3M
™
Eurosocket
.100
″
x .100″ Version, Type B (Rows A and B Filled)
•
•
•
•
•
62B64 Series
DIN 41612 compatible
High density (64 position)
Mates with DIN 41612 Type B headers
High reliability contact design
Can be daisy-chained or end terminated to flat
cable
• Optional strain relief with handle
• Available with or without mounting flanges
• See Regulatory Information Appendix (RIA)
for chemical compliance information
Date Modified: October 18, 2007
TS-0585-B
Sheet 1 of 3
Physical
Insulation
Material:
Glass Filled Polyester (PBT)
Flammability:
Color:
Contact
Material:
Plating:
Underplating and U-Slot:
Wiping Area:
UL 94V-0
Gray
Copper Alloy
50
μ″
[ 1.27
μm
] Nickel
See Ordering Information for specific plating
(For additional options see Ordering Information)
Wire Accommodation: Stranded or Solid: 26 & 28 AWG, Solid: 30 AWG
Marking:
3M Logo, Part Identification & Contact Position Numbers
Electrical
Current Rating:
1 A
Insulation Resistance:
> 1
×
10
9
Ω
at 500 V
DC
Withstanding Voltage:
1000 V
RMS
at Sea Level
Environmental
Temperature Rating:
-55°C to +105°C
UL File No.: E68080
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Eurosocket
.100
″
x .100″ Version, Type B (Rows A and B Filled)
86.10
[ 3.390 ]
62B64 Series
6.80
[ .268 ]
Optional Strain Relief
(To be used only with the 62B64-1000 version)
Material: Steel
86.4
[ 3.40 ]
8.00
[ .315 ]
10.95
[ .431 ]
1.27 Ref
[ .050 ]
Non-Conductive Transfer
Adhesive with Liner
1.27 Ref
[ .050 ]
11.60
[ .457 ]
Optional Mounting Flange
(See Ordering Information)
8.00
[ .315 ]
1.00
[ .039 ]
85.00
[ 3.346 ]
95.0
[ 3.74 ]
Position 32
6.75
[ .266 ]
6.00
[ .236 ]
B1
3.0
[ .12 ]
2.54 Ref
[ .100 ]
2.54 Ref
[ .100 ]
90.0
[ 3.54 ]
A1
mm
[Inch]
Tolerance Unless Noted
.0
mm
.00
.000
±
.3
±
.13
[ ] Dimensions for
Reference only
Note:
1. Position B1 is terminated to the first conductor of the ribbon cable.
Ordering Information
Socket
62B64-100XXX
Mounting Style
0 = without Mounting Flange
1 = with Mounting Flange
Strain Relief
(Order Separately)
3448-6201
Optional Plating:
EC = 30 µ" [0.76 µm] Au over 50 µ"-150 µ"
[1.27 µm-3.80 µm] Ni (RIA E1 & C1 Apply)
Blank = 20 µ" [0.51 µm] Au over 50 µ"-150 µ"
[1.27 µm-3.80 µm] Ni (RIA E1 & C1 Apply)
For-1000XXX
(no mtg flange)
version only
TS-0585-B
Sheet 2 of 3
.Assembly tools: 3M™ Press 3640 (or equivalent), 3M™ Locator Plate 3443-117, 3M™ Platen 3442-9
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
3M
™
Eurosocket
.100
″
x .100″ Version, Type B (Rows A and B Filled)
62B64 Series
78.74
[ 3.100 ]
7.96
[ .313 ]
Minimum spacing between
adjacent groups of posts when
using a strain relief
2.54
[ .100 ]
86.7
[ 3.413 ]
7.62
[ .300 ]
2.54
[ .100 ]
Minimum spacing between
adjacent groups of posts
Minimum space required for
connector and cable
8.2
[ .323 ]
Recommended Post Pattern
0.70
×
0.60
[ .028
×
.024 ]
or
0.64
×
0.64
[ .025
×
.025 ]
Square Post (Nominal)
Round Post (Nominal)
4.20 Min
[ .195 ]
mm
[Inch]
Tolerance Unless Noted
.0
mm
.00
.000
±
.3
±
.13
[ ] Dimensions for
Reference only
Note:
1. Ends of posts to be located within 0.25 [ .01 ] TPD at post end.
TS-0585-B
Sheet 3 of 3
3M
Interconnect Solutions
http://www.3M.com/interconnects/
3M is a trademark of 3M Company.
For technical, sales or ordering information call
800-225-5373
Regulatory Information Appendix
3M Electronic Solutions Division/Interconnect
EUROPE
Appendix E1: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product is RoHS Compliant 2005/95/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E2: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in the compliant pin area in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/747/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E3: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment as
amended by Commission Decision 2005/618/EC.
This product contains lead in the solder tail area in excess of the maximum concentration value allowed.
Unless otherwise stated by 3M in writing, this information represents 3M’s best knowledge and belief based upon information
provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix E4: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical & Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains decaBDE in the insulating material in excess of the maximum concentration value allowed but is
compliant by exemption under EU Commission Decision 2005/717/EC.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
RIA-2217B-c
Appendix E5: European Union RoHS
Directive 2002/95/EC, Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment, as
amended by EU Commission Decision 2005/618/EC.
This product contains lead in excess of the maximum concentration value allowed but is compliant by exemption under
Item 6 of the Annex to the Directive.
“RoHS Compliant 2005/95/EC” means that the product or part (“Product”) does not contain any of the substances in excess of
the maximum concentration values in EU Directive 2002/95/EC, as amended by Commission Decision 2005/618/EC, unless
the substance is in an application that is exempt under EU RoHS. Unless otherwise stated by 3M in writing, this information
represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
CHINA
Appendix C1: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means
that the product or part
does not
contain any of the following substances in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
In the event any product is proven not to conform with 3M’s Regulatory Information Appendix, then 3M’s entire liability and
Buyer’s exclusive remedy will be in accordance with the Warranty stated below.
Appendix C2: China RoHS
Electronic Industry Standard of the People’s Republic of China, SJ/T11363-2006, Requirements for Concentration Limits for
Certain Hazardous Substances in Electronic Information Products.
This symbol, per Marking for the Control of Pollution Caused by Electronic Information Products, SJ/T11364-2006, means that
the product or part
does
contain a substance, as detailed in the chart below, in excess of the following maximum concentration
values in any homogeneous material: (a) 0.1% (by weight) for lead, mercury, hexavalent chromium, polybrominated biphenyls
or polybrominated diphenyl ethers; or (b) 0.01% (by weight) for cadmium. Unless otherwise stated by 3M in writing, this
information represents 3M’s best knowledge and belief based upon information provided by third party suppliers to 3M.
The numerical reference in the symbol above should not be construed as a representation regarding the product’s life or an
extension of a product warranty. The product warranty is stated below. In the event any product is proven not to conform with
3M’s Regulatory Information Appendix, then 3M’s entire liability and Buyer’s exclusive remedy will be in accordance with the
product Warranty stated below.
RIA-2217B-c
京公网安备 11010802033920号
EEWORLD
