DSPIC33EV128GM006-I/MR datasheet, PDF

Datasheet> All Categories > DSPIC33EV128GM006-I/MR

DSPIC33EV128GM006-I/MR: DescriptionDSPIC33EV128GM006-I/MR; File Size4MB，504 Pages; ManufacturerMicrochip; Websitehttps://www.microchip.com; Environmental Compliance

Download Datasheet Parametric View All

DSPIC33EV128GM006-I/MR Overview

DSPIC33EV128GM006-I/MR

DSPIC33EV128GM006-I/MR Parametric

Parameter Name	Attribute value
Is it Rohs certified?	conform to
Objectid	8089965512
package instruction	QFN-64
Reach Compliance Code	compliant
Country Of Origin	Thailand
ECCN code	3A991.A.2
YTEOL	7.5
Has ADC	YES
Address bus width
barrel shifter	YES
bit size	16
boundary scan	NO
maximum clock frequency	40 MHz
DAC channel	NO
DMA channel	YES
External data bus width
Format	FIXED POINT
Integrated cache	NO
Internal bus architecture	MULTIPLE
JESD-30 code	S-PQCC-N64
JESD-609 code	e3
length	9 mm
low power mode	YES
Humidity sensitivity level	3
Number of DMA channels	4
Number of external interrupt devices	3
Number of I/O lines	53
Number of terminals	64
Number of timers	7
On-chip data RAM width	8
On-chip program ROM width	8
Maximum operating temperature	85 °C
Minimum operating temperature	-40 °C
PWM channel	YES
Package body material	PLASTIC/EPOXY
encapsulated code	HVQCCN
Encapsulate equivalent code	LCC64,.35SQ,20
Package shape	SQUARE
Package form	CHIP CARRIER, HEAT SINK/SLUG, VERY THIN PROFILE
Peak Reflow Temperature (Celsius)	260
Certification status	Not Qualified
RAM (bytes)	8192
RAM (number of words)	8192
rom(word)	131072
ROM programmability	FLASH
Filter level	TS 16949
Maximum seat height	1 mm
speed	40 MHz
Maximum slew rate	350 mA
Maximum supply voltage	5.5 V
Minimum supply voltage	4.5 V
Nominal supply voltage	5 V
surface mount	YES
technology	CMOS
Temperature level	INDUSTRIAL
Terminal surface	MATTE TIN
Terminal form	NO LEAD
Terminal pitch	0.5 mm
Terminal location	QUAD
Maximum time at peak reflow temperature	40
width	9 mm
uPs/uCs/peripheral integrated circuit type	DIGITAL SIGNAL PROCESSOR, CONTROLLER

Preview

Download Datasheet

View All

dsPIC33EVXXXGM00X/10X FAMILY

16-Bit, 5V Digital Signal Controllers with

PWM, SENT, Op Amps and Advanced Analog Features

Operating Conditions

• 4.5V to 5.5V, 0°C to +85°C, DC to 70 MIPS

• 4.5V to 5.5V, -40°C to +125°C, DC to 60 MIPS

• 4.5V to 5.5V, -40°C to +150°C, DC to 40 MIPS

PWM

• Up to Six Pulse-Width Modulation (PWM) Outputs

(three generators)

• Primary Master Time Base Inputs allow

Time Base Synchronization from Internal/External

Sources

• Dead Time for Rising and Falling Edges

• 7.14 ns PWM Resolution

• PWM Support for:

- DC/DC, AC/DC, inverters, Power Factor

Correction (PFC) and lighting

- Brushless Direct Current (BLDC), Permanent

Magnet Synchronous Motor (PMSM),

AC Induction Motor (ACIM), Switched

Reluctance Motor (SRM)

- Programmable Fault inputs

- Flexible trigger configurations for

Analog-to-Digital conversion

- Supports PWM lock, PWM output chopping

and dynamic phase shifting

Core: 16-Bit dsPIC33E CPU

•

Code-Efficient (C and Assembly) Architecture

16-Bit Wide Data Path

Two 40-Bit Wide Accumulators

Single-Cycle (MAC/MPY) with Dual Data Fetch

Single-Cycle, Mixed-Sign MUL plus Hardware

Divide

32-Bit Multiply Support

Intermediate Security for Memory:

- Provides a Boot Flash Segment in addition to

the existing General Flash Segment

Error Code Correction (ECC) for Flash

Added Two Alternate Register Sets for Fast

Context Switching

•

Clock Management

Internal, 15% Low-Power RC (LPRC) – 32 kHz

Internal, 1% Fast RC (FRC) – 7.37 MHz

Internal, 10% Backup FRC (BFRC) – 7.37 MHz

Programmable PLLs and Oscillator Clock Sources

Fail-Safe Clock Monitor (FSCM)

