regulation at a specified output current. In
dropout, the output voltage equals: (V
IN
– V
DROPOUT
).
Note 8:
GND pin current is tested with V
IN
= V
OUT(NOMINAL)
+ 0.6V and a
current source load. GND pin current will increase in dropout. See GND
pin current curves in the Typical Performance Characteristics section. For
fixed voltage options, an internal resistor divider will add 5μA to the GND
pin current. See the GND Pin Current curves in the Typical Performance
Characteristics section.
Note 9:
ADJ pin bias current flows out of the ADJ pin.
Note 10:
SHDN
pin current flows into the
SHDN
pin.
Note 11:
To satisfy requirements for minimum input voltage, current limit
is tested at V
IN
= V
OUT(NOMINAL)
+ 1V or V
IN
= 2.1V, whichever is greater.
Note 12:
This IC includes thermal limit which protects the device during
momentary overload conditions. Junction temperature exceeds 125°C
(E-Grade and I-Grade) or 150°C (MP-Grade and H-Grade) when thermal
limit is active. Continuous operation above the specified maximum
junction temperature may impair device reliability.
Note 13:
Reverse output current is tested with the IN pin grounded and the
OUT pin forced to the specified voltage. This current flows into the OUT
I am quite interested in such an event: [Crowdfunding] Global Smart Wearable Industry Chain Product Show Season 3 and Carnival Although the ticket costs about 100 yuan, what do I want to know is, what...
STM8 is very popular online now, and the price is cheap. It is said that 128K flash is 20 yuan, but it is not easy to buy now. The price-performance ratio is good, and it is 5V. I downloaded the STM8 ...
While learning the digital system design Verilog hardware language from Xia Yuwen, I am a little confused about the design and understanding of pipelines. I would like to ask for advice from an expert...
According to foreign media reports, Ford Motor has applied to the U.S. Patent and Social Security Administration (USPTO) for a patent for a remote vehicle control system that may be used in future ...[Details]
With the booming electronics industry, vision systems have become a leader in the electronics automation sector. However, the delicate nature of electronic products often affects product yields due...[Details]
1. Equipment Overview
Shell-and-tube heat exchangers are a common heat exchange device used in chemical evaporation and heating equipment. Currently, the tubesheets of shell-and-tube heat exch...[Details]
Flip-chip and ball grid array (BGA) are two widely used packaging technologies in the electronics industry. Each has its own advantages and limitations, and in some cases, they can complement each ...[Details]
On August 24th, media outlets reported, citing sources, that NavInfo, a listed company on the A-share market, is nearing completion in its acquisition of the intelligent driving c...[Details]
Current Development Status of DVR Market
A DVR, or digital video recorder, uses a hard disk for recording, unlike traditional analog video recorders. It's often called a DVR because it's a com...[Details]
According to foreign media reports, BMW has just been granted a patent for a screen that could cover the entire roof. BMW hopes to transform at least a portion of the vehicle's headliner into a dis...[Details]
Zos Automotive Research Institute released the "2025
Smart Cockpit
Tier 1 Research Report (Domestic Edition)."
This report analyzes the operating conditions of more than a dozen ...[Details]
Since its invention in the mid-1940s, the microwave oven has evolved from a humble beginning to commercial use, entering homes in the 1960s and rapidly gaining popularity. Its basic functionality a...[Details]
In the electronics manufacturing industry, surface mount technology (SMT) placement machines are core equipment for production lines. However, with many different models available on the market, ch...[Details]
Tools/Materials
Yitong Chuanglian MODBUS to PROFIBUS Gateway YT-PB-03
Siemens s7-300
This article describes how to configure the YT-PB-03 MODBUS to PROFIBUS gat...[Details]
With growing environmental awareness, the continuous improvement of three-electric technology and the increasing deployment of infrastructure such as charging stations, the electrification of new e...[Details]
When American cartoonist Chester Gould sketched the watch on Dick Tracy's wrist, he had no idea that science fiction would become reality 70 years later. As a comic strip artist, Gould imagined fut...[Details]
introduction
With the development and widespread use of integrated circuits in power electronics design, electronic products are trending towards smaller sizes, more components, and greater fu...[Details]
0 Introduction
With a rapidly aging population, a young couple is now required to care for an increasing number of elderly people, leading to a growing difficulty in providing care for them. E...[Details]
Robotics Development
京公网安备 11010802033920号
EEWORLD