Additional FSCM Source (BFRC), Intended to

Provide a Clock Fail Switch Source for the

System Clock

• Independent Watchdog Timer (WDT)

• System Windowed Watchdog Timer (DMT)

• Fast Wake-up and Start-up

•

Advanced Analog Features

• ADC module:

- Configurable as 10-bit, 1.1 Msps with

four S&H or 12-bit, 500 ksps with one S&H

- Up to 36 analog inputs

• Flexible and Independent ADC Trigger Sources

• Up to Four Op Amp/Comparators with Direct

Connection to the ADC module:

- Additional dedicated comparator and

7-bit Digital-to-Analog Converter (DAC)

- Two comparator voltage reference outputs

- Programmable references with 128 voltage

points

- Programmable blanking and filtering

• Charge Time Measurement Unit (CTMU):

- Supports mTouch

capacitive touch sensing

- Provides high-resolution time

measurement (1 ns)

- On-chip temperature measurement

- Temperature sensor diode

- Nine sources of edge input triggers (CTED1,

CTED2, OCPWM, TMR1, SYSCLK, OSCLK,

FRC, BFRC and LPRC)

Power Management

• Low-Power Management modes (Sleep, Idle

and Doze)

• Power Consumption Minimized Executing

NOP

String

• Integrated Power-on Reset (POR) and Brown-out

Reset (BOR)

• 0.5 mA/MHz Dynamic Current (typical)

• 50 µA at +25°C I

Current (typical)



2013-2018 Microchip Technology Inc.

DS70005144G-page 1

Recommended Resources

STK0049 audio IC circuit diagram

Z-33 switching regulated power supply circuit

CNC machine tool oscillation circuit

Simple nickel-cadmium battery charger circuit diagram using TWH8778

Use PC’s RS232 port to control LED lights

Low power instrument amplifier circuit

Acceptance criteria for LED electronic display screens: LED display is a very familiar display product in our daily life. As a common product with very important future development prospects, LED screens have demonstrated many functions and effects all ove...; my850824 LED Zone

6116.i2c_6713_example This example outputs the I2C waveform problem: Hello! This waveform is sent by the sample program. Why is there an extra 0x20 byte between the start flag and the first byte sent?...; DAFENG DSP and ARM Processors

Last 3 days: Apply for free evaluation of Fudan Micro FM33LC046N Demo board: Development board for this activity: FM33LC046N Demo board (5 in total) Source: Fudan Micro (started with smart meter MCU, has been deeply involved in the smart meter field for more than 20 years, wit...; EEWORLD社区 Domestic Chip Exchange

XX: I have a girl...; shirl Talking

Msp430f5529 routine doubts: int main(void) { WDTCTL = WDTPW + WDTHOLD; // Stop WDT P1DIR |= 0x01; // P1.0 output TA1CCTL0 = CCIE; // CCR0 interrupt enabled TA1CCR0 = 20000; TA1CTL = TASSEL_2 + MC_2 + TACLR; // SMCLK, contmode, c...; 大眼哥哥 Microcontroller MCU

Can an amplifier with dual-ended input be used with single-ended input?: The background is this. The existing circuit uses PAM8403 to drive a 3W 4-ohm speaker. This dual-ended input amplifier chip:A fixed voice chip is added to the original circuit. This chip directly outp...; freeelectron Analog electronics

Shortcut: E0 E1 E2 E3 E4 E5 E6 E7 E8 E9 EA EB EC ED EE EF EG EH EI EJ EK EL EM EN EO EP EQ ER ES ET EU EV EW EX EY EZ F0 F1 F2 F3 F4 F5 F6 F7 F8 F9 FA FB FC FD FE FF FG FH FI FJ FK FL FM FN FO FP FQ FR FS FT FU FV FW FX FY FZ G0 G1 G2 G3 G4 G5 G6 G7 G8 G9 GA GB GC GD GE GF GG GH GI GJ GK GL GM GN GO GP GQ GR GS GT GU GV GW GX GZ H0 H1 H2 H3 H4 H5 H6 H7 H8 HA HB HC HD HE HF HG HH HI HJ HK HL HM HN HO HP HQ HR HS HT HU HV HW HX HY HZ I1 I2 I3 I4 I5 I6 I7 IA IB IC ID IE IF IG IH II IK IL IM IN IO IP IQ IR IS IT IU IV IW IX J0 J1 J2 J6 J7 JA JB JC JD JE JF JG JH JJ JK JL JM JN JP JQ JR JS JT JV JW JX JZ K0 K1 K2 K3 K4 K5 K6 K7 K8 K9 KA KB KC KD KE KF KG KH KI KJ KK KL KM KN KO KP KQ KR KS KT KU KV KW KX KY KZ

Popular Components